TRS3318E
- ESD Protection for RS-232 I/O Pins
- ±15 kV (Human-Body Model)
- ±8 kV (IEC 61000-4-2, Contact Discharge)
- ±15 kV (IEC 61000-4-2, Air-Gap Discharge)
- 300-µA Operating Supply Current
- 1-µA Low-Power Standby Mode (With Receivers Active)
- Designed to Transmit at a Data Rate of
460 kbps - Auto-Powerdown Plus Option Features Flexible Power-Saving Mode
- Operates From a Single 2.25-V to 3-V VCC Supply
- Designed to be Interchangeable With Industry Standard '3318 Devices
The TRS3318E is a dual-driver, dual-receiver, RS-232-compatible transceiver. The device features auto-powerdown plus and enhanced electrostatic discharge (ESD) protection integrated into the chip. Driver output and receiver input are protected to ±15 kV using the IEC 61000-4-2 Air-Gap Discharge method, ±8 kV using the IEC 61000-4-2 Contact Discharge method, and ±15 kV using the Human-Body Model (HBM).
The device operates at a data rate of 460 kbps. The transceiver has a proprietary low-dropout driver output stage, enabling RS-232-compatible operation from a 2.25-V to 3-V supply with a dual charge pump. The charge pump requires only four 0.1-µF capacitors and features a logic-level output (READY) that asserts when the charge pump is regulating and the device is ready to begin transmitting.
The TRS3318E achieves a 1-µA supply current using the auto-powerdown feature. This device automatically enters a low-power power-down mode when the RS-232 cable is disconnected or the drivers of the connected peripherals are inactive for more than 30 s. The device turns on again when it senses a valid transition at any driver or receiver input. Auto-powerdown saves power without changes to the existing BIOS or operating system.
This device is available in two space-saving packages: 20-pin SSOP and 20-pin TSSOP.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | TRS3318E 2.5-V 460-kbps RS-232 Transceiver With +/-15-kV ESD Protection datasheet (Rev. B) | 2013. 10. 11 | ||
| 기술 문서 | How the RS-232 transceiver’s regulated charge-pump circuitry works | PDF | HTML | 2018. 6. 28 | ||
| 애플리케이션 노트 | Understanding Power Requirements in RS-232 Applications (Rev. B) | 2013. 4. 26 | |||
| 애플리케이션 노트 | Removing Ground Noise in Data Transmission Systems | 2007. 10. 5 | |||
| 애플리케이션 노트 | Interface Circuits for TIA/EIA-232-F (Rev. A) | 2002. 9. 19 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TIDA-00540 — RS-485/RS-232 다중 프로토콜 트랜시버 레퍼런스 디자인
이 설계(TIDA-00540)를 사용하면 각각에 대한 별도의 배선 없이도 RS-485 또는 RS-232 데이터 버스를 통한 통신이 가능합니다. 두 개의 서로 다른 트랜시버 유형이 데이터 라인을 공유하며, 단일 제어 신호를 통해 사용할 프로토콜을 결정합니다.
TIDA-060008 — RS-232 시그널을 RS-485 시그널로 변환하는 레퍼런스 설계
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| TSSOP (PW) | 20 | Ultra Librarian |
| SSOP (DB) | 20 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.