TXE8124-Q1
- AEC-Q100
qualified for automotive applications:
- Temperature grade 1: –40°C to +125°C, TA
- Functional safety-capable
- Operating supply voltage range of 1.65V to 5.5V
- Low standby current consumption of 2.3µA typical
- SPI SCLK Frequency
- 10MHz from 3.3V to 5.5V
- 5MHz from 1.65V to 5.5V
- SPI daisy-chain supported
- SPI read and write with burst mode
- Multi-port SPI command to configure multiple ports simultaneously
- IOFF supported input port pins
- Active-low reset input (RESET)
- Open-drain active-low interrupt output
(INT)
- Interrupt mask and status per I/O
- Interrupt status per port
- Built-in fail-safe I/O feature
- Individual I/O configuration for
- Input and Output function
- Polarity inversion
- Output push-pull and open-drain selection
- Integrated pull-up or pull-down selection
- Bus-hold feature to maintain last I/O state
- Glitch filter enable selection
- Wettable flank VQFN package
- Latched outputs with 10mA drive capability for directly driving LEDs
- Latch-up performance exceeds 100mA per AEC Q100-004
- ESD protection
exceeds AEC - Q100 requirements
- 2000V Human-body model (AEC - Q100-002)
- 1000V Charged-device model (AEC - Q100-011)
The TXE8124-Q1 devices provide general purpose parallel input/output (I/O) expansion for the four wire Serial Peripheral Interface (SPI) protocol and is designed for 1.65V to 5.5V VCC operation. The TXE8124-Q1 supports both standard point-to-point communication along with daisy-chaining of multiple devices.
The device supports 10MHz from 3.3V to 5.5V and 5MHz from 1.65V to 5.5V. I/O expanders, such as the TXE8124-Q1, are designed for when additional I/Os are needed for switches, sensors, push-buttons, LEDs, and fans.
The TXE8124-Q1 devices has 3 I/O ports of 8 IOs each, which include additional features designed to enhance the I/O performance in terms of speed, power consumption, and flexibility. These include per I/O programmable open-drain or push-pull outputs, programmable pull-up and pull-down resistors, bus-hold latchable inputs, maskable interrupt, interrupt status register, glitch filter and a fail-safe register mode which is enabled by the FAIL-SAFE pin.
관심 가지실만한 유사 제품
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | TXE8124-Q1 Automotive 24-Bit SPI Bus I/O Expander with Interrupt Output, Reset Input, and I/O Configuration Registers datasheet (Rev. B) | PDF | HTML | 2026. 7. 31 | |
| 애플리케이션 노트 | Application of TXE81XX SPI to GPIO Expander Fail-Safe Feature | PDF | HTML | 2026. 6. 12 | ||
| 애플리케이션 노트 | How to Use SPI Daisy Chaining with TXE81XX Devices (Rev. A) | PDF | HTML | 2026. 5. 8 | ||
| 기능 안전 정보 | TXE8124-Q1 Functional Safety FIT Rate, FMD and Pin FMA | PDF | HTML | 2026. 4. 16 | ||
| 애플리케이션 노트 | Scalable SPI GPIO Expansion for Automotive ECU Design | PDF | HTML | 2026. 3. 19 | ||
| Application brief | Understanding the SPI Bus | PDF | HTML | 2025. 8. 22 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
IO-EXP-ADAPTER-EVM — IO 확장기 어댑터 평가 모듈
TXE81XXEVM — TXE81XX 평가 모듈
TXE81XXEVM을 사용하면 SPI I/O 확장기 TXE81XX 제품군을 평가할 수 있습니다. 이 EVM은 리드 패키지 유형 DGS(24 및 32) 및 DGG(56)에서 TXE8116, TXE8124 및 TXE8148(각각 16비트, 24비트 및 48비트)을 지원합니다. 이 EVM은 각 확장기에서 제공하는 많은 I/O를 함께 사용할 수 있는 여러 테스트 포인트 및 헤더에 대한 액세스를 제공합니다. 션트 연결을 쉽게 할 수 있는 수 헤더와 암 헤더 유형이 혼합되어 있습니다.
TIDA-020094 — 48V 영역 레퍼런스 설계
이 레퍼런스 설계에서는 고급 차량용 48V 저전압 레일 아키텍처의 동향을 보여줍니다. 이 설계에는 48V 백본 아키텍처 및 48V-12V 전력 변환 기능이 포함되어 있습니다. 이 레퍼런스 설계에서는 주요 제품에서 사용할 수 있는 48V 부하 드라이버를 보여줍니다. 이러한 제품으로는 HSS(고압측 스위치) 및 HSSC(고압측 스위치 컨트롤러), 스마트 eFuse 및 MD(모터 드라이버)가 있습니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VSSOP (DGS) | 32 | Ultra Librarian |
| VQFN (RHB) | 32 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.