TPS7A96
- Ultra-low output noise:
- 0.5 µV RMS (typ, 10 Hz to 100 kHz)
- High power-supply ripple
rejection (PSRR):
- 94 dB at 100Hz
- 104 dB at 1 kHz
- 76 dB at 10 kHz
- 58 dB at 100 kHz
- 48 dB at 1 MHz
- Accuracy over line, load, and temperature: 1%
- Low dropout: 160 mV at 2 A
- Wide input voltage range: 1.9 V to 5.7 V
- Wide output voltage range: 0.4 V to 5.5 V
- Parallelable for lower noise and higher current
- Fast transient response
- Precision enable and UVLO
- Programmable current limit
- Programmable PG threshold
- Adjustable start-up inrush control
- Open-drain, power-good (PG) output
- Package: 3.00-mm × 3.00-mm,
10-pin WSON:
- JEDEC R θJA: 46.1°C/W
- EVM R θJA: 25.6°C/W
The TPS7A96 is an ultra-low noise (0.5 µV RMS), low-dropout (LDO) voltage regulator capable of sourcing 2 A with only 200 mV of dropout. The low dropout, in conjunction with a wide bandwidth error amplifier, allows for very high PSRR (104 dB at 1 kHz and 48 dB at 1 MHz) under low operating headroom (500 mV) and high output current (1.75 A).
The device output is adjustable from 0.4 V to 5.5 V with an external resistor. With the wide input voltage range, the device supports operation as low as 1.9 V and up to 5.7 V. The device includes a programmable current limit, programmable PG threshold, and precision enable, allowing better control in the application.
With the high-accuracy reference and wide-bandwidth topology, the device can be easily paralleled to achieve lower noise and higher current.
With 1% output voltage accuracy (over line, load, and temperature) and soft-start capabilities to reduce inrush current, the device is designed for powering sensitive analog low-voltage devices.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | TPS7A96 2-A, Ultra-Low Noise, Ultra-High PSRR, RF Voltage Regulator datasheet (Rev. A) | PDF | HTML | 2023. 7. 20 | |
| 백서 | 초저잡음 LDO의 출력 잡음 측정 | PDF | HTML | 2026. 5. 11 | ||
| 백서 | Demystifying LDO Turn-On (Start-Up) Time (Rev. B) | PDF | HTML | 2026. 3. 10 | ||
| 백서 | Reduce System Noise Using Parallel LDOs | PDF | HTML | 2025. 11. 3 | ||
| Circuit design | Voltage Margining and Scaling Circuit with a Voltage Output Smart DAC (Rev. A) | PDF | HTML | 2024. 4. 17 | ||
| Circuit design | Voltage Margining and Scaling Circuit With Current Output Smart DAC (Rev. A) | PDF | HTML | 2024. 4. 16 | ||
| 인증서 | TPS7A96EVM EU Declaration of Conformity (DoC) | 2023. 5. 25 | |||
| 백서 | Parallel LDO Architecture Design Using Ballast Resistors | PDF | HTML | 2022. 12. 14 | ||
| 백서 | Comprehensive Analysis and Universal Equations for Parallel LDO's Using Ballast | PDF | HTML | 2022. 12. 13 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPS7A94EVM-046 — TPS7A94 1A, 초저잡음, 초저 PSRR, RF 전압 레귤레이터 평가 모듈
엔지니어들은 TPS7A94 평가 모듈(EVM)을 이용해 자체 회로 애플리케이션 사용 용도로 TPS7A94 선형 레귤레이터의 작동과 성능을 평가할 수 있습니다. 이 EVM 구성에는 광범위한 애플리케이션에서 사용 가능한 저잡음, 소형, 저손실(LDO) 레귤레이터가 포함되어 있습니다.
이 레귤레이터는 낮은 VIN~VOUT 드롭아웃 전압 부하에 최대 1A까지 공급할 수 있습니다. 안정성을 위해서는 최소 디레이팅 출력 커패시턴스 4.7μF(또는 그 이상)부터 최대 1mF를 사용하세요.
TPS7A96EVM-106 — 2A, 초저잡음, 초저 PSRR RF 전압 레귤레이터용 TPS7A96 평가 모듈
TPS7A96 평가 모듈(EVM)은 선형 레귤레이터 TPS7A96 제품군의 작동과 성능을 평가합니다. 이 EVM 구성에는 광범위한 애플리케이션에서 사용 가능한 저잡음, 소형, 저손실(LDO) 레귤레이터가 포함되어 있습니다. 이 레귤레이터는 낮은 VIN~VOU 드롭아웃 전압 부하에 최대 2A까지 공급할 수 있습니다. 안정성을 위해서는 최소 디레이팅 커패시턴스 4.7μF(또는 그 이상) 출력 커패시터부터 최대 1mF를 사용하십시오.
PARALLEL-LDO-CALC — Parallel low-dropout (LDO) calculator
병렬 저손실(LDO) 계산기는 밸러스트 저항을 사용하여 병렬 LDO 레귤레이터에 대한 최악의 분석을 제공하는 Microsoft® Excel® 기반 툴입니다. 이 툴은 사용자가 시스템 요구 사항 세트에 필요한 병렬 LDO 레귤레이터의 최소 수와 최적의 밸러스트 저항을 식별하는 데 도움이 됩니다.
병렬 애플리케이션에 사용되는 일반적인 LDO 레귤레이터에 대한 데이터 시트 정보는 계산기에 미리 채워져 있습니다. 사용자는 시스템 요구 사항을 기반으로 시스템 요구 사항에 가장 잘 맞는 LDO 레귤레이터 디바이스를 평가할 수 있습니다.
TIDA-010269 — 핸드헬드 초음파 영상 장치 전원 공급 장치 레퍼런스 설계
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| WSON (DSC) | 10 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.