TPSI3052
- No isolated secondary supply required
- Drives external power transistors or SCRs
- 3-kV RMS basic isolation
- 15-V gate drive with 1.5/3-A peak source and sink current
- Up to 50-mW supply for external auxiliary circuitry
- Supports AC or DC switching
- Supports two-wire or three-wire modes
- Seven levels of power transfer, resistor selectable
- Functional Safety-Capable
- Temperature range –40 to 125°C ambient
- Safety-Related Certifications
- 4243-V PK basic isolation per DIN EN IEC 60747-17 (VDE 0884-17)
- 3-kV RMS isolation for 1 minute per UL 1577
The TPSI3052 is a fully integrated, isolated switch driver, which when combined with an external power switch, forms a complete isolated solid state relay (SSR). With a nominal gate drive voltage of 15 V with 1.5/3.0-A peak source and sink current, a large variety of external power switches can be chosen to meet a wide range of applications. The TPSI3052 generates its own secondary bias supply from the power received from its primary side, so no isolated secondary supply bias is required. Additionally, the TPSI3052 can optionally supply power to external supporting circuitry for various application needs.
The TPSI3052 supports two modes of operation based on the number of input pins required. In two-wire mode, typically found in driving mechanical relays, controlling the switch requires only two pins and supports a wide voltage range of operation of 6.5 V to 48 V. In three-wire mode, the primary supply of 3 V to 5.5 V is supplied externally, and the switch is controlled through a separate enable. Available in three-wire mode only, the TPSI3052S features a one-shot enable for the switch control. This feature is useful for driving SCRs that typically require only one pulse of current to trigger.
The secondary side provides a regulated, floating supply rail of 15 V for driving a large variety of power switches with no need for a secondary bias supply. The application can drive single power switches for DC applications or dual back-to-back power switches for AC applications, as well as various types of SCR. The TPSI3052 integrated isolation protection is extremely robust with much higher reliability, lower power consumption, and increased temperature ranges than traditional mechanical relays and optocouplers.
The power transfer of the TPSI3052 can be adjusted by selecting one of seven power level settings using an external resistor from the PXFR pin to VSSP. This action allows for tradeoffs in power dissipation versus power provided on the secondary depending on the needs of the application.
관심 가지실만한 유사 제품
비교 대상 장치보다 업그레이드된 기능을 지원하는 즉각적 대체품.
기술 자료
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPSI3052Q1EVM — 강화 절연 및 15V 게이트 드라이브가 갖춰진 TPSI3052-Q1 평가 모듈
TPSI3052Q1EVM은 TPSI3052-Q1 장치의 기능을 철저하게 평가하기 위해 다중 테스트 포인트와 점퍼를 포함하고 있는 2개 구리층 보드입니다.
TPSI3052-Q1 and TPSI3052 PSpice Transient Model (DWZ Package, Standard Enable) (Rev. E)
TPSI3052S-Q1 and TPSI3052S PSpice Transient Model (DWZ Package, One-Shot Enable) (Rev. E)
ACTIVE-PRECHARGE-CALC — 활성 사전 충전 레퍼런스 설계(TIDA-050063) 계산기 툴
SLVRBI9 — TPSI305x 설계 계산기
TIDA-050058 — 솔리드 스테이트 릴레이 레퍼런스 설계를 위한 제로 크로스 스위칭
레퍼런스 설계는 솔리드 스테이트 릴레이를 사용해 ZCS(제로 크로스 스위칭)를 달성하는 방법을 보여줍니다. 이 레퍼런스 설계에는 TPSI3050-Q1 절연 스위치 드라이버가 포함되어 있습니다. TPSI3050-Q1 장치는 2차측으로 신호와 전원을 전달하면서 라미네이트 변압기를 통합해 절연을 구현합니다. 따라서 절연 바이어스 전원 공급 장치가 전혀 필요하지 않습니다. 또한, TPSI3050-Q1 장치는 고압(HV) 측에 위치한 외부 회로에 보조 전류(IAUX)를 공급할 수 있습니다. ZCS는 저압(LV) 측과 HV 측 사이에 신호 (...)
TIDA-050059 — 솔리드 스테이트 릴레이 레퍼런스 설계용 과전류 및 과열 보호 기능
이 레퍼런스 설계에서는 솔리드 스테이트 릴레이에 대해 과전류 및 과열 보호 방법을 보여줍니다. 이 레퍼런스 설계에는 TPSI3050-Q1 5kVRMS 강화 절연 스위치 드라이버가 포함되어 있습니다. TPSI3050-Q1 장치는 2차측으로 신호와 전원을 전달하면서 라미네이트 변압기를 통합해 절연을 구현합니다. 따라서 절연 바이어스 전원 공급 장치가 전혀 필요하지 않습니다. 또한, TPSI3050-Q1 장치는 고압(HV) 측에 위치한 외부 회로에 전원을 공급할 수 있습니다. 이 레퍼런스 설계는 최대 4A 부하 조건으로 최대 500V (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SO-MOD (DWZ) | 8 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.