TXS0101

활성

오픈 드레인 및 푸시-풀 애플리케이션을 위한 1비트 양방향 전압 레벨 시프터

지금 주문하기

데이터 시트

document-pdfAcrobat TXS0101 1-Bit Bidirectional Level-Shifting, Voltage-Level Translator With Auto-Direction-Sensing for Open-Drain and Push-Pull Applications datasheet (Rev. F) (영어) PDF | HTML

TXS0101

활성

지금 주문하기

제품 상세 정보

Bits (#)

1

Data rate (max) (Mbps)

50

Topology

Open drain, Push-Pull

Direction control (typ)

Auto-direction

Vin (min) (V)

1.2

Vin (max) (V)

3.6

Vout (min) (V)

1.65

Vout (max) (V)

5.5

Applications

GPIO

Features

Edge rate accelerator, Output enable, Partial power down (Ioff), Vcc isolation

Prop delay (ns)

165

Technology family

TXS

Supply current (max) (mA)

0.025

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Bits (#)

1

Data rate (max) (Mbps)

50

Topology

Open drain, Push-Pull

Direction control (typ)

Auto-direction

Vin (min) (V)

1.2

Vin (max) (V)

3.6

Vout (min) (V)

1.65

Vout (max) (V)

5.5

Applications

GPIO

Features

Edge rate accelerator, Output enable, Partial power down (Ioff), Vcc isolation

Prop delay (ns)

165

Technology family

TXS

Supply current (max) (mA)

0.025

Rating

Catalog

Operating temperature range (°C)

-40 to 85

USON (DRY)

6

1.45 mm² (1.45 mm × 1 mm)

SOT-SC70 (DCK)

6

4.2 mm² (2 mm × 2.1 mm)

SOT-23 (DBV)

6

8.12 mm² (2.9 mm × 2.8 mm)

SOT-5X3 (DRL)

6

2.56 mm² (1.6 mm × 1.6 mm)

DSBGA (YZP)

6

2.1875 mm² (— mm × — mm)

Latch-up performance exceeds 100mA per JESD 78, class II
ESD protection exceeds JESD 22:
- A Port:
  - 2500V Human-Body Model (A114-B)
  - 200V Machine Model (A115-A)
  - 1500V Charged-Device Model (C101)
- B port:
  - 8kV Human-Body Model (A114-B)
  - 200V Machine Model (A115-A)
  - 1500V Charged-Device Model (C101)
No direction-control signal needed
Maximum data rates:
- 24Mbps (push pull)
- 2Mbps (open drain)
Available in the Texas Instruments NanoFree™ package
1.65V to 3.6V on A port and 2.3V to 5.5V on B port ( VCCA ≤ VCCB)
VCC isolation feature – if either VCC input is at GND, both ports are in the high-impedance state
No power-supply sequencing required – either VCCA or VCCB can be ramped first
Ioff supports partial-power-down mode operation

Latch-up performance exceeds 100mA per JESD 78, class II
ESD protection exceeds JESD 22:
- A Port:
  - 2500V Human-Body Model (A114-B)
  - 200V Machine Model (A115-A)
  - 1500V Charged-Device Model (C101)
- B port:
  - 8kV Human-Body Model (A114-B)
  - 200V Machine Model (A115-A)
  - 1500V Charged-Device Model (C101)
No direction-control signal needed
Maximum data rates:
- 24Mbps (push pull)
- 2Mbps (open drain)
Available in the Texas Instruments NanoFree™ package
1.65V to 3.6V on A port and 2.3V to 5.5V on B port ( VCCA ≤ VCCB)
VCC isolation feature – if either VCC input is at GND, both ports are in the high-impedance state
No power-supply sequencing required – either VCCA or VCCB can be ramped first
Ioff supports partial-power-down mode operation

This one-bit non-inverting translator uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.65V to 3.6V. VCCA must be less than or equal to VCCB . The B port is designed to track VCCB. VCCB accepts any supply voltage from 2.3V to 5.5V. This allows for low voltage bidirectional translation between any of the 1.8V, 2.5V, 3.3V, and 5V voltage nodes.

