TPSM82912
- Low output noise < 20 µVRMS(100 Hz to 100 kHz)
- Low output voltage ripple < 10 µVRMS after ferrite bead
- High PSRR of > 65 dB (up to 100 kHz)
- 2.2-MHz or 1-MHz fixed frequency peak current mode control
- Synchronizable with external clock (optional)
- Integrated loop compensation supports ferrite bead for second stage L-C filter with 30-dB attenuation (optional)
- Spread spectrum modulation (optional)
- 3.0-V to 17-V input voltage range
- 0.8-V to 5.5-V output voltage range
- 57-mΩ/20-mΩ RDSon
- Output voltage accuracy of ±1%
- Precise enable input allows
- User-defined undervoltage lockout
- Exact sequencing
- Adjustable soft start
- Power-good output
- Output discharge (optional)
- –40°C to 125°C junction temperature range
- –55°C to 125°C for -ET versions
- Create a custom design using the TPSM8291x with the WEBENCH Power Designer
The TPSM8291x devices are a family of high-efficiency, low-noise and low-ripple current mode synchronous buck power modules. The devices are ideal for noise sensitive applications that would normally use an LDO for post regulation such as high-speed ADCs, clock and jitter cleaner, serializer, de-serializer, and radar applications.
The devices operate at a fixed switching frequency of 2.2 MHz or 1 MHz and can be synchronized to an external clock.
To further reduce the output voltage ripple, the device integrates loop compensation to operate with an optional second-stage ferrite bead L-C filter. This feature allows an output voltage ripple below 10 µVRMS.
Low-frequency noise levels, similar to a low-noise LDO, are achieved by filtering the internal voltage reference with an integrated capacitor on the NR/SS pin. An external capacitor can be added to the module for additional filtering.
The optional spread spectrum modulation scheme spreads the DC/DC switching frequency over a wider span, which lowers the mixing spurs.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | TPSM8291x 3-V to 17-V, 2-A/3-A Low-Noise and Low-Ripple Buck Power Module with Integrated Ferrite Bead Filter Compensation datasheet (Rev. C) | PDF | HTML | 2023. 7. 18 | |
| Application brief | Solving Power Design Challenges in Semiconductor Test and ATE Applications (Rev. A) | PDF | HTML | 2025. 12. 2 | ||
| 백서 | 저잡음 전력 장치로 전력 아키텍처 간소화 (Rev. A) | PDF | HTML | Download English Version (Rev.A) | 2024. 11. 19 | |
| 기술 문서 | 저잡음 및 저리플 설계 기술로 전력 및 신호 무결성을 향상시키는 방법 | PDF | HTML | Download English Version | 2024. 10. 4 | |
| 백서 | 고전압 시스템의 전력 변환 간소화 | PDF | HTML | Download English Version | 2023. 11. 10 | |
| Application brief | Solving power design challenges in oscilloscope applications | PDF | HTML | 2023. 10. 31 | ||
| Application brief | Solving Power Design Challenges in Medical Imaging Applications | PDF | HTML | 2023. 7. 12 | ||
| 인증서 | TPSM82912EVM EU Declaration of Conformity (DoC) | 2022. 9. 27 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPSM82912EVM — TPSM82912 2A 저잡음 및 저리플 벅 모듈 평가 모듈
TIDA-010962 — ATE(자동 테스트 장비) 80V 개별 부동 VI 레퍼런스 설계
이 레퍼런스 설계는 4사분면 개별 부동 전압 및 전류(VI) 설계를 나타낸 것입니다. 전압 출력은 ±40V 및 0V~80V 범위를 지원하며, 전류 범위는 500mA, 10mA, 10μA의 세 가지입니다. 이 설계는 아날로그 피드백 루프를 지원하며 FV(강제 전압), FI(강제 전류), 버퍼, 갱 모드에서 작동합니다. 이 레퍼런스 설계는 20비트 강제 DAC(디지털-아날로그 컨버터), 18비트, 2채널 ADC(아날로그-디지털 컨버터) 및 정밀 신호 체인을 사용해 보정 후 제어 측정에 0.01%의 정확도를 달성합니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| B0QFN (RDU) | 28 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.