TSER9615

활성

고속 센서용 7.55Gbps MIPI® CSI-2 V³Link™ 시리얼라이저

지금 주문하기

데이터 시트

document-pdfAcrobat TSER9615 V3LinkTM7.55 GbpsSerializer MIPI CSI-2 Interface for High-Speed, High-Resolution Cameras, RADAR, and Other Sensors datasheet (Rev. A) (영어) PDF | HTML

TSER9615

활성

데이터 시트

지금 주문하기

제품 상세 정보

Applications

Camera SerDes

Color depth (bpp)

24

Function

Serializer

Input compatibility

MIPI CSI-2

Output compatibility

V3Link

Features

Bidirectional, CRC, Coax or STP, Flexible GPIOs, I2C Config, Pattern Generation, Temperature sensing

Signal conditioning

DC Balance

EMI reduction

LVDS

Diagnostics

BIST

Rating

Catalog

Operating temperature range (°C)

-20 to 85

Applications

Camera SerDes

Color depth (bpp)

24

Function

Serializer

Input compatibility

MIPI CSI-2

Output compatibility

V3Link

Features

Bidirectional, CRC, Coax or STP, Flexible GPIOs, I2C Config, Pattern Generation, Temperature sensing

Signal conditioning

DC Balance

EMI reduction

LVDS

Diagnostics

BIST

Rating

Catalog

Operating temperature range (°C)

-20 to 85

VQFN (RHB)

32

25 mm² (5 mm × 5 mm)

7.55 Gbps (6 Gbps video payload) serializer supports high-speed sensors including 8 MP+ imagers
Supports 3 data rates: 7.55 Gbps, 3.775 Gbps and 1.8875 Gbps.
Power-over-Coax (PoC) compatible transceiver
Single MIPI D-PHY port with 4 lanes
- Compliant to MIPI D-PHY v2.1
- 1 Clock lane and 1, 2 or 4 configurable data lanes
- Up to 1.5 Gbps/lane
- Supports polarity pin inversion (p/n)
- Up to 16 virtual channels
Single port MIPI CSI-2 receiver
- Compliant to MIPI CSI-2 v2.1
- Supports multiple data types and multi-exposure
Advanced data protection and diagnostics including CRC data protection, sensor data integrity check, I 2C write protection, voltage and temperature measurement, programmable alarm and line fault detection
Flexible programmable output clock generator
Supports single-ended coaxial cable and shielded-twisted-pair (STP) cable
Ultra-low latency bidirectional I2C and GPIO control channel enables ISP control from ECU
Single 1.8 V power supply
Compatible with all V 3Link Vision / Enhanced Vision deserializers
Pin-to-pin compatible with the TSER953 serializer

7.55 Gbps (6 Gbps video payload) serializer supports high-speed sensors including 8 MP+ imagers
Supports 3 data rates: 7.55 Gbps, 3.775 Gbps and 1.8875 Gbps.
Power-over-Coax (PoC) compatible transceiver
Single MIPI D-PHY port with 4 lanes
- Compliant to MIPI D-PHY v2.1
- 1 Clock lane and 1, 2 or 4 configurable data lanes
- Up to 1.5 Gbps/lane
- Supports polarity pin inversion (p/n)
- Up to 16 virtual channels
Single port MIPI CSI-2 receiver
- Compliant to MIPI CSI-2 v2.1
- Supports multiple data types and multi-exposure
Advanced data protection and diagnostics including CRC data protection, sensor data integrity check, I 2C write protection, voltage and temperature measurement, programmable alarm and line fault detection
Flexible programmable output clock generator
Supports single-ended coaxial cable and shielded-twisted-pair (STP) cable
Ultra-low latency bidirectional I2C and GPIO control channel enables ISP control from ECU
Single 1.8 V power supply
Compatible with all V 3Link Vision / Enhanced Vision deserializers
Pin-to-pin compatible with the TSER953 serializer

