UCC28600
- Green-Mode Controller With Advanced Energy
Saving Features - Quasi-Resonant Mode Operation for Reduced
EMI and Low Switching Losses (Low-Voltage
Valley Switching) - Low Standby Current for Minimum System No-
Load Power Consumption - Low Start-up Current: 25-µA Maximum
- Programmable Line and Load Over-Voltage
Protection - Internal Over-Temperature Protection
- Current Limit Protection
- Cycle-by-Cycle Power Limit
- Primary-Side Over-Current Hiccup Restart
Mode
- 1-A Sink, –0.75-A Source TrueDrive™ Gate Drive
Output - Programmable Soft-Start
- Green-Mode Status Pin (PFC Disable Function)
The UCC28600 is a PWM controller with advanced energy features to meet stringent world-wide energy efficiency requirements.
UCC28600 integrates built-in advanced energy saving features with high-level protection features to provide cost-effective solutions for energy-efficient power supplies. UCC28600 incorporates frequency fold-back and green-mode operation to reduce the switching losses at light-load and no-load conditions.
UCC28600 is available in the 8-pin SOIC package. Operating junction temperature range is –40°C to +105°C.
The UCC28600 Design Calculator, (SLVC104), located in the Tools and Software section of the UCC28600 product folder, provides a user-interactive iterative process for selecting recommended component values for an optimal design.
관심 가지실만한 유사 제품
비교 대상 장치보다 업그레이드된 기능을 지원하는 즉각적 대체품.
기술 자료
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
SLVC104 — UCC28600 Design Calculator
PMP10121 — 오프라인 AC/DC 77W 반공진 플라이백 컨버터 레퍼런스 디자인
The PMP10121 reference design uses the UCC28600 quasi-resonant flyback controller to generate 22V @ 3.5A from an AC input. This flyback converter is not isolated and no optocoupler is needed for regulation.
PMP10150 — 범용 AC 입력, 듀얼 12V, -8.5V 출력 반공진 플라이백 컨버터 레퍼런스 디자인
The PMP10150 reference design uses the UCC28600 quasi-resonant flyback controller to generate a 12V and a -8.5V output from an universal AC input. An optocoupler is used to regulate the 12V output.
PMP30094 — 3상 E 미터 반공진 플라이백 레퍼런스 설계
PMP40347 — 전자계량기를 위한 3상 AC 입력, 12W 출력 레퍼런스 설계
PMP40473 — 세탁기용 85~115Vac 입력, 절연 3출력 플라이백 레퍼런스 설계
TIDA-00127 — 보호 릴레이용 30W 초광역 전원 공급 장치 레퍼런스 디자인
이 보호 릴레이용 전원 공급 솔루션은 매우 넓은 범위의 AC(88-276V AC) 및 DC(24-250V DC) 입력을 모두 처리하므로 다양한 보호 릴레이에 전원을 공급하는 데 적합한 플랫폼입니다. 전원 공급 장치는 많은 보호 릴레이에 필요한 업계 표준 전압(예: +/-12V 및 절연형 6.75V)을 출력하도록 설계되었으며 탁월한 라인 및 부하 레귤레이션(<+/-3%)을 제공합니다. 이 솔루션은 높은 효율(최대 78%)로 고와트(30W)를 위해 설계되었으며 IEC61000-4(EFT 및 서지) 및 CISPR 11 Class A(간섭)에 대한 사전 준수 테스트를 거쳤습니다.
TIDA-00381 — 고압측 및 저압측 드라이버를 사용하는 360W 위상 변이 풀 브리지 공진 LLC 레퍼런스 디자인
The power supply employs Full Bridge Resonant LLC with phase shift operating at ramp up, light load, low output voltage. This operating mode can replace PWM operating mode in LLC, which can improve efficiency signficantly in light load.
TIDA-00412 — 360W 디지털 제어 위상 변이 풀 브리지 컨버터 레퍼런스 디자인
DC-DC power converter with digital control using UCD3138CC64EVM-030 daughter-card. The daughter-card with preloaded firmware providing the required control functions for a Phase Shift Full Bridge converter. The TIDA-00412 (UCD3138PSFBEVM-027) accepts a DC input from 370 to 400 VDC, and (...)
TIDA-00512 — 340W 디지털 제어 LLC 공진 하프 브리지 DC-DC 전력 변환 레퍼런스 디자인
This design is a LLC resonant half-bridge DC-DC power converter with digital control using 3138ACC32EVM-149 daughter-card. The daughter-card control functions with preloaded firmware providing the required control functions for a LLC resonant half-bridge converter. The TIDA-00512 (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOIC (D) | 8 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.