AMC0380D
- Integrated, high-voltage resistive divider for direct AC voltage sensing without external resistors
- Differential output
- Supply voltage range:
- High-side (VDD1): 3.0V to 5.5V
- Low-side (VDD2): 3.0V to 5.5V
- Low DC errors:
- Offset error: ±0.8mV (maximum)
- Offset drift: ±10µV/°C (maximum)
- Attenuation error: ±0.25% (maximum)
- Attenuation drift: ±40ppm/°C (maximum)
- Nonlinearity: 0.025% (maximum)
- High CMTI: 150V/ns (minimum)
- Low EMI: Meets CISPR-11 and CISPR-25 limits
- Available input options:
- AMC0380D04: ±400V, 8.3MΩ
- AMC0380D06: ±600V, 10MΩ
- Safety-related certifications:
- 7000VPK reinforced isolation per DIN EN IEC 60747-17 (VDE 0884-17)
- 5000VRMS isolation for 1 minute per UL 1577
- Fully specified over the extended industrial temperature range: –40°C to +125°C
The AMC0380D is a precision, galvanically isolated amplifier with a high-voltage AC, high impedance input, and fixed-gain differential output. The input is designed to connect directly to a high-voltage signal source.
The isolation barrier separates parts of the system that operate on different common-mode voltage levels. The isolation barrier is highly resistant to magnetic interference and is certified to provide reinforced isolation up to 5kVRMS (60s).
The AMC0380D outputs a differential signal proportional to the input voltage. The differential output is insensitive to ground shifts and enables routing the output signal over long distances.
The AMC0380D is available in two linear input voltage ranges: ±400 and ±600V. With an integrated precision resistive divider, the AMC0380D achieves better than 1% accuracy over the full temperature range, including lifetime drift.
The AMC0380D is available in a 15-pin, 0.65mm pitch SSOP package. The device is fully specified over the temperature range from –40°C to +125°C.
技術文件
| 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | AMC0380D Precision, High-Voltage AC Input, Reinforced Isolated Amplifier With Fixed-Gain Differential Output datasheet (Rev. A) | PDF | HTML | 2025年 11月 19日 |
| Application note | Pairing Isolated Amplifiers With SAR AD Converters | PDF | HTML | 2025年 9月 24日 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
AMC038XEVM — AMC038x 評估模組
AMC038x 評估模組 (EVM) 與其中一款 AMC038x 裝置結合,展示了高精密度、高電壓感測設計。此評估模組最高可測量 1600V 的輸入電壓,無需外部電壓分壓電阻器。此設計也包括分離式電源解決方案,可從低壓側電源產生高壓側電源。
SBAR020 — Isolated Amplifier Current Sensing Excel Calculator
支援產品和硬體
產品
隔離式放大器
隔離式 ADC
精確 ADC
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
PSpice for TI 設計和模擬環境可讓您使用其內建函式庫來模擬複雜的混合訊號設計。在進行佈局和製造之前,建立完整的終端設備設計和解決方案原型,進而縮短上市時間並降低開發成本。
在 PSpice for TI 設計與模擬工具中,您可以搜尋 TI (...)
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| SSOP (DFX) | 15 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點