TUSB212
- Compatible with USB 2.0, OTG 2.0 and BC 1.2
- Pin strap or I2C configurable
- Support for LS, FS, HS signaling
- Ultra-low USB Disconnect and Shutdown Power Consumption
- Selectable Signal Gain Via Daisy Chain Device for High Loss Applications
- D1P/M and D2P/M Interchangeable and Host/Device Agnostic
- Supports up to 5m pre-channel or 2m post-channel Cable
Length
- Four Selectable AC Boost Settings Via External Pulldown Resistor
- DC Boost Along With AC Boost for Best Signal Integrity
The TUSB212 is a USB High-Speed (HS) signal conditioner, designed to compensate for ISI signal loss in a transmission channel.
TUSB212 has a patent-pending design which is agnostic to USB Low Speed (LS) and Full Speed (FS) signals. LS and FS signal characteristics are unaffected by the TUSB212 while HS signals are compensated.
Programmable signal AC boost and DC boost permits fine tuning device performance to optimize High Speed signals at the connector. This helps to pass USB High Speed electrical compliance tests.
In addition, TUSB212 is compatible with the USB On-The-Go (OTG) and Battery Charging (BC) protocols.
기술 자료
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
13개 모두 보기
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | TUSB212 USB 2.0 High Speed Signal Conditioner datasheet (Rev. A) | PDF | HTML | 2017. 8. 31 | |
| 애플리케이션 노트 | High-Speed Layout Guidelines for Signal Conditioners and USB Hubs (Rev. A) | PDF | HTML | 2026. 1. 8 | ||
| 애플리케이션 노트 | Solving Signal Integrity Challenges with USB2 Redrivers (Rev. A) | PDF | HTML | 2024. 8. 26 | ||
| 애플리케이션 노트 | TUSB21xx High-Speed Signal Quality Test Modes | PDF | HTML | 2022. 8. 8 | ||
| 사용 설명서 | TUSB211 to TUSB216I Transition Guide | PDF | HTML | 2021. 5. 25 | ||
| 애플리케이션 노트 | TUSB2XX implementation guide | 2018. 5. 29 | |||
| 애플리케이션 노트 | TUSB212 Schematic Checklist | 2018. 4. 16 | |||
| 기술 문서 | How to select the right USB Type-C™ signal switches | PDF | HTML | 2018. 3. 20 | ||
| 애플리케이션 노트 | TUSB211 to TUSB212 Changes | 2017. 9. 18 | |||
| 백서 | Strengthening the USB Type-C signal chain through redrivers | 2017. 8. 21 | |||
| 사용 설명서 | TUSB212 Evaluation Module | 2017. 8. 8 | |||
| 기술 문서 | How to deliver clean USB Type-C™ signals | PDF | HTML | 2017. 8. 7 | ||
| 기술 문서 | How USB will enable the future of automotive infotainment | PDF | HTML | 2015. 10. 8 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
평가 보드
TUSB1044RNQEVM — 최대 10G의 USB Type-C 대체 모드 리드라이버 평가 모듈
TUSB1044는 최대 10Gbps의 데이터 전송률을 지원하는 USB Type-C 대체 모드 리드라이버 스위치입니다. 프로토콜에 구애받지 않는 이 선형 리드라이버는 DisplayPort를 포함한 USB Type-C 대체 모드 인터페이스를 지원할 수 있습니다.
재고 있음
제한:
??asset.out-of-stock-ti_ko_KR??
이용할 수 없음
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| X2QFN (RWB) | 12 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.