首頁 電池管理 IC 電池監控器和平衡器
首頁
電池管理 IC
電池監控器和平衡器

BQ79606A-Q1

現行

符合 ASIL-D 規範的 6 節串聯車用精密電池監控器、平衡器和整合式保護器

立即訂購
產品規格表

現在提供此產品的更新版本

open-in-new 比較替代產品
功能相同，但引腳輸出與所比較的裝置不同
BQ79616-Q1 現行 符合 ASIL-D 規範的 16-S 車用精密電池監控器、平衡器及整合式保護器 ASIL-D compliant with improved cell voltage measurements within 200 µs for all cell channels and balancing current up to 240 mA

BQ79606A-Q1

現行
產品規格表 立即訂購

產品詳細資料

Rating Automotive Number of series cells (max) 6 Number of series cells (min) 3 Features Cell balancing, Integrated ADC, Multi-cell support, Open-wire detection, Overtemperature protection, Overvoltage protection, Separate MCU requirement, Stackable (built-in interface), Temperature sensing, Undertemperature protection, Undervoltage protection Vin (max) (V) 33 Communication interface Differential Daisy Chain, UART Device type Cell monitor and balancer Operating temperature range (°C) -40 to 105 Battery overvoltage protection (min) (V) 2 Battery overvoltage protection (max) (V) 5 TI functional safety category Functional Safety-Compliant Operating current (typ) (µA) 4200
Rating Automotive Number of series cells (max) 6 Number of series cells (min) 3 Features Cell balancing, Integrated ADC, Multi-cell support, Open-wire detection, Overtemperature protection, Overvoltage protection, Separate MCU requirement, Stackable (built-in interface), Temperature sensing, Undertemperature protection, Undervoltage protection Vin (max) (V) 33 Communication interface Differential Daisy Chain, UART Device type Cell monitor and balancer Operating temperature range (°C) -40 to 105 Battery overvoltage protection (min) (V) 2 Battery overvoltage protection (max) (V) 5 TI functional safety category Functional Safety-Compliant Operating current (typ) (µA) 4200
HTQFP (PHP) 48 81 mm² 9 x 9
  • Qualified for automotive applications
  • AEC-Q100 Qualified with the following results:
    • Device temperature grade 2: –40°C to +105°C ambient operating temperature range
    • Device HBM ESD classification level 2
    • Device CDM ESD classification level C4B
  • Voltage monitor, temperature monitor and communication functions: SafeTI™-26262 ASIL-D compliant
  • ± 1.1mV Cell voltage measurement accuracy with an offset
  • Configurable digital low pass filter as low as 1.2Hz
  • Supports simultaneous cell voltage measurements
    • Full-accuracy stack measurements in less than 1 ms (for 96 cells)
  • Optional ring architecture to ensure stack communication even with communication cable break
  • Monitors 3 to 6 cell connections and up to 6 NTC/auxiliary channels
    • Integrated 16-bit analog-to-digital converters (ADC)
  • Integrated high-voltage AFE filter components
  • Designed for robust hot-plug performance
  • Stackable configuration up to 64 devices (1 base + 63 stack, 384-series cells)
  • Isolated differential daisy chain communication
    • Supports transformer or capacitor based isolation
  • Configurable SINC3 digital filter
  • Integrated hardware protector
    • Secondary protection for cell overtemperature and undertemperature
    • Secondary protection for cell overvoltage and undervoltage
  • Hardware protector function: SafeTI™-26262 ASIL-B compliant
  • Integrated cell-balancing MOSFET’s up to 150 mA
  • Designed to pass BCI testing
  • UART Host interface
  • Qualified for automotive applications
  • AEC-Q100 Qualified with the following results:
    • Device temperature grade 2: –40°C to +105°C ambient operating temperature range
    • Device HBM ESD classification level 2
    • Device CDM ESD classification level C4B
  • Voltage monitor, temperature monitor and communication functions: SafeTI™-26262 ASIL-D compliant
  • ± 1.1mV Cell voltage measurement accuracy with an offset
  • Configurable digital low pass filter as low as 1.2Hz
  • Supports simultaneous cell voltage measurements
    • Full-accuracy stack measurements in less than 1 ms (for 96 cells)
  • Optional ring architecture to ensure stack communication even with communication cable break
  • Monitors 3 to 6 cell connections and up to 6 NTC/auxiliary channels
    • Integrated 16-bit analog-to-digital converters (ADC)
  • Integrated high-voltage AFE filter components
  • Designed for robust hot-plug performance
  • Stackable configuration up to 64 devices (1 base + 63 stack, 384-series cells)
  • Isolated differential daisy chain communication
    • Supports transformer or capacitor based isolation
  • Configurable SINC3 digital filter
  • Integrated hardware protector
    • Secondary protection for cell overtemperature and undertemperature
    • Secondary protection for cell overvoltage and undervoltage
  • Hardware protector function: SafeTI™-26262 ASIL-B compliant
  • Integrated cell-balancing MOSFET’s up to 150 mA
  • Designed to pass BCI testing
  • UART Host interface

