홈 전력 관리 DC/DC 전력 모듈 벅 모듈(통합 인덕터)
홈
전력 관리
DC/DC 전력 모듈
벅 모듈(통합 인덕터)
신규

TPSM83101L

활성

일체형 인덕터가 있는 1.5A 고효율 벅 부스트 모듈

지금 주문하기
데이터 시트

TPSM83101L

활성
데이터 시트 지금 주문하기

제품 상세 정보

Rating Catalog Topology Buck-Boost Iout (max) (A) 2 Vin (max) (V) 5.5 Vin (min) (V) 1.6 Vout (max) (V) 5.5 Vout (min) (V) 1.2 Features Enable, Light-load efficiency, Load Disconnect, Synchronous rectification, UVLO fixed Operating temperature range (°C) -40 to 125 Switch current limit (typ) (A) 3 Type Module Duty cycle (max) (%) 100 Switching frequency (min) (kHz) 1800 Switching frequency (max) (kHz) 2200
Rating Catalog Topology Buck-Boost Iout (max) (A) 2 Vin (max) (V) 5.5 Vin (min) (V) 1.6 Vout (max) (V) 5.5 Vout (min) (V) 1.2 Features Enable, Light-load efficiency, Load Disconnect, Synchronous rectification, UVLO fixed Operating temperature range (°C) -40 to 125 Switch current limit (typ) (A) 3 Type Module Duty cycle (max) (%) 100 Switching frequency (min) (kHz) 1800 Switching frequency (max) (kHz) 2200
USIP (SIU) 8 See data sheet
  • 1.6V to 5.5V input voltage range
    • Device input voltage > 1.65V for start-up
  • 1.2V to 5.5V output voltage range
    • 1.0V Vout is supported in PFM mode
  • High output current capability, 3A peak switch current
    • 1.5A Iout for VIN ≥ 3V, VOUT = 3.3V
    • 1.2A Iout for VIN ≥ 2.7V, VOUT = 3.3V
  • Active output discharge (TPSM83101, TPSM83101L only)
  • High efficiency over the entire load range
    • 8µA typical quiescent current
    • Automatic power save mode and forced PWM mode
  • Peak current buck-boost mode architecture
    • Seamless mode transition
    • Forward and reverse current operation
    • Start-up into prebiased outputs
    • Fixed-frequency operation with 2MHz switching
  • Safety and robust operation features
    • Overcurrent protection and short-circuit protection
    • Integrated soft start with active ramp adoption
    • Overtemperature protection and overvoltage protection
    • True shutdown function with load disconnection
    • Forward and backward current limit
  • Small design size
    • MicroSiP™ power module with integrated inductor
    • 2.0mm × 2.6mm × 1.2mm(max) 8-pin µSiP package
  • Create a custom design using the TPSM8310xx device with the WEBENCH® Power Designer
  • 1.6V to 5.5V input voltage range
    • Device input voltage > 1.65V for start-up
  • 1.2V to 5.5V output voltage range
    • 1.0V Vout is supported in PFM mode
  • High output current capability, 3A peak switch current
    • 1.5A Iout for VIN ≥ 3V, VOUT = 3.3V
    • 1.2A Iout for VIN ≥ 2.7V, VOUT = 3.3V
  • Active output discharge (TPSM83101, TPSM83101L only)
  • High efficiency over the entire load range
    • 8µA typical quiescent current
    • Automatic power save mode and forced PWM mode
  • Peak current buck-boost mode architecture
    • Seamless mode transition
    • Forward and reverse current operation
    • Start-up into prebiased outputs
    • Fixed-frequency operation with 2MHz switching
  • Safety and robust operation features
    • Overcurrent protection and short-circuit protection
    • Integrated soft start with active ramp adoption
    • Overtemperature protection and overvoltage protection
    • True shutdown function with load disconnection
    • Forward and backward current limit
  • Small design size
    • MicroSiP™ power module with integrated inductor
    • 2.0mm × 2.6mm × 1.2mm(max) 8-pin µSiP package
  • Create a custom design using the TPSM8310xx device with the WEBENCH® Power Designer

The TPSM83100, TPSM83101, and TPSM83101L are constant frequency peak current mode control buck-boost MicroSiP™ power modules optimized for small design size and high efficiency. The power modules integrate an inductor to simplify design, reduce external components, and save PCB area. The power modules have a 3A peak current limit (typical) and 1.6V to 5.5V input voltage range. The TPSM83100 and TPSM83101, TPSM83101L provide a power supply design for system pre-regulators and voltage stabilizers.

Depending on the input voltage, the TPSM83100 and TPSM83101, TPSM83101L automatically operate in boost, buck, or in 3-cycle buck-boost mode when the input voltage is approximately equal to the output voltage. The transitions between modes happen at a defined duty cycle and avoid unwanted toggling within the modes to reduce output voltage ripple. 8µA quiescent current and power save mode enable the highest efficiency for light to no-load conditions.

The TPSM83100, TPSM83101, and TPSM83101L are constant frequency peak current mode control buck-boost MicroSiP™ power modules optimized for small design size and high efficiency. The power modules integrate an inductor to simplify design, reduce external components, and save PCB area. The power modules have a 3A peak current limit (typical) and 1.6V to 5.5V input voltage range. The TPSM83100 and TPSM83101, TPSM83101L provide a power supply design for system pre-regulators and voltage stabilizers.

Depending on the input voltage, the TPSM83100 and TPSM83101, TPSM83101L automatically operate in boost, buck, or in 3-cycle buck-boost mode when the input voltage is approximately equal to the output voltage. The transitions between modes happen at a defined duty cycle and avoid unwanted toggling within the modes to reduce output voltage ripple. 8µA quiescent current and power save mode enable the highest efficiency for light to no-load conditions.

filter 기타 벅 모듈(통합 인덕터) 찾기
다운로드 스크립트와 함께 비디오 보기 비디오

기술 자료

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
1개 모두 보기
상위 문서 유형 직함 형식 옵션 최신 영어 버전 다운로드 날짜
* 데이터 시트 TPSM8310xx 1.5A Output Current, Buck-Boost MicroSiP™ Power Module With Integrated Inductor datasheet (Rev. C) PDF | HTML 2026. 3. 18

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

패키지 핀 CAD 기호, 풋프린트 및 3D 모델
USIP (SIU) 8 Ultra Librarian
TI의 평가 항목에 대한 표준 약관이 적용됩니다.

주문 및 품질

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

포럼 주제 모두 보기(영문)

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상