首頁 電池管理 IC 電池充電器 IC
首頁
電池管理 IC
電池充電器 IC

BQ25883

現行

採用 WQFN 封且具電源路徑的 USB 輸入用 I2C 2 節 2A 升壓電池充電器

立即訂購
產品規格表

BQ25883

現行
產品規格表 立即訂購

產品詳細資料

Rating Catalog Number of series cells 2 Cell chemistry Li-Ion/Li-Polymer Charge current (max) (A) 2 Features BAT temp thermistor monitoring (JEITA profile), IC thermal regulation, ICO (Input Current Optimization), IINDPM (Input current limit), Input OVP, Integrated ADC, Integrated LDO, Power Path, USB C/PD compatible, USB D+/D-/BC1.2 integrated, USB OTG integrated, VINDPM (Input voltage threshold to maximize adaptor power) Vin (min) (V) 3.9 Vin (max) (V) 6.2 Absolute max Vin (max) (V) 20 Control topology Switch-Mode Boost Battery charge voltage (min) (V) 6.8 Battery charge voltage (max) (V) 9.2 Control interface I2C Operating temperature range (°C) -40 to 85
Rating Catalog Number of series cells 2 Cell chemistry Li-Ion/Li-Polymer Charge current (max) (A) 2 Features BAT temp thermistor monitoring (JEITA profile), IC thermal regulation, ICO (Input Current Optimization), IINDPM (Input current limit), Input OVP, Integrated ADC, Integrated LDO, Power Path, USB C/PD compatible, USB D+/D-/BC1.2 integrated, USB OTG integrated, VINDPM (Input voltage threshold to maximize adaptor power) Vin (min) (V) 3.9 Vin (max) (V) 6.2 Absolute max Vin (max) (V) 20 Control topology Switch-Mode Boost Battery charge voltage (min) (V) 6.8 Battery charge voltage (max) (V) 9.2 Control interface I2C Operating temperature range (°C) -40 to 85
VQFN (RGE) 24 16 mm² 4 x 4
  • High-efficiency 2-A, 1.5MHz switch mode boost charger
    • 93.4% Charge efficiency at 5V adapter, 7.6-V battery, 1-A charge
    • Optimized for USB input and 2-cell Li-Ion battery
    • Selectable low power PFM mode for light load operation
  • Single input to support USB input adapters
    • Supports 3.9 V – 6.2 V input voltage range with 20-V absolute maximum input voltage rating
    • Input current limit (500 mA to 3.3 A with 100-mA resolution) to support USB2.0, USB3.0 standard adapters
    • Maximum power tracking by input voltage limit up-to 5.5 V
    • Integrated USB D+/D- auto-detect USB SDP, CDP, DCP, and non-standard adapters
  • Power path management and I2C control
    • Highest battery discharge efficiency with 17mΩ battery discharge MOSFET
    • Narrow VDC (NVDC) power path management
      • Instant-on system on with no battery or deeply discharged battery
      • Ideal diode operation in battery supplement mode
  • USB on-the-go (OTG) with adjustable output from 4.5V to 5.5V
    • Buck converter with up-to 2 A output
    • 94% Efficiency at 5 V, 1 A output
    • Accurate constant current (CC) regulation and output short protection
    • Selectable low power PFM mode for light load operation with out-of-audio option
  • Input current optimizer (ICO) to maximize input power without overloading adapters
  • Integrated 16-bit ADC for system monitoring (BUS voltage and current, each cell voltage, charge current, SYS voltage, and NTC and die temperature)
  • High integration includes all MOSFETs, current sensing and loop compensation
  • High accuracy
    • ±0.5% Charge voltage regulation
    • ±5% Charge current regulation
    • ±7.5% Input current regulation
  • Safety
    • Battery temperature sensing in charge and OTG buck mode
    • Thermal regulation and thermal shutdown
  • High-efficiency 2-A, 1.5MHz switch mode boost charger
    • 93.4% Charge efficiency at 5V adapter, 7.6-V battery, 1-A charge
    • Optimized for USB input and 2-cell Li-Ion battery
    • Selectable low power PFM mode for light load operation
  • Single input to support USB input adapters
    • Supports 3.9 V – 6.2 V input voltage range with 20-V absolute maximum input voltage rating
    • Input current limit (500 mA to 3.3 A with 100-mA resolution) to support USB2.0, USB3.0 standard adapters
    • Maximum power tracking by input voltage limit up-to 5.5 V
    • Integrated USB D+/D- auto-detect USB SDP, CDP, DCP, and non-standard adapters
  • Power path management and I2C control
    • Highest battery discharge efficiency with 17mΩ battery discharge MOSFET
    • Narrow VDC (NVDC) power path management
      • Instant-on system on with no battery or deeply discharged battery
      • Ideal diode operation in battery supplement mode
  • USB on-the-go (OTG) with adjustable output from 4.5V to 5.5V
    • Buck converter with up-to 2 A output
    • 94% Efficiency at 5 V, 1 A output
    • Accurate constant current (CC) regulation and output short protection
    • Selectable low power PFM mode for light load operation with out-of-audio option
  • Input current optimizer (ICO) to maximize input power without overloading adapters
  • Integrated 16-bit ADC for system monitoring (BUS voltage and current, each cell voltage, charge current, SYS voltage, and NTC and die temperature)
  • High integration includes all MOSFETs, current sensing and loop compensation
  • High accuracy
    • ±0.5% Charge voltage regulation
    • ±5% Charge current regulation
    • ±7.5% Input current regulation
  • Safety
    • Battery temperature sensing in charge and OTG buck mode
    • Thermal regulation and thermal shutdown