The TSER9615 serializer is part of TI’s V 3Link Enhanced Vision family and is designed to support ultra-high-speed data sensors including 8MP+ Imagers, satellite RADAR, LIDAR, and time-of-flight (ToF) sensors. The serializer delivers an 7.55 Gbps forward channel and an ultra-low latency, 47.1875 Mbps bidirectional control channel and supports power over a single coax (PoC) or STP cable. When the TSER9615 is used in Enhanced Vision mode, it provides the possibility to select between three data rates: 7.55 Gbps, 3.775 Gbps and 1.8875 Gbps. The TSER9615 features advanced data protection and diagnostic features. Together with a companion deserializer, the TSER9615 delivers precise multi-camera sensor clock and sensor synchronization.

The TSER9615 is qualified with a wide temperature range of –20°C to 85°C. The serializer comes in a small 5 mm × 5 mm VQFN package for space-constrained sensor applications.

The TSER9615 serializer is part of TI’s V 3Link Enhanced Vision family and is designed to support ultra-high-speed data sensors including 8MP+ Imagers, satellite RADAR, LIDAR, and time-of-flight (ToF) sensors. The serializer delivers an 7.55 Gbps forward channel and an ultra-low latency, 47.1875 Mbps bidirectional control channel and supports power over a single coax (PoC) or STP cable. When the TSER9615 is used in Enhanced Vision mode, it provides the possibility to select between three data rates: 7.55 Gbps, 3.775 Gbps and 1.8875 Gbps. The TSER9615 features advanced data protection and diagnostic features. Together with a companion deserializer, the TSER9615 delivers precise multi-camera sensor clock and sensor synchronization.

The TSER9615 is qualified with a wide temperature range of –20°C to 85°C. The serializer comes in a small 5 mm × 5 mm VQFN package for space-constrained sensor applications.

filter

기타 V3Link 시리얼라이저/디시리얼라이저 찾기

다운로드 스크립트와 함께 비디오 보기 비디오

추가 정보 요청

전체 데이터시트 및 추가 리소스가 제공됩니다. 지금 요청

기술 자료

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.

1개 모두 보기

상위 문서	유형	직함	형식 옵션	최신 영어 버전 다운로드	날짜
*	데이터 시트	TSER9615 V3LinkTM7.55 GbpsSerializer MIPI CSI-2 Interface for High-Speed, High-Resolution Cameras, RADAR, and Other Sensors datasheet (Rev. A)	PDF \| HTML		2023. 11. 16

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

DS90UB971-Q1EVM — DS90UB971-Q1 평가 모듈

DS90UB971-Q1 평가 모듈(EVM)은 DS90UB971-Q1 FPD-Link IV 시리얼라이저를 평가하기 위한 기능 보드 설계입니다. DS90UB971-Q1 시리얼라이저는 FPD-Link IV 시리얼라이저를 나타내며 8MP+ 이미저, 위성 레이더, LIDAR 및 ToF(Time of Flight) 센서를 포함한 초고속 센서를 지원하도록 설계되었습니다. 이 칩은 8.4Gbps 순방향 채널 및 초저 지연 시간 52.5Mbps 양방향 제어 채널을 제공하며 단일 동축(PoC)을 통해 전원을 지원합니다. DS90UB971-Q1은 (...)

지원되는 제품 및 하드웨어

요청

애플리케이션 소프트웨어 및 프레임워크

ALP — Analog LaunchPad Framework Utility

To get started with Analog LaunchPad (ALP) software: Download and install the ALP Framework Utility. Add new device profiles and example scripts with the ALP-PROFILE-UPDATE tool.

지원되는 제품 및 하드웨어

다운로드 옵션

지원 소프트웨어

ALP-PROFILE-UPDATE — Analog LaunchPad Profile Update Software

ALP Profile Update contains latest fixes and updates to ALP profiles. If you are installing for the first time please install ALP Profile Update after installing ALP Framework.

지원되는 제품 및 하드웨어

다운로드 옵션

시뮬레이션 모델