WL1805MOD
- General
- Integrates RF, power amplifiers (PAs), clocks, RF switches, filters, passives, and power management
- Quick hardware design with TI module collateral and reference designs
- Operating temperature: –20°C to +70°C
- Small form factor: 13.3mm × 13.4mm × 2mm
- 100-pin MOC package
- FCC, IC, ETSI/CE, and TELEC certified with PCB, dipole, chip, and PIFA antennas
-
Wi-Fi
- WLAN baseband processor and RF transceiver support of IEEE Std 802.11b, 802.11g, and 802.11n
- 20MHz and 40MHz SISO and 20MHz 2 × 2 MIMO at 2.4GHz for high throughput: 80Mbps (TCP), 100Mbps (UDP)
- 2.4GHz MRC support for extended range
- Fully calibrated: Production calibration is not required
- 4-bit SDIO host interface support
- Wi-Fi direct concurrent operation (multichannel, multirole)
-
Bluetooth and Bluetooth Low Energy: WL183xMOD only
- Bluetooth 5.1 secure connection compliant and CSA2 support; declaration ID: D032799
- Host controller interface (HCI) transport for Bluetooth over UART
- Dedicated audio processor support of SBC encoding + A2DP
- Dual-mode Bluetooth and Bluetooth Low Energy
- TIs Bluetooth and Bluetooth Low Energy certified stack
- Key benefits
- Reduces design overhead
- Differentiated use cases by configuring WiLink™ 8 simultaneously in two roles (STA and AP) to connect directly with other Wi-Fi devices on different RF channel (Wi-Fi networks)
- Best-in-class Wi-Fi with high-performance audio and video streaming reference applications with up to 1.4× the range versus one antenna
- Different provisioning methods for in-home devices connectivity to Wi-Fi in one step
- Lowest Wi-Fi power consumption in connected idle (< 800µA)
- Configurable wake on WLAN filters to only wake up the system
- Wi-Fi and Bluetooth single antenna coexistence
The certified WiLink™ 8 module from TI offers a high throughput and extended range along with Wi-Fi® and Bluetooth® coexistence (WL1835MOD only) in a power-optimized design. The WL18x5MOD device is a 2.4GHz module, a two-antenna system. The device is FCC, IC, ETSI/CE, and TELEC certified for AP and client. TI offers drivers for high-level operating systems such as Linux and Android™. Additional drivers, such as WinCE and RTOS, which include QNX, Nucleus, ThreadX, and FreeRTOS, are supported through third parties.
기술 자료
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TMDSEVM437X — AM437x 평가 모듈
AM437x 평가 모듈(EVM) TMDXEVM437X는 개발자가 AM437x 프로세서 제품군((AM4372, AM4376, AM4377, AM4378)의 평가를 즉시 시작하고 HMI, 애플리케이션 구축을 개시하고, 산업용 및 네트워킹 애플리케이션 개발을 가속화할 수 있게 해줍니다. TMDSEVM437X 개발 플랫폼은 기가비트 이더넷, DDR3, 카메라 모듈 2개, 7" 정전식 터치 스크린 LCD와 같은 옵션이 결합되어 있는 Arm Cortex-A9 프로세서에 기반을 두고 있습니다.
TMDXEVM3358 — AM335x 평가 모듈
The AM335x Evaluation Module (EVM) enables developers to immediately start evaluating the AM335x processor family (AM3351, AM3352, AM3354, AM3356, AM3358) and begin building applications for factory automation, building automation, grid infrastructure, and more.
WL18XXCOM82SDMMC — WL18XXCOM82SDMMC
The WiLink SDIO board is a SDMMC adapter board and is an easy to use connector between a WiLink COM8 Evaluation module [WL1837MODCOM8i and WL1835MODCOM8B] and a generic SD/MMC card slot on a host processor EVM. The adapter card enables the WiLink Wi-Fi module to operate over SDIO. It also provides (...)
WL1835MODCOM8B — WiLink™ 8 모듈 2.4GHz Wi-Fi® + Bluetooth® COM8 평가 모듈
The WL1835MODCOM8 is one of the two evaluation boards for the TI WiLink 8 combo module family. For designs requiring performance in the 5 GHz band and extended temperature range, see the WL1837MODCOM8I.
The WL1835MODCOM8 Kit for Sitara EVMs easily enables customers to add (...)
WL1837MODCOM8I — WiLink™ 8 듀얼 밴드 2.4 및 5GHz Wi-Fi® + Bluetooth® COM8 평가 모듈
The WL1837MODCOM8I, which is compatible with many processors including TI’s (...)
PROCESSOR-SDK-AM335X — Linux 및 TI-RTOS 지원을 위한 AM335x Sitara 프로세서용 프로세서 SDK
Processor SDK (Software Development Kit) is a unified software platform for TI embedded processors providing easy setup and fast out-of-the-box access to benchmarks and demos. All releases of Processor SDK are consistent across TI’s broad portfolio, allowing developers to seamlessly (...)