The BQ25883 is a highly-integrated 2-A boost switch-mode battery charge management and system power path management device for 2-cell (2s) Li-Ion and Li-polymer battery. The BQ25883 has I2C control with OTG and power path.

The BQ25883 is a highly-integrated 2-A boost switch-mode battery charge management and system power path management device for 2-cell (2s) Li-Ion and Li-polymer battery. The BQ25883 has I2C control with OTG and power path.
filter 尋找其它 電池充電器 IC
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相同，但引腳輸出與所比較的裝置不同
BQ25882 現行 採用 WCSP 封且具電源路徑的 USB 輸入用 I2C 2 芯 2A 升壓電池充電器 This product is 2A, 2S I2C boost charger in a WCSP package
BQ25887 現行 適用於 USB 輸入、整合式電池芯平衡的 I2C 2 節 2A 升壓電池充電器 This product is 2A, 2S I2C boost charger in a WQFN package and 400mA integrated Cell-balancing

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 4
類型 標題 日期
* Data sheet BQ25883 2-Cell, 2-A Boost-Mode Battery Charger With Power Path, USB On-The-Go Boost (OTG) For USB Input datasheet (Rev. A) PDF | HTML 2019年 4月 12日
Application note State of Charge Estimation Using Smart Battery Charger PDF | HTML 2021年 10月 11日
Technical article 4 Reasons why you should use a boost charger for 2-cell battery application PDF | HTML 2019年 4月 3日
User guide BQ25883 QFN boost-mode battery charger evaluation module 2019年 2月 5日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

BQ25883EVM — 升壓電池充電器評估模組

透過舊式 5V USB 連接埠為 2 芯 8.4V 電池組充電時需要一個升壓充電器。BQ25883 是一款高度整合的 2A 升壓、1.5MHz 開關模式電池充電管理，具備動態電源路徑管理功能，適用於 2-s 鋰離子及鋰聚合物電池。具有充電和電池芯平衡設定功能的 I2C 序列介面使此裝置成為真正靈活的解決方案。OTG 降壓操作允許輸入連接埠從電池供電。
使用指南: PDF
TI.com 無法提供
開發板

BQ25887EVM — 使用電池平衡的升壓電池充電器評估模組

透過舊式 5V USB 連接埠為 2 芯 8.4V 電池充電時需要一個升壓充電器。BQ25887 是一款高度整合的 2A 升壓、1.5MHz 切換模式電池充電管理，具備適用於 2-s 鋰離子和鋰聚合物電池芯平衡功能。具有充電和電池芯平衡設定功能的 I2C 序列介面使此裝置成為真正靈活的解決方案。OTG 降壓操作允許輸入連接埠從電池供電。
使用指南: PDF
TI.com 無法提供
介面轉接器

EV2400 — 適用電池電量 (氣量) 計評估模組的 USB PC 介面板

The EV2400 EVM interface board enables an IBM-compatible or other type PC (with the required driver for its particular platform) to communicate with the Texas Instruments SMBus or I2C interface gas gauges via a Universal Serial Bus (USB) port. In addition to this board, PC software is required to (...)

使用指南: PDF
TI.com 無法提供
參考設計

PMP40496 — 具有 5V USB 的 2 芯升壓充電系統參考設計

此 5V USB、2 芯電池升壓充電器參考設計包含充電系統和內建電量計的 2 芯電池座，可透過纜線連接或獨立運作。充電器系統的主要元件包括 BQ25883 升壓充電器、TUSB320LAI Type-C CC 邏輯、MSP430FR2433 微控制器 (MCU)、OLED 顯示器，以及 USB Type-C 和 Micro B 接頭。電池電量計採用 BQ28Z610，搭配 BQ25883 的內部 ADC，可顯示充電與電池參數。此設計可透過訊號接頭 J5 連接至您的系統，實現隨插即用的完整解決方案。此設計適用於可攜式電子產品應用，例如 POS、Bluetooth® 喇叭及可攜式印表機。
Test report: PDF
電路圖: PDF
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN (RGE) 24 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片