이 제품의 최신 버전이 있습니다
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능.
TPS7A4101
- Wide Input Voltage Range: 7 V to 50 V
- Accuracy:
- Nominal: 1%
- Over Line, Load, and Temperature: 2.5%
- Low Quiescent Current: 25 µA
- Quiescent Current at Shutdown: 4.1 µA
- Maximum Output Current: 50 mA
- CMOS Logic-Level-Compatible Enable Pin
- Adjustable Output Voltage: about 1.175 V to 48 V
- Stable
with Ceramic Capacitors:
- Input Capacitance: ≥ 1 µF
- Output Capacitance: ≥ 4.7 µF
- Dropout Voltage: 290 mV
- Built-In Current Limit and Thermal Shutdown Protection
- Package: High Thermal Performance HVSSOP-8 PowerPAD™
- Operating Temperature Range: –40°C to 125°C
The TPS7A4101 is a very high voltage-tolerant linear regulator that offers the benefits of a thermally-enhanced package (HVSSOP-8), and is able to withstand continuous DC or transient input voltages of up to 50 V.
The TPS7A4101 is stable with any output capacitance greater than 4.7 µF and any input capacitance greater than 1 µF (over temperature and tolerance). Thus, implementations of this device require minimal board space because of its miniaturized packaging (HVSSOP-8) and a potentially small output capacitor. In addition, the TPS7A4101 offers an enable pin (EN) compatible with standard CMOS logic, to enable a low-current shutdown mode.
The TPS7A4101 has an internal thermal shutdown and current limiting to protect the system during fault conditions. The HVSSOP-8 packages has an operating temperature range of TJ = –40°C to 125°C.
In addition, the TPS7A4101 is ideal for generating a low-voltage supply from intermediate voltage rails in telecom and industrial applications; not only can the device supply a well-regulated voltage rail, but the device can also withstand and maintain regulation during very high and fast voltage transients. These features translate to simpler and more cost-effective electrical surge-protection circuitry for a wide range of applications.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | TPS7A4101 50-V Input Voltage, 50-mA, Very High Voltage Linear Regulator datasheet (Rev. B) | PDF | HTML | 2018. 11. 14 | |
| 애플리케이션 노트 | A Topical Index of TI LDO Application Notes (Rev. F) | 2019. 6. 27 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPS7A4001EVM-709 — TPS7A4001 저손실(LDO) 선형 레귤레이터 평가 모듈
PMP40871 — 48V 출력 저잡음 팬텀 전원 레퍼런스 디자인
TIDA-00215 — 유도성 센서를 사용한 거리 및 무게 측정 레퍼런스 디자인
The Distance and Weight Measurement Using Inductive Sensing Reference Design is a sub-system design which converts a distance measurement to a weight measurement. This design is intended as a reference design for building automation and weigh scale applications. In mechanical systems, there (...)
TIDA-00500 — PLC 모듈용 커패시터 기반 백업 전원 공급 장치 레퍼런스 디자인
TIDA-00500 is a reference design to provide power to load for short duration of time after a power interrupt has occurred. Traditionally Programmable Logic Controllers (PLCs) are equipped with a recharge battery source for alternative power. This battery source often suffers from drawbacks like (...)
TIDA-00550 — PLC용 듀얼 채널-채널 절연 범용 아날로그 입력 모듈 레퍼런스 디자인
프로그래머블 로직 컨트롤러(PLC)를 위한 이중 채널-채널 절연 범용 아날로그 입력 모듈 레퍼런스 설계인 TIDA-00550은 정밀성과 유연성이 접목된 설계입니다. 센서 트랜스미터와 함께 사용되는 이 레퍼런스 설계는 표준 입력 전압 및 전류는 물론 열전대, RTD 및 4~20mA 루프를 측정할 수 있습니다. 입력 단자가 4개뿐이므로 최소한의 사용 공간과 높은 범용성 및 성능이 동시에 요구되는 애플리케이션에 적합합니다.
TIDA-00737 — 자동 역률 컨트롤러를 위한 커패시터 뱅크 제어 및 HMI 서브시스템 레퍼런스 디자인
이 레퍼런스 설계는 MV/LV 전력 분배에 사용되는 자동 역률 컨트롤러(PFC)의 다양한 기능 블록의 작동을 보여줍니다. 여기에는 전압, 전류, 전력 및 역률의 정확한 측정 및 계산, 4자리 7세그먼트 디스플레이를 사용한 측정된 매개 변수 표시, LED를 사용한 경보 및 상태 표시, 스위칭 커패시터 뱅크 또는 사이리스터 구동용 스위칭 출력, TI 포트폴리오의 다양한 제품을 사용하여 로컬 및 원격 온도 모니터링이 포함됩니다.
TIDA-01081 — 머신 러닝을 위한 LED 조명 제어 레퍼런스 설계
TIDA-01504 — HART® 모뎀을 갖춘 고정밀, 루프 전원 공급, 4mA~20mA 필드 트랜스미터 레퍼런스 설계
이 레퍼런스 설계는 HART® 모뎀을 갖춘 루프 전원 방식의 고정확도 필드(센서) 송신기를 위대한 솔루션을 제공합니다. 이 설계에서는 부분적으로 분리된 4mA~20mA 전류 송신기, HART 모뎀, 마이크로컨트롤러 및 전원 조절 블록을 사용하여 스마트 필드 송신기 설계를 실현합니다. 이 설계는 HART FSK 물리적 계층 사양을 준수하며 FieldComm Group™ 에 등록되어 있습니다.
TIPD135 — 10uA-100mA, 0.05% 오류, 고압측 전류 감지 솔루션 레퍼런스 디자인
This precision verified design provides the theory, component selection, simulation, complete PCB schematic and layout, bill of materials, and measured performance of a split-supply, high-side four decade current sensing solution that can accurately detect load currents from 10uA-100mA. The (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| HVSSOP (DGN) | 8 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.