UCC28730-Q1
- AEC-Q100 Qualified for Automotive Applications:
- Device Temperature Grade 1: –40⁰C to +125⁰C
- Device HBM Classification Level 2: ±2 kV
- Device CDM Classification Level C4B: ±750 V
-
Functional Safety-Capable
- Documentation available to aid functional safety system design
- Enables Zero-Power (< 5 mW) Standby Consumption
- Primary-Side Regulation (PSR) Eliminates Opto-coupler
- ±5% Voltage Regulation and Current Regulation Across Line and Load
- 700-V Start-up Switch with 30-V Minimum Start-up Voltage
- 83-kHz Maximum Switching Frequency Enables Low Stand-by Power Charger Designs
- Resonant-Ring Valley-Switching Operation for Highest Overall Efficiency
- Frequency-Dither to Ease EMI Compliance
- Clamped Gate-Drive Output for MOSFET
- Over-Voltage, Low-Line, and Over-Current Protection Functions
- Programmable Cable Compensation
- SOIC-7 Package
The UCC28730-Q1 isolated-flyback power supply controller provides constant-voltage (CV) and constant-current (CC) output regulation without the use of an optical coupler. A minimum switching frequency of 30 Hz achieves less than 5 mW of no-load power.
This device processes information from the primary power switch and an auxiliary flyback winding for precise control of output voltage and current.
An internal 700-V start-up switch, dynamically- controlled operating states and a tailored modulation profile support ultra-low stand-by power without sacrificing start-up time or output transient response. Control algorithms in the UCC28730-Q1 allow operating efficiencies to meet or exceed applicable standards. Discontinuous conduction mode (DCM) operation with valley-switching reduces switching losses. Modulation of the switching frequency and primary current peak amplitude (FM and AM) keeps the conversion efficiency high across the entire load and line ranges.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | UCC28730-Q1 Zero-Power Standby PSR Flyback Controller for Automotive datasheet (Rev. B) | PDF | HTML | 2020. 11. 30 | |
| 백서 | Isolated Bias Power Supply Architecture for HEV and EV Traction Inverters | PDF | HTML | 2023. 10. 11 | ||
| Application brief | Designing a Robust Traction Inverter Redundant Power Supply From 800 V Battery (Rev. C) | PDF | HTML | 2023. 2. 16 | ||
| 기능 안전 정보 | UCC28730-Q1 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA | PDF | HTML | 2020. 8. 18 | ||
| 애플리케이션 노트 | Minimize Standby Consumption for UCC287XX Family | 2019. 8. 1 | |||
| 백서 | Driving the future of HEV/EV with high-voltage solutions (Rev. B) | 2018. 5. 16 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
UCC28730EVM-552 — UCC28730 UCC24650 2차측 웨이크업을 지원하는 1차측 플라이백 컨트롤러
UCC28730EVM-552 평가 모듈은 옵토커플러 없이 CV(정전압) 및 CC(정전류) 출력 조정을 제공하는 10W 오프라인 DCM(불연속 모드) 플라이백 컨버터입니다. 1차측 컨트롤러는 2차측 전압 강하 모니터 UCC24650에서 활성화 신호를 감지하여 대형 부하 단계에 대한 과도 응답을 개선합니다. 이 EVM은 UCC28730이 내장형 700V 시동 스위치, 동적으로 제어되는 작동 상태 및 맞춤형 변조 프로파일을 통해 시동 시간 또는 출력 과도 응답을 희생하지 않고 초저 대기 전력을 제공하는 방법을 보여줍니다.
TINA-TI — SPICE 기반 아날로그 시뮬레이션 프로그램
TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
SLUC579 — UCC28730 Design Calculator
PMP22288 — 오토모티브 인버터 전원을 위한 15W 플라이백 레퍼런스 설계
UCC28730-Q1 플라이백 컨트롤러를 사용해 절연 15V 출력을 생성하는 레퍼런스 설계입니다. 이 설계는 40V~250VDC 입력에서 0.33A, 250V~550VDC 입력에서 1A를 지원합니다. 이 전력 레퍼런스 설계는 인버터 바이어스 공급 애플리케이션에 적용 가능하며 차량용 인증을 받았습니다.
PMP22487 — BMS 애플리케이션을 위한 고전압 벅 컨버터 레퍼런스 설계
PMP22557 — 전자 모터사이클 BMS 애플리케이션용 고전압 벅 컨버터 레퍼런스 디자인
PMP23431 — 60V~1000V 입력, 삼중 출력 10W PSR 플라이백 레퍼런스 설계
PMP31248 — 230V AC 입력 12V 1차측 조정 플라이백 레퍼런스 설계
이 레퍼런스 설계는 UCC28730 PSR(1차측 조정) 컨트롤러 및 UCC24650(활성화 모니터)을 기반으로 하는 반공진 플라이백 전원 공급 장치입니다. PSR 토폴로지를 사용하면 옵토커플러의 필요성을 제거하고, 안정성을 높이고, 시스템 비용을 최적화할 수 있습니다. 이 설계는 230VAC에서 6mW 미만의 대기 전력과 25W 부하에서 85% 이상의 효율성을 달성합니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOIC (D) | 7 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.