The BQ79606A-Q1 device provides simultaneous, high accuracy, channel measurements for three to six battery cells. With the inclusion of a daisy chain communication port, the BQ79606A-Q1 device is stackable (up to 64 devices) to support the large stack configurations found in battery packs for electrified automotive drive trains. Providing a Delta Sigma converter per cell input, the BQ79606A-Q1 allows simultaneous measurement of the battery voltages.

The BQ79606A-Q1 includes an auxiliary ADC that supports cell temperature measurements for up to six NTCs as well as internal rails to enable safety checks for the device. A die temperature measurement ADC is also included to provide temperature correction to enable high accuracy results over an extended temperature range.

Host communication to the BQ79606A-Q1 device is done via dedicated UART interface. Additionally, an isolated, differential daisy-chain communication interface that supports either capacitor or transformer isolation allows the host to communicate with the entire battery stack. The daisy-chain communication interface can be configured (optional) in a ring architecture that allows the host to talk to devices at either end of the stack in cases of communication line breaks.

The BQ79606A-Q1 device provides simultaneous, high accuracy, channel measurements for three to six battery cells. With the inclusion of a daisy chain communication port, the BQ79606A-Q1 device is stackable (up to 64 devices) to support the large stack configurations found in battery packs for electrified automotive drive trains. Providing a Delta Sigma converter per cell input, the BQ79606A-Q1 allows simultaneous measurement of the battery voltages.

The BQ79606A-Q1 includes an auxiliary ADC that supports cell temperature measurements for up to six NTCs as well as internal rails to enable safety checks for the device. A die temperature measurement ADC is also included to provide temperature correction to enable high accuracy results over an extended temperature range.

Host communication to the BQ79606A-Q1 device is done via dedicated UART interface. Additionally, an isolated, differential daisy-chain communication interface that supports either capacitor or transformer isolation allows the host to communicate with the entire battery stack. The daisy-chain communication interface can be configured (optional) in a ring architecture that allows the host to talk to devices at either end of the stack in cases of communication line breaks.
filter 尋找其它 電池監控器和平衡器
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 12
類型 標題 日期
* Data sheet BQ79606A-Q1 SafeTI™ Precision Monitor With Integrated Hardware Protector for Automotive Battery Pack Applications datasheet PDF | HTML 2019年 4月 25日
White paper Wired vs. Wireless Communications In EV Battery Management (Rev. A) PDF | HTML 2023年 6月 6日
Functional safety information Functional Safety Considerations in Battery Management for Vehicles 2020年 9月 17日
Application note BQ79606A-Q1 Software Design Reference (Rev. E) 2019年 8月 7日
Application note BQ79606 Daisy Chain Communication Robustness and Timing 2019年 6月 26日
Technical article Eight questions about monitoring and protection in hybrid and electric vehicles PDF | HTML 2019年 5月 22日
Functional safety information Safety Manual for BQ79606A-Q1 Precision Monitor (Rev. C) 2019年 5月 6日
Design guide Scalable Automotive HEV/EV 6s to 96s Li-Ion Cell Supervision Demonstrator (Rev. A) 2019年 4月 30日
User guide BQ79606A-Q1 GUI User's Guide (Rev. C) 2019年 4月 29日
Application note BQ79606A-Q1 Design Recommendation (Rev. C) 2019年 4月 26日
EVM User's guide BQ79606A-Q1 Evaluation Module (Rev. E) 2019年 4月 26日
Application note BQ79606AA-Q1 Example Bring Up Procedure 2018年 3月 16日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

