TXS0108E-Q1
- AEC-Q100 qualified for automotive applications:
- Device temperature grade 1: –40°C to 125°C
-
Device HBM ESD classification level 2
-
Device CDM ESD classification level C6
- No direction-control signal needed
- Maximum data rates:
- 110Mbps (push pull)
- 1.2Mbps (open drain)
- 1.4V to 3.6V on A port and 1.65V to 5.5V on B port (VCCA ≤ VCCB)
- No power-supply sequencing required – either VCCA or VCCB can be ramped first
- Latch-up performance exceeds 100mA per JESD 78, class II
- ESD protection exceeds JESD 22 (A port):
- 2000V Human Body Model (A114-B)
- 150V Machine Model (A115-A)
- 1000V Charged-Device Model (C101)
- IEC 61000-4-2 ESD (B-port):
- ± 8kV Contact Discharge
- ± 6kV Air Discharge
This device is an 8-bit non-inverting level translator which uses two separate configurable power-supply rails. The A port tracks the VCCA pin supply voltage. The VCCA pin accepts any supply voltage between 1.4V and 3.6V. The B port tracks the VCCB pin supply voltage. The VCCB pin accepts any supply voltage between 1.65V and 5.5V. Two input supply pins allows for low Voltage bidirectional translation between any of the 1.5V, 1.8V, 2.5V, 3.3V, and 5V voltage nodes.
When the output-enable (OE) input is low, all outputs are placed in the high-impedance (Hi-Z) state.
To put the device in the Hi-Z state during power-up or power-down periods, tie OE to GND through a pull-down resistor. The current-sourcing capability of the driver determines the minimum value of the resistor.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | TXS0108E-Q1 Automotive 8-Bit Bi-directional, Level-Shifting, Voltage Translator for Open-Drain and Push-Pull Applications datasheet (Rev. G) | PDF | HTML | 2024. 12. 2 | |
| 애플리케이션 노트 | Schematic Checklist - A Guide to Designing with Auto-Bidirectional Translators | PDF | HTML | 2024. 7. 12 | ||
| 애플리케이션 노트 | Understanding Transient Drive Strength vs. DC Drive Strength in Level-Shifters (Rev. A) | PDF | HTML | 2024. 7. 3 | ||
| Application brief | Integrated vs. Discrete Open Drain Level Translation | PDF | HTML | 2024. 1. 9 | ||
| 애플리케이션 노트 | Leveraging Edge Rate Accelerators with Auto-Sensing Level Shifters | PDF | HTML | 2023. 9. 29 | ||
| 애플리케이션 노트 | Do’s and Don’ts for TXB and TXS Voltage Level-Shifters with Edge Rate Accelerato | PDF | HTML | 2023. 6. 28 | ||
| 선택 가이드 | Voltage Translation Buying Guide (Rev. A) | 2021. 4. 15 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
14-24-LOGIC-EVM — 14핀~24핀 D, DB, DGV, DW, DYY, NS 및 PW 패키지용 로직 제품 일반 평가 모듈
14-24-LOGIC-EVM 평가 모듈(EVM)은 14핀~24핀 D, DW, DB, NS, PW, DYY 또는 DGV 패키지에 있는 모든 로직 장치를 지원하도록 설계되었습니다.
14-24-NL-LOGIC-EVM — 14핀~24핀 비 리드 패키지용 로직 제품 일반 평가 모듈
14-24-NL-LOGIC-EVM은 14핀~24핀 BQA, BQB, RGY, RSV, RJW 또는 RHL 패키지가 있는 로직 또는 변환 장치를 지원하도록 설계된 유연한 평가 모듈(EVM)입니다.
TXS-EVM — 싱글, 듀얼, 쿼드 및 옥탈 채널 장치용 변환기 제품군 평가 모듈
TXS-EVM은 단일, 듀얼, 쿼드 및 옥탈 채널 TXS 장치를 지원하도록 설계되었습니다. TXS 장치는 1.2V~5.5V 사이의 작동 전압을 가진 자동 양방향 전압 레벨 변환 제품군에 속하며, 여러 섹터에 걸쳐 다양한 일반 전압 레벨 변환 애플리케이션을 지원하도록 설계되었습니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| TSSOP (PW) | 20 | Ultra Librarian |
| VQFN (RKS) | 20 | Ultra Librarian |
| VSSOP (DGS) | 20 | Ultra Librarian |