TUSB9261
- Universal Serial Bus (USB)
- SuperSpeed USB 3.0 Compliant – TID
340730020- Integrated Transceiver Supports SS/HS/FS
Signaling
- Integrated Transceiver Supports SS/HS/FS
- Best-in-Class Adaptive Equalizer
- Allows for Greater Jitter Tolerance in the
Receiver
- Allows for Greater Jitter Tolerance in the
- USB Class Support
- USB Attached SCSI Protocol (UASP)
- USB Mass Storage Class Bulk-Only
Transport (BOT) - Support for Error Conditions Per the 13
Cases (Defined in the BOT Specification) - USB Bootability Support
- USB Human Interface Device (HID)
- Supports Firmware Update Via USB, Using a
TI Provided Application
- SuperSpeed USB 3.0 Compliant – TID
- SATA Interface
- Serial ATA Specification Revision 2.6
- Gen1i, Gen1m, Gen2i, and Gen2m
- Support for Mass-Storage Devices Compatible
With the ATA/ATAPI-8 Specification
- Serial ATA Specification Revision 2.6
- Integrated ARM Cortex M3 Core
- Customizable Application Code Loaded from
EEPROM by SPI Interface - Two Additional SPI Port Chip Selects for
Peripheral Connection - Up to 12 GPIOs for End-User Configuration
- Two GPIOs have PWM Functionality for
LED Blink Speed Control
- Two GPIOs have PWM Functionality for
- Serial Communications Interface for Debug
(UART)
- Customizable Application Code Loaded from
- General Features
- Integrated Spread Spectrum Clock Generation
Enables Operation from a Single Low-Cost
Crystal or Clock Oscillator- Supports 40 MHz
- A JTAG Interface is Used for IEEE1149.1 and
IEEE1149.6 Boundary Scan - Available in a Fully RoHS-Compliant Package
- Integrated Spread Spectrum Clock Generation
The TUSB9261 is an ARM® Cortex® M3 microcontroller based USB 3.0 to serial ATA bridge. It provides the necessary hardware and firmware to implement a USB attached SCSI protocol (UASP)-compliant mass storage device suitable for bridging hard disk drives (HDD), solid state disk drives (SSD), optical drives, and other compatible SATA 1.5-Gbps or SATA 3.0-Gbps devices to a USB 3.0 bus. In addition to UASP support, the firmware implements the mass storage class BOT and USB HID interfaces.
추가 정보 요청
TUSB9261 소스 코드를 지금 사용할 수 있습니다. 지금 요청
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | TUSB9261 USB 3.0 to SATA Bridge datasheet (Rev. I) | PDF | HTML | 2016. 3. 3 | |
| * | 정오표 | TUSB9261 Errata (Rev. B) | 2012. 12. 20 | ||
| 기술 문서 | 6 key questions when designing for USB protocol interfaces | PDF | HTML | 2020. 7. 31 | ||
| 애플리케이션 노트 | TUSB9261 Implementation Guide (Rev. E) | 2014. 12. 9 | |||
| 사용 설명서 | TUSB9261 DEMO User's Guide (Rev. A) | 2014. 12. 9 | |||
| 사용 설명서 | TUSB9260 Flash Burner - User Guide (Rev. D) | 2013. 10. 24 | |||
| 사용 설명서 | TUSB926x SpeedBoost Monitor User's Guide | 2010. 9. 23 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TUSB9261DEMO — TUSB9261 데모 및 레퍼런스 디자인
The TUSB9261DEMO board is a bridge between a SuperSpeed USB (USB 3.0) bus and a Serial–ATA (SATA) development kit. The TUSB9261DEMO is used to evaluate system compatibility. It provides a TUSB9261 hardware for connection to a SATA device such as a solid state drive, hard disk drive, DVD (...)
TIDA-00882 — USB 사용 USB Type-C HDD 전원 공급 레퍼런스 디자인
This reference design uses Texas Instrument's SuperSpeed USB 3.0 to SATA bridge, USB Type-CTM and USB PD controller with integrated power switch and High-Speed USB mux, and SuperSpeed USB 3.1 mux to demonstrate the subsystems required to implement a Type-C external hard disk drive capable of (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| HTQFP (PVP) | 64 | Ultra Librarian |