TPS7B81
- Wide input voltage range: 3 V to 40 V
- Output current: 150 mA
- Ultra-low quiescent current
(IQ):
- 2.7 µA typical at light loads
- 4.5 µA maximum at light loads
- Accuracy: 1.5% over line, load, and temperature
- Typical dropout voltage: 180 mV at 100 mA
- Wide enable voltage range: 2 V to VIN (40 V max)
- Input voltage transient tolerance: 45 V
- Fixed 5-V and 3.3-V output options
- Current limit and thermal shutdown protection
- Stable with a wide range of capacitors (1 µF to 200 µF)(1)
- Junction temperature range: –40°C to +150°C
- High thermal performance
packages:
- DGN (8-pin HVSSOP), RθJA = 63.9°C/W
- DRV (6-pin WSON), RθJA = 72.8°C/W
(1)
(1)See the output capacitor requirements in the Recomended Operation Conditions table
The TPS7B81 is a low-dropout (LDO) linear regulator that operates from input voltages up to 40 V and can supply up to 150 mA in current. With only 2.7 µA of quiescent current at light loads, the device is an excellent choice for wide input supply designs and high cell count battery applications that need very low standby power consumption. The 45-V transient tolerance provides additional headroom for applications where inductive kickback may be present, thereby reducing external circuitry for voltage suppression.
With integrated short-circuit and overcurrent limiting, the TPS7B81 protects the system during fault conditions. In addition to the low standby power consumption, the very low dropout voltage in light load conditions helps maintain regulation even when powered by depleted batteries.
The TPS7B81 is available in thermally enhanced, 8-pin HVSSOP and 6-pin WSON packages. Both packages offer high thermal conductivity, and their small size supports compact design, making them well suited for space-limited applications such as power tools or motor drive modules and battery packs.
관심 가지실만한 유사 제품
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | TPS7B81 150-mA, 40-V, Ultra-Low-IQ, Low-Dropout Regulator datasheet | PDF | HTML | 2020. 4. 23 | |
| 애플리케이션 노트 | An empirical analysis of the impact of board layout on LDO thermal performance (Rev. A) | PDF | HTML | 2025. 9. 23 | ||
| 백서 | Understanding the Foundations of Quiescent Current in Linear Power Systems | 2021. 2. 18 | |||
| 애플리케이션 노트 | A Topical Index of TI LDO Application Notes (Rev. F) | 2019. 6. 27 | |||
| e북 | LDO Basics (Rev. A) | 2019. 4. 8 | |||
| 기술 문서 | LDO basics: dropout | PDF | HTML | 2017. 3. 16 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPS7B81EVM-025 — TPS7B81 150mA, 오프 배터리(40V), 초저 IQ, 저손실 전압 레귤레이터 평가 모듈
TPS7B81EVM-025 평가 모듈(EVM)은 150mA, 고전압, 초저 IQ, LDO(저손실) 선형 레귤레이터인 TPS7B81의 작동 및 성능을 평가하기 위한 일반적인 구성으로 설계되었습니다.
EVM 회로 보드는 최대 150mA의 동적 부하까지 전류가 필요한 엔지니어링 애플리케이션을 위한 레퍼런스 설계로 구성되어 있습니다.
PMP23454 — 범용 입력, 430W 전동 공구 충전기 레퍼런스 설계
TIDA-010253 — 에너지 저장 시스템을 위한 배터리 제어 장치 레퍼런스 디자인
이 레퍼런스 디자인은 고전압 리튬 이온(리튬-이온), 리튬 인산철(LiFePO4) 배터리 랙을 위한 중앙 컨트롤러입니다. 이 디자인은 고전압 릴레이, 통신 인터페이스(RS-485, CAN(컨트롤러 영역 네트워크), 데이지 체인 및 이더넷 포함), 습도 센서에 대한 확장 가능한 인터페이스, 고전압 아날로그-디지털 컨버터(ADC) 및 전류 센서를 위한 구동 회로를 제공합니다.
이 디자인은 고성능 마이크로컨트롤러를 사용하여 애플리케이션을 개발 및 테스트합니다. 이러한 기능을 통해 고용량 배터리 랙 애플리케이션의 중앙 컨트롤러에 이 (...)
TIDA-010276 — BLDC 모터 제어를 위한 36V, 50A 3상 GaN 인버터 레퍼런스 설계
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| HVSSOP (DGN) | 8 | Ultra Librarian |
| WSON (DRV) | 6 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.