WILINK-BT_WIFI-WIRELESS_TOOLS — WL18XX 모듈용 WiLink™ Wireless Tools
이 패키지에는 다음 애플리케이션이 포함되어 있습니다:
- WLAN RTTT(실시간 튜닝 툴)
- 블루투스® 로거
- WLAN gLogger
- LQM(링크 품질 모니터)
- HCITester 툴
- BTSout
- BTSTransform
- ScriptPad
이 애플리케이션은 호스트로 WiLink™ WLAN/Bluetooth/Bluetooth 저에너지 펌웨어를 디버깅 및 모니터링하고, RF 검증 테스트를 수행하고, 규정 인증 테스트를 위한 사전 테스트를 실행하고, 하드웨어 및 소프트웨어 플랫폼 통합 문제를 디버그하는 데 필요한 모든 기능을 제공합니다.
WLAN 및 (...)
WILINK-WIFI_MESH_VISUALIZATION_TOOL — WL18XX 모듈용 WiLink™ 메시 시각화 툴
WILINK8-WIFI-MCP8 — WiLink™ 8개의 독점 Wi-Fi 드라이버 – QNX, WinCE, Nucleus RTOS 기준
MCP 패키지에는 설치 패키지, 사전 컴파일된 개체 및 독점 Wi-Fi 드라이버의 소스(QNX, Nucleus, WinCE는 물론 ThreadX, FreeRTOS, µC, MQX ,RTX 및 uITRON RTOS 기준 이미지)가 포함되어 있어 TI WiLink Wi-Fi 드라이버를 쉽게 통합할 수 있습니다. 통합은 타사 공급업체를 통해 지원됩니다. 공급업체 링크는 다음과 같습니다.
시그마 패키지는 자동화된 시그마 인증 테스트를 지원하는 WL8 코드에 필요한 API를 제공합니다.
WAPI 패키지는 WAPI 보안 프로토콜 지원을 위한 (...)
WILINK8-WIFI-NLCP — WiLink8 NLCP Wi-Fi driver package for Linux OS
WiLink™ 8 NLCP 패키지는 WiLink™ 8 Linux 드라이버, 펌웨어 바이너리, WPA Supplicant, hostapd 등을 업데이트하는 빌드 스크립트로 구성됩니다. 자세한 내용은 릴리스 노트 및 사용 설명서를 참조하세요
소프트웨어 블록 개요:
WL18xx Linux 드라이버는 장치에서 Wi-Fi 기능을 실현하기 위한 인터페이스 드라이버와 함께 오픈 소스 구성 요소를 사용합니다. 아래에 몇 가지 NLCP 드라이버 패키지 구성 요소가 나열되어 있습니다:
- WiLink™ 8 FW: FW는 장치 하드웨어에서 실행되어 (...)
WL18XX-REPORTS — Reports: WL18XX Regulatory Certification Reports
WILINK-DESIGN-REVIEWS — WL18xx 장치에 대한 하드웨어 설계 검토
WiLink™ 하드웨어 설계 검토 프로세스 시작하기:
- 1단계: 검토를 요청하기 전에 기술 문서 및 설계, 해당 제품 페이지에서 사용 가능한 개발 리소스를 검토하는 것이 중요합니다(아래 WL18xx 제품 페이지 링크 참조).
- 2단계: 하드웨어 설계 검토 요청 양식을 다운로드해 작성합니다
- 3단계: 작성한 하드웨어 설계 검토 요청 양식과 필요한 문서를 함께 wilink-hw-review@list.ti.com으로 이메일로 보냅니다.
WiLink 하드웨어 설계 검토 프로세스는 설계를 검토하고 귀중한 피드백을 제공할 수 있는 주제 전문가와 (...)
TIDC-WL1835MODCOM8B — WiLink™ 1835 모듈의 2.4 및 WiFi® + Bluetooth® 인증 안테나 설계
The WiLink 1835 Module Antenna Design is a reference design that combines the functionalities of the WiLink 8 module with a built-in antenna on a single board, implementing the module in the way it's been certified. Through this, customers are able to evaluate the performance of the module through (...)
TIDC-WL1837MOD-AUDIO-MULTIROOM-CAPE — TI WiLink™ 8 Wi-Fi®/Bluetooth®/Bluetooth 저에너지 오디오 멀티룸 케이프 레퍼런스 디자인
The TI WiLink™ 8 WL1837MOD audio cape is a wireless multi-room audio reference design used with BeagleBone Black (featuring TI Sitara™ AM335x). The WiLink 8 device's WLAN capability to capture and register precise arrival time of the connected AP's beacon is used to achieve ultra-precise (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| QFM (MOC) | 100 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.