首頁 電池管理 IC 電池充電器 IC
首頁
電池管理 IC
電池充電器 IC

BQ25970

現行

適用並聯充電應用和外部 OVP 支援的 I2C 單芯 8A 開關電容電池充電器

立即訂購
產品規格表

BQ25970

現行
產品規格表 立即訂購

產品詳細資料

Rating Catalog Number of series cells 1 Cell chemistry Li-Ion/Li-Polymer, Lithium Phosphate/LiFePO4 Charge current (max) (A) 8 Features BAT temp thermistor monitoring (hot/cold profile), IC thermal regulation, Input OVP, Integrated ADC Vin (min) (V) 3.2 Vin (max) (V) 12 Absolute max Vin (max) (V) 20 Control topology Flash Charger Battery charge voltage (min) (V) 3.5 Battery charge voltage (max) (V) 4.65 Control interface I2C Operating temperature range (°C) -40 to 85
Rating Catalog Number of series cells 1 Cell chemistry Li-Ion/Li-Polymer, Lithium Phosphate/LiFePO4 Charge current (max) (A) 8 Features BAT temp thermistor monitoring (hot/cold profile), IC thermal regulation, Input OVP, Integrated ADC Vin (min) (V) 3.2 Vin (max) (V) 12 Absolute max Vin (max) (V) 20 Control topology Flash Charger Battery charge voltage (min) (V) 3.5 Battery charge voltage (max) (V) 4.65 Control interface I2C Operating temperature range (°C) -40 to 85
DSBGA (YFF) 56 10.7999999999999988 mm² (— mm × — mm)
  • 97% Efficient power stage for 8-A fast charge
  • Patent pending switched cap charger architecture optimized for 50% duty cycle
    • Input voltage is 2x battery voltage (3.5 V to 4.65 V)
    • Output current is 2x of input current (up to
      4.5 A)
    • Reduces power loss across the cable
  • Integrated programmable protection features for safe operation
    • Input over-voltage protection (BUS_OVP)
    • Input over-current protection (BUS_OCP) with adjustable alarm
    • Input over-voltage with external OVP FET (VAC_OVP up to 17 V, BQ25970 only)
    • Battery over-voltage protection (BAT_OVP) with adjustable alarm
    • Output over-voltage (VOUT_OVP)
    • Input over-current protection (BUS_OCP) with adjustable alarm
    • IBAT over-current protection (BAT_OCP) with adjustable alarm
    • Switching MOSFET cycle by cycle current limit
    • Battery temperature monitoring
    • Connector Temperature Monitoring
  • Programmable settings for system optimization
    • Optional VBATREG and IBATREG regulation for system load and wall adapter transients (BQ25970 only with External OVP FET)
    • STAT, FLAG, and MASK options for interrupts
    • ADC Readings and configuration
  • Integrated 12-bit effective analog-to digital converter (ADC)
    • ±0.5% BUS Voltage
    • ±0.5% VOUT Voltage
    • –0.4% to 0.2% BAT Voltage with differential sensing
    • ±1.5% BAT Current at 6 A with external RSENSE
    • ±1% BAT Temperature
    • ±1% BUS Temperature
    • ±4°C Die temperature
  • 97% Efficient power stage for 8-A fast charge
  • Patent pending switched cap charger architecture optimized for 50% duty cycle
    • Input voltage is 2x battery voltage (3.5 V to 4.65 V)
    • Output current is 2x of input current (up to
      4.5 A)
    • Reduces power loss across the cable
  • Integrated programmable protection features for safe operation
    • Input over-voltage protection (BUS_OVP)
    • Input over-current protection (BUS_OCP) with adjustable alarm
    • Input over-voltage with external OVP FET (VAC_OVP up to 17 V, BQ25970 only)
    • Battery over-voltage protection (BAT_OVP) with adjustable alarm
    • Output over-voltage (VOUT_OVP)
    • Input over-current protection (BUS_OCP) with adjustable alarm
    • IBAT over-current protection (BAT_OCP) with adjustable alarm
    • Switching MOSFET cycle by cycle current limit
    • Battery temperature monitoring
    • Connector Temperature Monitoring
  • Programmable settings for system optimization
    • Optional VBATREG and IBATREG regulation for system load and wall adapter transients (BQ25970 only with External OVP FET)
    • STAT, FLAG, and MASK options for interrupts
    • ADC Readings and configuration
  • Integrated 12-bit effective analog-to digital converter (ADC)
    • ±0.5% BUS Voltage
    • ±0.5% VOUT Voltage
    • –0.4% to 0.2% BAT Voltage with differential sensing
    • ±1.5% BAT Current at 6 A with external RSENSE
    • ±1% BAT Temperature
    • ±1% BUS Temperature
    • ±4°C Die temperature