When the output-enable (OE) input is low, all outputs are placed in the high-impedance state.

To put the device in the high-impedance state during power up or power down, tie OE to GND through a pull-down resistor; the current-sourcing capability of the driver determines the minimum value of the resistor.

This one-bit non-inverting translator uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.65V to 3.6V. VCCA must be less than or equal to VCCB . The B port is designed to track VCCB. VCCB accepts any supply voltage from 2.3V to 5.5V. This allows for low voltage bidirectional translation between any of the 1.8V, 2.5V, 3.3V, and 5V voltage nodes.

When the output-enable (OE) input is low, all outputs are placed in the high-impedance state.

To put the device in the high-impedance state during power up or power down, tie OE to GND through a pull-down resistor; the current-sourcing capability of the driver determines the minimum value of the resistor.

filter

기타 전압 변환기 찾기

다운로드 스크립트와 함께 비디오 보기 비디오

기술 자료

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.

11개 모두 보기

상위 문서	유형	직함	형식 옵션
*	데이터 시트	TXS0101 1-Bit Bidirectional Level-Shifting, Voltage-Level Translator With Auto-Direction-Sensing for Open-Drain and Push-Pull Applications datasheet (Rev. F)	PDF \| HTML	2025. 9. 4
	애플리케이션 노트	Schematic Checklist - A Guide to Designing with Auto-Bidirectional Translators	PDF \| HTML	2024. 7. 12
	애플리케이션 노트	Understanding Transient Drive Strength vs. DC Drive Strength in Level-Shifters (Rev. A)	PDF \| HTML	2024. 7. 3
	Application brief	Integrated vs. Discrete Open Drain Level Translation	PDF \| HTML	2024. 1. 9
	애플리케이션 노트	Leveraging Edge Rate Accelerators with Auto-Sensing Level Shifters	PDF \| HTML	2023. 9. 29
	애플리케이션 노트	Do’s and Don’ts for TXB and TXS Voltage Level-Shifters with Edge Rate Accelerato	PDF \| HTML	2023. 6. 28
	선택 가이드	Voltage Translation Buying Guide (Rev. A)		2021. 4. 15
	애플리케이션 노트	Effects of pullup and pulldown resistors on TXS and TXB devices (Rev. A)		2018. 3. 28
	애플리케이션 노트	Factors Affecting VOL for TXS and LSF Auto-bidirectional Translation Devices		2017. 11. 19
	애플리케이션 노트	Biasing Requirements for TXS, TXB, and LSF Auto-Bidirectional Translators		2017. 10. 30
	애플리케이션 노트	A Guide to Voltage Translation With TXS-Type Translators		2010. 6. 29

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

5-8-LOGIC-EVM — 5핀~8핀 DCK, DCT, DCU, DRL 및 DBV 패키지용 일반 논리 평가 모듈

5~8핀 수의 DCK, DCT, DCU, DRL 또는 DBV 패키지가 있는 모든 디바이스를 지원하도록 설계된 유연한 EVM.

사용 설명서: PDF

지원되는 제품 및 하드웨어

재고 있음

제한:

주문하려면 로그인

lock

재고를 보려면 로그인

??asset.out-of-stock-ti_ko_KR??

이용할 수 없음

평가 보드

TXS-EVM — 싱글, 듀얼, 쿼드 및 옥탈 채널 장치용 변환기 제품군 평가 모듈

TXS-EVM은 단일, 듀얼, 쿼드 및 옥탈 채널 TXS 장치를 지원하도록 설계되었습니다. TXS 장치는 1.2V~5.5V 사이의 작동 전압을 가진 자동 양방향 전압 레벨 변환 제품군에 속하며, 여러 섹터에 걸쳐 다양한 일반 전압 레벨 변환 애플리케이션을 지원하도록 설계되었습니다.

사용 설명서: PDF | HTML