TS3A226AE
- Ground FET Switches (60mΩ typical)
- Autonomous Detection of Headset Types:
3-Poles or 4-Poles (with MIC on SLEEVE or RING2) - Microphone Line Switches
- Supports FM Signal Transmission Through the Ground FETs
- Reduction of Click/Pop Noise
- VDD Range: 2.6 V – 4.7 V
- THD (Mic): 0.002% Typical
- Low Current Consumption: 6.5-µA Typical
- ±8kV Contract Discharge (IEC 61000-4-2) ESD Performance on SLEEVE and RING2 Pins
The TS3A226AE is an audio headset switch that detects 3- or 4-pole 3.5mm accessories. For a 4-pole accessory with a microphone, the TS3A226AE also detects the MIC location and routes the microphone and ground signals automatically. The ground signal is routed through a pair of low-impedance ground FETs (60mΩ typical), resulting minimal impact on audio cross-talk performance. The autonomous detection feature allows end users to plug in accessories with different audio pole configurations into the mobile device and have them operate properly with no added software control and complexity. The ground FETs of the device are designed to allow FM signal pass-through, making it possible to use the ground line of the headset as an FM antenna in mobile audio application.
The TS3A226AE is packaged within a 1.2mm × 1.2mm WCSP package, making it suitable for use in mobile application.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 | |
|---|---|---|---|---|---|---|
| * | 데이터 시트 | AUTONOMOUS AUDIO HEADSET SWITCH, TS3A226AE datasheet (Rev. A) | 2013. 7. 24 | |||
| 기술 문서 | USB Type-C™ power: Should your next device have USB Type-C? | PDF | HTML | 2017. 2. 14 | |||
| 기술 문서 | USB Type-C audio: Do I need to buy a new pair of headphones? | PDF | HTML | 2016. 7. 7 | |||
| 애플리케이션 노트 | Support Selfie Sticks Using a TS3A227E Audio Jack Switch | 2016. 3. 4 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TS3A226AEEVM — TS3A226AE 자율 오디오 헤드셋 스위치용 평가 모듈
TS3A226AEEVM은 TI(텍사스 인스트루먼트) 자율 오디오 헤드셋 스위치용 평가 모듈(EVM)입니다. 이 EVM은 TS3A226AE 장치용 기본 기능 평가를 제공하며 MICP, TIP 및 RING1에 대한 코덱 신호 연결을 위한 주변 기기 커넥터를 제공합니다.
TS3A226AE는 오디오 헤드셋 스위치 장치입니다. 이 장치는 아날로그 마이크가 있는지 감지하고 오디오 스테레오 잭의 여러 커넥터 사이에서 시스템 아날로그 마이크 핀을 전환합니다. 스테레오 커넥터의 마이크 연결부는 제조업체에 따라 접지 연결부로 바꿀 수 있습니다. (...)
TIDA-00006 — 3폴 또는 4폴 3.5mm 액세서리를 탐지하는 헤드셋 탐지 스위치
This reference design is for autonomous audio headset switch applications. Some audio headsets have integrated analog microphones. The GND and MIC connections on the audio jack connector may be swapped depending on the manufacturer. This design has the ability to detect the presence of an analog (...)
TIDA-03030 — 오디오 액세서리를 지원하는 USB Type-C™ 전원 경로 보호 레퍼런스 설계
TIDA-03030 레퍼런스 설계는 USB Type-C™ 애플리케이션의 전원 경로에 대한 강력한 보호 솔루션을 제공합니다. 이 설계는 TPS25923(eFuse) 및 CSD17571Q2(역방향 차단 FET)를 활용하여 과전압, 과전류, 핫 플러그 및 역전류 이벤트로부터 전원 경로를 보호합니다. 시스템 솔루션은 다운스트림 방향 포트(DFP)를 에뮬레이트하며 업스트림 방향 포트(UFP)장치의 연결을 감지할 수 있습니다. TIDA-03030 레퍼런스 설계는 USB Type-C 오디오 액세서리를 위한 아날로그 오디오도 지원합니다. (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| DSBGA (YFF) | 9 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.