The BQ2597x is a 97% efficient, 8-A battery charging solution using a switched cap architecture. This architecture and the integrated FETs are optimized to enable a 50% duty cycle, allowing the cable current to be half the current delivered to the battery, reducing the losses over the charging cable as well as limiting the temperature rise in the application.

The dual-phase architecture reduces the input cap requirements as well as reducing the output voltage ripple. When used with a standard charger such as the BQ2589x, the system enables the fastest charging at the lowest power loss from pre-charge through CC, CV, and termination.

The device integrates all the necessary protection features to ensure safe charging, including input over-voltage and over-current protection, output over-voltage and over-current protection, temperature sensing for the battery and cable, and monitoring the die temperature.

The device includes a 12-bit effective analog-to-digital converter (ADC) to provide bus voltage, bus current, output voltage, battery voltage, battery current, bus temperature, bat temperature, die temperature, and other calculated measurements needed to manage the charging of the battery from the smart wall adapter or power bank.

The BQ2597x is a 97% efficient, 8-A battery charging solution using a switched cap architecture. This architecture and the integrated FETs are optimized to enable a 50% duty cycle, allowing the cable current to be half the current delivered to the battery, reducing the losses over the charging cable as well as limiting the temperature rise in the application.

The dual-phase architecture reduces the input cap requirements as well as reducing the output voltage ripple. When used with a standard charger such as the BQ2589x, the system enables the fastest charging at the lowest power loss from pre-charge through CC, CV, and termination.

The device integrates all the necessary protection features to ensure safe charging, including input over-voltage and over-current protection, output over-voltage and over-current protection, temperature sensing for the battery and cable, and monitoring the die temperature.

The device includes a 12-bit effective analog-to-digital converter (ADC) to provide bus voltage, bus current, output voltage, battery voltage, battery current, bus temperature, bat temperature, die temperature, and other calculated measurements needed to manage the charging of the battery from the smart wall adapter or power bank.

filter 尋找其它 電池充電器 IC
下載 觀看有字幕稿的影片 影片

更多資訊和樣品供貨情況

  • 提供完整產品規格表和其他資訊。立即索取
  • 若您想考慮使用符合通用標準、高達 20V 的 USB Type-C PD 埠為充電器供電，請考慮 TPS25750

您可能會感興趣的類似產品

open-in-new 比較替代產品
針腳對針腳的功能與所比較的裝置相同。
BQ25968 現行 I2C 控制單芯、高效、ADC、6-A 切換式電容快速充電器 Same footprint with 6-A charging current.
功能相同，但針腳輸出與所比較的裝置不同。
BQ25960 現行 具有旁路和雙輸入選擇器的 I2C 控制 1 芯 8-A 開關電容並聯電池充電器 Small footprint with same performance

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 2
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 BQ25970, BQ25971 I2C Controlled Single Cell High Efficiency 8-A Switched Cap Fast Chargers With ADC datasheet (Rev. B) PDF | HTML 2020/4/20
應用說明 How to use the BQ25970 for Flash Charging (Rev. A) PDF | HTML 2022/10/20

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

參考設計

TIDA-01582 — 適用於 USB 電力傳輸可編程電源供應的開關電容快速充電參考設計

此參考設計的目標是展示在智慧型手機應用中使用切換式電容快速充電拓撲結構時的總體系統性能。此系統採用智慧型壁式轉接器，其可支援 USB 電力傳輸 (PD) 可編程電源供應器 (PPS) 規格，以減少充電纜線的損耗，並減少智慧型手機的損耗和溫度上升。bq25970 是 TI 首款可提供高達 8A 電池充電電流的切換式電容充電器。
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
DSBGA (YFF) 56 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片