TPS732
- Stable with no output capacitor or any value or type of capacitor
- Input voltage range: 1.7V to 5.5V
- Ultra-low dropout voltage: 40mV typical at 250mA
- Excellent load transient response—with or without optional output capacitor
- NMOS topology provides low reverse leakage current
- Low noise: 30µVRMS typical (from 10kHz to 100kHz)
- 0.5% initial accuracy
- 1% overall accuracy (line, load, and temperature)
- Less than 1µA maximum IQ in shutdown mode
- Thermal shutdown and specified minimum and maximum current limit protection
- Available in multiple output voltage versions:
- Fixed outputs from 1.2V to 5V
- Adjustable outputs from 1.2V to 5.5V
- Custom outputs available
The TPS732 low-dropout (LDO) voltage regulator uses an NMOS pass transistor in a voltage-follower configuration. This topology is stable using output capacitors with low equivalent series resistance (ESR), and even allows operation without a capacitor. The device also provides high reverse blockage (low reverse current) and ground pin current that is nearly constant over all values of output current.
The TPS732 uses an advanced BiCMOS process to yield high precision while delivering very low dropout voltages and low ground pin current. Current consumption, when not enabled, is less than 1µA and designed for portable applications. The extremely low output noise (30µVRMS with 0.1µF CNR) is designed for powering VCOs. This device is protected by thermal shutdown and foldback current limit.
관심 가지실만한 유사 제품
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | TPS732 Capacitor-Free, NMOS, 250mA, Low-Dropout Regulator With Reverse Current Protection datasheet (Rev. S) | PDF | HTML | 2026. 4. 22 | |
| 애플리케이션 노트 | LDO Noise Demystified (Rev. B) | PDF | HTML | 2020. 8. 18 | ||
| 기술 문서 | LDO Basics: Thermals – How hot is your application? | PDF | HTML | 2017. 9. 20 | ||
| 애플리케이션 노트 | LDO PSRR Measurement Simplified (Rev. A) | PDF | HTML | 2017. 8. 9 | ||
| 사용 설명서 | TPS73x01DRBEVM-518 User's Guide | 2009. 8. 13 | |||
| 사용 설명서 | DEM-SOT223LDO Demonstration Fixture | 2003. 10. 15 | |||
| 추가 자료 | DMOS Delivers Dramatic Performance Gains to LDO Regulators (EDN mag) | 2001. 2. 14 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
DEM-SOT223LDO — DEM-SOT223LDO 호환 최대 양극 출력 LDO(SOT223(DCQ) 패키지)
The Texas Instruments DEM-SOT223LDO demonstration module (DEM) helps designers evaluate the operation and performance of Texas Instruments low-dropout regulators (LDOs). This module is compatible with most positive output LDOs offered in the SOT223 (DCQ) package.
TPS73201DRBEVM-518 — TPS73201DRBEVM-518 평가 모듈
PMP20489 — 고밀도 12Vin 0.8V 200A 및 3.3V 75A POL 레퍼런스 디자인
PMP2187 — 의료용 팩을 위한 플라이백 선형 레귤레이터(5.75V@10mA) 레퍼런스 설계
PMP21887 — ASIC용 고전류 360A 정적/600W 피크 코어 PMBus 전압 12상 레퍼런스 디자인
TIDA-00306 — 그리드 애플리케이션용 구리-광섬유 100BASE-FX 또는 1000BASE-X 미디어 컨버터 레퍼런스 디자인
이 레퍼런스 디자인에서는 DP83849 평가 보드를 사용하여 구리선 기반 레거시 장비를 광 네트워크에 쉽게 연결할 수 있는 10/100BASE-TX-10/100BASE-FX 미디어 컨버터를 구현하는 방법론을 자세히 설명합니다. 구리 기반 이더넷(10/100BASE-TX)은 그리드 로컬 영역 네트워크에서 광범위하게 사용되고 있지만 통신 거리가 제한되어 있습니다. 광섬유 네트워킹은 잘 정립되어 있으며 지속적인 비용 절감 효과를 거두고 있습니다. 광섬유 네트워크를 사용하여 광역 장비를 관리하는 것은 실용적이고 비용 효율적이어서 더 빠른 (...)
TIDA-00661 — 공기 회로 차단기를 위한 고해상도, 빠른 시동 아날로그 프론트 엔드 레퍼런스 디자인
TIDA-00661 레퍼런스 디자인은 ACB(에어 회로 차단기) 또는 MCCB(몰드형 케이스 회로 차단기)에 사용되는 ETU(전자 트립 장치)용 신호 처리 프론트 엔드 서브시스템을 갖추고 있습니다. 이 서브시스템은 ADC와 상호 작용하고 입력 처리를 위한 24비트 해상도와 빠른 시작(<3ms), ±2.5V 레귤레이터, FRAM 기반 마이크로컨트롤러(MCU)를 지원하는 델타-시그마 ADC로 구성됩니다. 서브시스템은 전체 사이클 RMS 전류를 계산하고, 결정을 내리고, 30ms 이내에 솔레노이드에 트립 신호를 제공하도록 설계되었습니다.
TIDA-00826 — 50Ohm, 2GHz 오실로스코프 프론트 엔드 레퍼런스 디자인
This reference design is part of an analog front-end for 50Ω-input oscilloscope application. System designers can readily use this evaluation platform to process input signals from DC to 2 GHz in both frequency-domain and time-domain applications.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOT-23 (DBV) | 5 | Ultra Librarian |
| SOT-223 (DCQ) | 6 | Ultra Librarian |
| VSON (DRB) | 8 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.