TPS65653-Q1
- AEC-Q100
qualified with the following results:
- Device temperature grade 1: –40°C to +125°C ambient operating temperature
- Input voltage: 2.8 V to 5.5 V
- Two high-efficiency step-down DC/DC converters:
- Output voltage: 1 V to 3.36 V
- Maximum output current 3 A
- Programmable output-voltage slew rate from 0.5 mV/µs to 10 mV/µs
- 4-MHz Switching frequency
- Spread-spectrum mode and phase interleaving for EMI reduction
- Configurable general-purpose output signals (GPO, GPO2)
- I2C-compatible interface supporting standard (100 kHz), fast (400 kHz), fast+ (1 MHz), and high-speed (3.4 MHz) modes
- Interrupt function with programmable masking
- Programmable power-good signal (PGOOD)
- External clock input to synchronize switching
- Output short-circuit and overload protection
- Overtemperature warning and protection
- Overvoltage protection (OVP) and undervoltage lockout (UVLO)
- 28-pin, 5-mm × 5-mm VQFN package with wettable flanks
The TPS65653-Q1 is designed to provide a tight power specification for noise sensitive applications, such as radar. The device contains two step-down DC/DC converters and general-purpose digital-output signals. The device is controlled by an I2C-compatible serial interface and by an enable signal.
The automatic PWM/PFM (AUTO mode) operation gives high efficiency over a wide output-current range. The TPS65653-Q1 supports remote voltage sensing to compensate IR drop between the regulator output and the point-of-load (POL) thus improving the accuracy of the output voltage. In addition the switching clock can be forced to PWM mode and also synchronized to an external clock to minimize the disturbances.
The TPS65653-Q1 device supports programmable start-up and shutdown delays and sequences including GPO signals synchronized to the enable signal. During start-up and voltage change, the device controls the output slew rate to minimize output voltage overshoot and the in-rush current.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | TPS65653-Q1 dual 3 A buck converters datasheet | PDF | HTML | 2018. 12. 13 | |
| * | 사용 설명서 | TPS6565342-Q1 Technical Reference Manual | PDF | HTML | 2019. 3. 25 | |
| 애플리케이션 노트 | TPS65313-Q1 and TPS65653-Q1 LDO free power solution for AWR1642/AWR1843 | 2020. 1. 27 |
설계 및 개발
전원 공급 솔루션
TPS65653-Q1을 포함하는 솔루션을 살펴보세요. TI는 칩(SoC), 프로세서, 마이크로컨트롤러, 센서 또는 FPGA(Field Programmable Gate Array)의 TI와 비TI 시스템을 위한 전원 공급 솔루션을 제공합니다.
TIPA-050050 — TPS65313-Q1 PMIC를 사용하는 AWR1843 및 AWR1642 전원 공급 장치 설계
이 전원 공급 장치 설계는 AWR1843 및 AWR1642 레이더 센서에 전원을 공급하는 최적화된 전력 관리 IC(PMIC)를 설명합니다. 이 기술 레퍼런스 매뉴얼은 TPS65313-Q1의 기본적으로 프로그래밍된 EEPROM 구성을 위한 레퍼런스로 사용됩니다. 이 문서는 TPS65313-Q1 PMIC 및 AWR18x/16x 레이더 장치와의 일반적인 연결을 보여줍니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN (RHD) | 28 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.