BQ79606EVM-897 — 具有整合保護器的 6 通道精密監測器評估模組

bq79606EVM 是適用於 bq79606A-Q1 的評估電路板。bq79606A-Q1 可同時對三至六個電池芯提供高精度的通道量測。*bq79606A-Q1 內建菊鍊通訊埠，且可堆疊（最多 64 個裝置），以支援電動車傳動系統電池組的大型堆疊配置。bq79606A-Q1 為每個電池芯輸入提供 Delta Sigma 轉換器，實現電池電壓的同步量測，提供電池芯電壓的真實快照。最多可堆疊 64 塊 bq79606EVM 電路板，以支援超大型電池組。

使用指南: PDF
TI.com 無法提供
程式碼範例或展示

BQ79606A-EXAMPLE-CODE — 車用電池組應用的 BQ79606A-Q1 範例程式碼

The BQ79606A-EXAMPLE-CODE is BQ79606A-Q1 example code of automotive battery pack applications for the Hercules™ LAUNCHXL-TMS57004 LaunchPad™ development kit.
下載
驅動程式或資料庫

BQ79606-Q1-DESIGN — Design & Other Doc Files for BQ79606-Q1

Design & Other Doc Files for BQ79606-Q1
支援產品和硬體

支援產品和硬體

產品
電池監控器和平衡器
  • BQ79606A-Q1 — 符合 ASIL-D 規範的 6 節串聯車用精密電池監控器、平衡器和整合式保護器
要求
驅動程式或資料庫

BQ79606-Q1-EXAMPLE-CODE — Example Code Files for BQ79606-Q1

Example Code Files for BQ79606-Q1
支援產品和硬體

支援產品和硬體

產品
電池監控器和平衡器
  • BQ79606A-Q1 — 符合 ASIL-D 規範的 6 節串聯車用精密電池監控器、平衡器和整合式保護器
要求
驅動程式或資料庫

BQ79606A-AUTOSAR-CDD — BQ79606A Complex Device Driver software

BQ79606A Complex Device Driver software
支援產品和硬體

支援產品和硬體

產品
電池監控器和平衡器
  • BQ79606A-Q1 — 符合 ASIL-D 規範的 6 節串聯車用精密電池監控器、平衡器和整合式保護器
要求
驅動程式或資料庫

BQ79606A-Q1-FMEDA — BQ79606A-Q1 FMEDA files

BQ79606A-Q1 FMEDA files
支援產品和硬體

支援產品和硬體

產品
電池監控器和平衡器
  • BQ79606A-Q1 — 符合 ASIL-D 規範的 6 節串聯車用精密電池監控器、平衡器和整合式保護器
要求
模擬工具

MNOVA-3P-NOVACARTS — MicroNova NovaCarts cell module controller (CMC) simulator for validating battery management systems

The NovaCarts cell module controller (CMC) simulation can simulate up to 35 cell monitoring integrated circuits of the automotive battery cell monitors family. The simulator is connected to the battery management system (BMS) host via a daisy chain interface. Typical applications of the simulator (...)
從：MicroNova
造訪合作夥伴網站
封裝 針腳 CAD 符號、佔位空間與 3D 模型
HTQFP (PHP) 48 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片