CC2592
- Seamless Interface to 2.4-GHz Low-Power RF Devices from Texas Instruments
- +22-dBm Output Power
- 3-dB Typical Improved Sensitivity on CC2520, CC253X, and CC85XX
- Very Few External Components
- Integrated Switches
- Integrated Matching Network
- Integrated Balun
- Integrated Inductors
- Integrated PA
- Integrated LNA
- Digital Control of LNA Gain by HGM Terminal
- 100 nA in Power Down (LNA_EN = PA_EN = 0)
- Low-Transmit Current Consumption
- 155 mA at 3 V for +22 dBm, PAE = 34%
- Low-Receive Current Consumption
- 4.0-mA for High-Gain Mode
- 1.9-mA for Low-Gain Mode
- 4.7-dB LNA Noise Figure, Including T/R Switch and External Antenna Match
- RoHS Compliant 4-mm × 4-mm QFN-16 Package
- 2.0-V to 3.7-V Operation
- –40°C to +125°C Operation
The CC2592 device is a cost-effective and high-performance RF front end for low-power and low-voltage 2.4-GHz wireless applications.
The CC2592 device is a range extender for all CC25XX 2.4-GHz low-power RF transceivers, transmitters, and system-on-chip products from Texas Instruments.
To increase the link budget, the CC2592 device provides a power amplifier for increased output power and an LNA with a low-noise figure for improved receiver sensitivity.
The CC2592 device provides a very small size, high-output power RF design with its 4-mm × 4-mm QFN-16 package.
The CC2592 device contains PA, LNA, switches, RF-matching, and balun for simple design of high-performance wireless applications.
技術文件
| 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | CC2592 2.4-GHz Range Extender datasheet | 2014年 2月 25日 | |
| Application note | CE Regulations for SRDs Operating in License-Free 2.4GHz/5GHz Bands-WiFi Devices (Rev. A) | PDF | HTML | 2022年 10月 20日 | |
| Application note | Debugging Communication Range (Rev. A) | PDF | HTML | 2019年 5月 23日 | |
| Application note | Using CC2592 Front End with CC2530 (Rev. A) | PDF | HTML | 2015年 7月 29日 | |
| More literature | CC2592 Evaluation Module Quick Start Guide | 2015年 3月 4日 | ||
| White paper | 6LoWPAN Demystified - 6LoWPAN Demystifed – A Low Power IP Mesh Network | 2014年 10月 28日 | ||
| Application note | AN130 - Using CC2592 Front End with CC2538 | 2014年 2月 27日 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
RDCR-3P-RADIO-MOD — Radiocrafts 嵌入式無線電模組
CC2538-CC2592EMK — CC2538-CC2592 評估模組套件
The CC2538-CC2592EMK demonstrates the use of the CC2592 PA/LNA front end together with the CC2538 IEEE 802.15.4 System-on-Chip. The CC2592 RF front end includes PA, LNA, switches, balun, and RF matching, and will increase output power and improve receiver sensitivity on a 2.4 GHz low-power RF (...)
CC-ANTENNA-DK2 — 用於 LaunchPad™ 和 SensorTag 的 Sub-1 GHz 和 2.4GHz 天線套件
這款全新天線套件可讓您執行實際測試,為您的應用找出最佳天線!天線套件包含頻率從 169MHz 到 2.4GHz 的 16 個天線,包括 PCB 天線、螺旋天線和晶片天線,以及與 2.4GHz 結合的 868/915MHz 雙頻帶天線。
天線套件包含一條 uSMA(JSC) 纜線,可連接無線 LaunchPad 和 SensorTag。下列套件可和 JSC 連接器相容:
- LAUNCHXL-CC2650
- LAUNCHXL-CC1310
- LAUNCHXL-CC1350
- CC1350STK
此套件還包括 uSMA(JSC)-SMA 連接器,可將套件或天線連接至標準 SMA 連接器。
(...)
3P-WIRELESS-MODULES — 第三方無線模組搜尋工具
SIMPLELINK-2-4GHZ-DESIGN-REVIEWS — SimpleLink™ CC2xxx 裝置的硬體設計審核
入門指南
一般設計問題應張貼在我們的 E2E 討論區中,然後才能要求 2.4 GHz 硬體設計審查。
請確實備妥下列必要文件,隨硬體設計審查申請表一起傳送:
- 確認產品頁上提供的所有硬體文件均已經過審查,例如產品規格表、設計指南、使用指南和其他硬體資源
- 電路圖的可攜式文件格式 (PDF) 版本可供檢閱
- 物料清單 (BOM) 可供檢閱
- 堆疊詳細資料可供檢閱
- 電路板設計的 Gerber 檔案 (含零件位置和參考指示項) (...)
TIDC-CC2530-CC2592EMK-RD — 具有 120dB 鏈路預算的 ZigBee CC2530 無線 MCU 和 CC2592 增距器參考設計
TIDC-CC2650-CC2592-EMK — SimpleLink™ CC2650 無線 MCU 和 CC2592 增距器參考設計 - 122dB 鏈路預算
CC2530-CC2592EM-RD — SimpleLink™ ZigBee® 網路增距器參考設計
CC2592EMK-RD — 獨立 2.4GHz 增距器參考設計
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| VQFN (RGV) | 16 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。