TRS3232
- RS-232 Bus-terminal ESD protection exceeds ±15 kV using human-body model (HBM)
- Meets or exceeds the requirements of TIA/EIA-232-F and ITU V.28 standards
- Operates with 3-V to 5.5-V VCC supply
- Operates up to 250 kbps
- Two drivers and two receivers
- Low supply current: 300-µA typical
- External capacitors: 4 × 0.1 µF
- Accepts 5-V logic input with 3.3-V supply
- Alternative high-speed terminal-compatible devices s (1 Mbps)
- SN65C3232 (–40°C to 85°C)
- SN75C3232 (0°C to 70°C)
The TRS3232 consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection terminal-to-terminal (serial-port connection terminals, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from one 3-V to 5.5-V supply. The devices operate at data-signaling rates up to 250 kbps and a maximum of 30-V/µs driver-output slew rate.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | TRS3232 3-V to 5.5-V Multichannel RS-232 Line Driver and Receiver With ±15-kV ESD Protection datasheet (Rev. B) | PDF | HTML | 2021. 6. 8 | |
| 인증서 | TRS3232RGTEVM EU RoHS Declaration of Conformity (DoC) (Rev. A) | 2020. 12. 7 | |||
| 애플리케이션 노트 | RS-232 Frequently Asked Questions | 2020. 11. 10 | |||
| 기술 문서 | Designing compact, efficient and high performing multiparameter patient monitors | PDF | HTML | 2019. 6. 25 | ||
| 애플리케이션 노트 | Understanding Power Requirements in RS-232 Applications (Rev. B) | 2013. 4. 26 | |||
| 애플리케이션 노트 | AN-438 Low Power RS-232C Driver and Receiver in CMOS (Rev. B) | 2013. 4. 26 | |||
| 애플리케이션 노트 | Removing Ground Noise in Data Transmission Systems | 2007. 10. 5 | |||
| 애플리케이션 노트 | Interface Circuits for TIA/EIA-232-F (Rev. A) | 2002. 9. 19 | |||
| 애플리케이션 노트 | Low-Voltage, Single-Supply 232-Standard Interface Solutions (Rev. A) | 2000. 9. 19 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TIDA-00163 — 절연 RS-232-UART 컨버터 레퍼런스 디자인
This design implements an isolated data converter that utilizes residual power from the interface to power itself. This removes the requirement for expensive power transmission across the isolation boundary. By easily enabling the ubiquitous RS-232 connection on an electric meter, features like (...)
TIDA-00601 — 절연 션트 센서를 사용한 멀티 위상 에너지 측정 레퍼런스 디자인
TIDA-00601 설계는 절연 션트 센서를 사용하여 0.5% 등급의 3상 에너지 측정 시스템을 구현합니다. 입력 회로에서 정전식으로 절연된 출력 회로를 갖는 절연 델타-시그마 모듈레이터를 사용하여 절연을 달성합니다. 에너지 측정 SoC는 절연 모듈레이터에서 다양한 비트 스트림을 받아 온보드 디지털 필터를 사용하여 ADC 샘플 판독값을 생성합니다. 에너지 측정 SoC는 또한 전압을 감지하여, 계측 매개 변수 값을 계산하고, 보드의 LCD 구동, 보드의 절연 RS-232 회로를 통한 PC GUI와 통신하는 데에 사용됩니다.
이 (...)
TIDA-00839 — 저전력 홀 효과 센서를 사용한 자기 변조 감지 레퍼런스 설계
자기 변조는 에너지 측정 시스템의 변압기를 마비시킬 수 있으며, 이로 인해 시스템에 전원이 제대로 공급되지 않거나 부하에서 소비되는 에너지를 올바르게 등록하지 못할 수 있습니다. 이 설계는 홀 센서를 사용하여 자기 변조를 감지하는 클래스 0.2 3상 에너지 측정 시스템을 구현합니다. 자기 변조 감지는 주 및 백업 전원에서 모두 실행될 때 활성화됩니다. 백업 전원에서 실행할 때 배터리 수명을 늘리기 위해 홀 센서의 전류 소비를 줄이는 데 사용됩니다.
TIDA-01088 — 절연 션트 센서를 사용한 멀티 위상 전력 품질 측정 레퍼런스 디자인
TIDA-010999 — Direct current (DC) electricity meter reference design
The Direct Current (DC) electricity meter reference design enables end users to evaluate a design combining isolated data converters (ISO-ADC) with an ultra-low-power 32-bit MCU based on the enhanced Arm® Cortex®-M0+ core. This design delivers revenue-grade accuracy appropriate for billing (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOIC (D) | 16 | Ultra Librarian |
| SOIC (DW) | 16 | Ultra Librarian |
| TSSOP (PW) | 16 | Ultra Librarian |
| SSOP (DB) | 16 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.