首頁 邏輯和電壓轉換 電壓轉換器及電平移位器 電壓轉換器
首頁
邏輯和電壓轉換
電壓轉換器及電平移位器
電壓轉換器

2N7001T-Q1

現行

車用 1 位元雙電源緩衝電壓訊號轉換器

立即訂購
產品規格表

2N7001T-Q1

現行
產品規格表 立即訂購

產品詳細資料

Bits (#) 1 Data rate (max) (Mbps) 100 Topology Push-Pull Direction control (typ) Fixed-direction Vin (min) (V) 1.65 Vin (max) (V) 3.6 Vout (min) (V) 1.65 Vout (max) (V) 3.6 Applications GPIO Features Partial power down (Ioff), Vcc isolation Prop delay (ns) 20 Technology family 2N Supply current (max) (mA) 0.014 Rating Automotive Operating temperature range (°C) -40 to 125
Bits (#) 1 Data rate (max) (Mbps) 100 Topology Push-Pull Direction control (typ) Fixed-direction Vin (min) (V) 1.65 Vin (max) (V) 3.6 Vout (min) (V) 1.65 Vout (max) (V) 3.6 Applications GPIO Features Partial power down (Ioff), Vcc isolation Prop delay (ns) 20 Technology family 2N Supply current (max) (mA) 0.014 Rating Automotive Operating temperature range (°C) -40 to 125
SOT-SC70 (DCK) 5 4.2 mm² (2 mm × 2.1 mm)
  • Up and down translation across 1.65 V to 3.6 V
  • AEC-Q100 automotive qualified
  • Operating temperature grade 1: –40°C to +125°C
  • Maximum quiescent current (ICCA + ICCB) of 14 µA (125°C maximum)
  • Up to 100 Mbps support across the full supply range
  • VCC Isolation Feature
    • If either VCC input is below 100 mV, the output becomes high-impedance
  • Ioff supports partial-power-down mode operation
  • Latch-up performance exceeds 100 mA per JESD 78, Class II
  • ESD protection exceeds JEDEC JS-001
    • 2000-V human body model
    • 1000-V charged-device model
  • Up and down translation across 1.65 V to 3.6 V
  • AEC-Q100 automotive qualified
  • Operating temperature grade 1: –40°C to +125°C
  • Maximum quiescent current (ICCA + ICCB) of 14 µA (125°C maximum)
  • Up to 100 Mbps support across the full supply range
  • VCC Isolation Feature
    • If either VCC input is below 100 mV, the output becomes high-impedance
  • Ioff supports partial-power-down mode operation
  • Latch-up performance exceeds 100 mA per JESD 78, Class II
  • ESD protection exceeds JEDEC JS-001
    • 2000-V human body model
    • 1000-V charged-device model

The AEC-Q100 qualified 2N7001T-Q1 device is a single-bit buffered voltage signal converter that uses two separate configurable power-supply rails to up or down translate a unidirectional signal. The device is operational with both VCCA and VCCB supplies down to 1.65 V and up to 3.60 V. VCCA defines the input threshold voltage on the A input. VCCB defines the output drive voltage on the B output.

This device is fully specified for partial-power-down applications using the Ioff current. The Ioff protection circuitry ensures that no excessive current is drawn from or to an input, output, or combined I/O that is biased to a specific voltage while the device is powered down.

The VCC isolation feature ensures that if either VCCA or VCCB is less than 100 mV, the output port (B) enters a high-impedance state.

The AEC-Q100 qualified 2N7001T-Q1 device is a single-bit buffered voltage signal converter that uses two separate configurable power-supply rails to up or down translate a unidirectional signal. The device is operational with both VCCA and VCCB supplies down to 1.65 V and up to 3.60 V. VCCA defines the input threshold voltage on the A input. VCCB defines the output drive voltage on the B output.

This device is fully specified for partial-power-down applications using the Ioff current. The Ioff protection circuitry ensures that no excessive current is drawn from or to an input, output, or combined I/O that is biased to a specific voltage while the device is powered down.

The VCC isolation feature ensures that if either VCCA or VCCB is less than 100 mV, the output port (B) enters a high-impedance state.
filter 尋找其它 電壓轉換器
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相同，但針腳輸出與所比較的裝置不同。
TXU0101-Q1 現行 車用單通道固定方向位準移位器 Automotive one channel fixed direction level translator with 5-V support

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 3
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 2N7001T-Q1 Single-bit Dual-supply Buffered Voltage Signal Converter datasheet (Rev. A) PDF | HTML 2020/7/29
應用說明 Schematic Checklist - A Guide to Designing with Auto-Bidirectional Translators PDF | HTML 2024/7/12
應用說明 Understanding Transient Drive Strength vs. DC Drive Strength in Level-Shifters (Rev. A) PDF | HTML 2024/7/3

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

2N7001TEVM — 適用於單向轉換裝置的 2N7001T 評估模組

此 EVM 旨在支援單向轉換裝置 2N7001T。2N7001T 可在 1.8V 至 3.6V 範圍內運作，且具有高達 12mA 的驅動強度。
使用指南: PDF
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
開發板

5-8-LOGIC-EVM — 適用於 5 針腳至 8 針腳 DCK、DCT、DCU、DRL 和 DBV 封裝的通用邏輯評估模組

靈活的 EVM 旨在支援任何針腳數為 5 至 8 支且採用 DCK、DCT、DCU、DRL 或 DBV 封裝的裝置。
使用指南: PDF
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
模擬型號

2N7001T-Q1 IBIS Model

SCEM697.ZIP (42 KB) - IBIS 模型
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
SOT-SC70 (DCK) 5 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片