XTR200
- Mode pin for selectable current or voltage output
- Current output transfer function set by a single external resistor
- Voltage output mode has a fixed gain of 3.75V/V
- Integrated output transistor eliminates external components
- Capable of output voltages within 1mV of ground on a single supply
- Wide supply voltage range: 8V to 60V
- Wide specified temperature range: –40°C to +125°C
- Low input offset voltage: ±200µV
- Low input offset voltage drift: ±0.5µV/°C
- Excellent span error (current mode): 0.01%
- Excellent gain error (voltage mode): 0.007%
- Output error flag (EF)
- Output disable (OD)
- Extremely small 3mm × 2mm WSON package
The XTR200 is a high-voltage, precision, output driver for 3-wire current or voltage systems, designed for standard industrial signal levels such as 0mA to 20mA, 4mA to 20mA, and 0V to 10V. The mode pin configures the device for either current or voltage output and eliminates the need to change external components to switch between modes. In current-output mode, the ratio between input voltage and output current is set by a single resistor, RSET. In voltage-output mode, the XTR200 has a fixed gain of 3.75V/V which is set by integrated, high-precision, thin-film, resistors.
The device integrates a low-leakage PMOS output transistor and short-circuit current protection, further reducing the need for external components. An external PNP or PMOS transistor can be used with the XTR200 to reduce on-chip power dissipation. The on-chip short-circuit protection also protects external transistors from damaging overcurrent events.
The XTR200 error flag pin (EF) indicates several temperature or output fault conditions. The output disable pin (OD) places the output pin into a high-impedance state with very low leakage.
The XTR200 is available in a small 3mm × 2mm, 10-pin WSON surface-mount package.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | XTR200 Precision, 3-Wire, Current-and-Voltage Transmitter datasheet (Rev. A) | PDF | HTML | 2025. 9. 25 | |
| 아날로그 디자인 학술지 | 적응형 공급을 사용해 PLC 출력 전력 손 실을 반으로 줄이는 방법 | PDF | HTML | 2026. 4. 30 | ||
| Circuit design | Precision, Three-Wire High-Voltage Output Transmitter Using the DAC80501 and XTR200 | PDF | HTML | 2026. 1. 27 | ||
| Circuit design | Precision, Three-Wire, Analog Current Output Transmitter Using the DAC80501 and XTR200 | PDF | HTML | 2026. 1. 27 | ||
| Product overview | Simplify 4-20mA Current and Voltage Output 3-Wire Transmitters With XTR200 | PDF | HTML | 2025. 10. 13 | ||
| 애플리케이션 노트 | Using the XTR200 for M-CRPS Current Monitor Outputs | PDF | HTML | 2025. 10. 10 | ||
| 인증서 | XTR200EVM EU Declaration of Conformity (DoC) | 2025. 3. 11 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
XTR200EVM — XTR200 평가 모듈
XTR200 EVM(평가 모듈)은 3회선 전류 또는 전압 시스템을 위한 고전압, 정밀 출력 드라이버인 XTR200을 평가하기 위한 개발 플랫폼입니다. 이 장치는 0mA~20mA, 4mA~20mA, 0mA~25mA 및 0V~10V의 표준 산업용 신호 레벨을 위해 설계되었습니다.
TIDA-011026 — 필드 트랜스미터 플랫폼: 3선 4mA~20mA 인터페이스 레퍼런스 설계
이 레퍼런스 설계는 3선 전압 및 전류 인터페이스 센서를 위해 4~20mA 인터페이스를 구현하는 예시를 보여줍니다. 이 설계를 통해 전류 루프 보호기 TPS2661과 함께 XTR200을 평가할 수 있습니다. XTR200은 4~20mA, 0~20mA 및 0~10V와 같은 표준 산업용 신호 레벨을 사용하는 전압 및 전류 필드 트랜스미터 통신 인터페이스용 출력 구동 회로를 통합하고 있습니다. 이 레퍼런스 설계는 핀 헤더를 통해 출력 단계를 구동하는 PWM(펄스 폭 변조) 인터페이스에 액세스할 수 있도록 합니다. 이 핀 헤더는 연결된 (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| WSON (DQC) | 10 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.