TPS715A
- Input voltage range:
- 2.5 V to 24 V
- Available output voltage
options:
- Fixed: 1.8 V to 5 V
- Adjustable: 1.205 V to 15 V
- Output current: Up to 80 mA
- Very low IQ: 3.2 µA at 80-mA load current
- Overcurrent protection
- Package:
- 3-mm × 3-mm VSON (DRB)
- 2-mm × 2-mm WSON (DRV)
- Operating junction temperature: –40°C to +125°C
- For MSP430-specific output voltages see the TPS715
The TPS715A low-dropout (LDO) linear voltage regulator is a low quiescent current device that offers the benefits of a wide input voltage range and low-power operation in miniaturized packaging. Thus, the TPS715A is designed for battery-powered applications and as a power-management attachment to low-power microcontrollers.
The TPS715A is available in both fixed and adjustable versions. For more flexibility or higher output voltages, the adjustable version uses external feedback resistors to set the output voltage from 1.205 V to 15 V. The TPS715A LDOs support a low dropout of 650 mV (typ) at 80 mA of load current. The low quiescent current (3.2 µA typically) is stable over the entire range of output load current (0 mA to 80 mA). The TPS715A (new chip) also features an internal soft-start to lower the inrush current. The built-in overcurrent limit helps protect the regulator in the event of a load short or fault.
The TPS715A is available in a 3-mm × 3-mm package for use in high power dissipation applications and a small 2-mm × 2-mm package for hand-held and ultra-portable applications. The 3-mm × 3-mm package is also available as a non-magnetic package for medical imaging applications.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | TPS715A 80-mA, 24-V, 3.2-μA Quiescent Current, Low-Dropout Linear Regulator datasheet (Rev. I) | PDF | HTML | 2023. 11. 10 | |
| 애플리케이션 노트 | L1 and L2 EV Charger Electric Vehicle Service Equipment Design Considerations (Rev. B) | 2021. 6. 9 | |||
| 애플리케이션 노트 | LDO Noise Demystified (Rev. B) | PDF | HTML | 2020. 8. 18 | ||
| 애플리케이션 노트 | A Topical Index of TI LDO Application Notes (Rev. F) | 2019. 6. 27 | |||
| 애플리케이션 노트 | LDO PSRR Measurement Simplified (Rev. A) | PDF | HTML | 2017. 8. 9 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPS71401DRVEVM-426 — TPS71401DRVEVM-426 평가 모듈
The TPS71401DRVEVM-426 facilitates evaluation of the TPS71401 10V, single output LDO linear regulator in the DRV (2mm x 2mm SON) package.
TPS715AXXEVM-065 — TPS715Axx 평가 모듈
TPS715EVM-074 — 50mA, 24V, 초저 IQ, LDO(저손실) 전압 레귤레이터용 TPS715 평가 모듈
TPS715 평가 모듈(EVM)은 회로 애플리케이션에서 TPS7B4255-Q1 선형 레귤레이터의 작동 및 성능 평가에 사용됩니다.
이 EVM 구성에는 50mA LDO(저손실) 레귤레이터가 포함되어 있습니다. 이 레귤레이터는 최대 50mA까지 공급할 수 있으며, 최대 24V, 과도 최대 30V로 입력 전압 범위(VIN)가 넓습니다. TPS715의 안정성을 위해 ESR(등가 직렬 저항)이 낮은 최소 0.47µF 이상의 유효 출력 커패시턴스를 사용하십시오.
UCD3138064AEVM149 — UCD3138064A 전원 컨버터 제어 카드 평가 모듈
UCD3138064AEVM149는 UCD3138ARGC 및 UCD3138064ARGC 디지털 전원 공급 장치 애플리케이션을 위한 제어 카드 역할을 하는 EVM 보드입니다. UCD3138064AEVM149는 UCD3138ARGC 및 UCD3138064ARGC 컨트롤러 장치를 연구하기 위한 독립형 제어 카드로 사용하거나 전력계 보드와 함께 작동하여 완전 조정된 전원 컨버터를 구현하는 DPWM 컨트롤러 보드로 사용할 수 있습니다.
PMP4320A — 텔레콤 애플리케이션을 위한 디지털 제어가 가능한 600W 하프 브릭 DC/DC 컨버터 레퍼런스 디자인
The PMP4320A reference design is a single output DC-DC converter with standard half-brick dimensions and full digital control configuration based on the UCD3138. It is capable of delivering 50A output current with an output voltage of 12V. The converter provides high efficiency and good (...)
TIDM-PSFB-DCDC — 위상 전환 풀 브리지 DC/DC 전원 컨버터 레퍼런스 디자인
이 설계는 디지털 방식으로 제어되는 위상 전환 풀 브리지 600W DC/DC 컨버터입니다. C2000™ Piccolo™ 마이크로컨트롤러는 피크 전류 모드 제어 및 동기 정류를 지원하는 위상 전환 풀 브리지 컨버터용 컨트롤러입니다. Piccolo 마이크로컨트롤러는 외부 지원 회로 없이 고성능 피크 전류 모드 제어를 구현하며, 이는 마이크로컨트롤러 기반 설계 중에서도 차별화된 기능입니다. 이 설계는 전체 부하 범위에서 ZVS 스위칭을 지원하면서 95% 이상의 피크 효율로 넓은 부하 범위에서 높은 효율을 달성할 수 (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VSON (DRB) | 8 | Ultra Librarian |
| WSON (DRV) | 6 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.