전력 관리 DC/DC 스위칭 레귤레이터 DC/DC 컨버터

TPS62866

활성

1.05mm x 1.78mm WCSP 패키지의 I2C 인터페이스를 지원하는 5.5V, 6A 동기 스텝다운 컨버터

제품 상세 정보

Rating Catalog Topology Buck, Step-Down Converter, Synchronous Buck Iout (max) (A) 6 Vin (max) (V) 5.5 Vin (min) (V) 2.5 Vout (max) (V) 1.675 Vout (min) (V) 0.4 Features Adaptive/Dynamic Voltage Scaling, Enable, Forced PWM, I2C/PMBus, Light Load Efficiency, Light load efficiency, Output discharge, Over Current Protection, Power good, Soft Start Fixed, Synchronous Rectification, UVLO Fixed, UVLO fixed, VID Interface EMI features Low parasitic Hotrod packaging Control mode COT, Constant on-time (COT), DCS-Control Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.000005 Duty cycle (max) (%) 100
Rating Catalog Topology Buck, Step-Down Converter, Synchronous Buck Iout (max) (A) 6 Vin (max) (V) 5.5 Vin (min) (V) 2.5 Vout (max) (V) 1.675 Vout (min) (V) 0.4 Features Adaptive/Dynamic Voltage Scaling, Enable, Forced PWM, I2C/PMBus, Light Load Efficiency, Light load efficiency, Output discharge, Over Current Protection, Power good, Soft Start Fixed, Synchronous Rectification, UVLO Fixed, UVLO fixed, VID Interface EMI features Low parasitic Hotrod packaging Control mode COT, Constant on-time (COT), DCS-Control Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.000005 Duty cycle (max) (%) 100
DSBGA (YCG) 15 1.8375 mm² (1.75 mm × 1.05 mm)
  • 7-mΩ and 6.5-mΩ internal power MOSFETs
  • >90% efficiency (0.9-V output)
  • DCS-control topology for fast transient response
  • 1% output voltage accuracy
  • 4-µA operating quiescent current
  • 2.4-V to 5.5-V input voltage range
  • 2.4-MHz switching frequency
  • Selection by external resistor
    • Start-up output voltage
    • I2C slave address
  • Selection by I2C interface
    • Power save mode or forced PWM mode
    • Output discharge
    • Hiccup or latching short-circuit protection
    • Output voltage ramp speed
  • VID pin for dynamic voltage scaling (DVS)
  • Thermal pre-warning and thermal shutdown
  • Power good indicator pin option
  • I2C-compatible interface up to 3.4 Mbps
  • Available in 1.05-mm x 1.78-mm x 0.5-mm 15-pin WCSP package with 0.35-mm pitch
  • Create a custom design using the TPS62866 with the WEBENCH® Power Designer
  • 7-mΩ and 6.5-mΩ internal power MOSFETs
  • >90% efficiency (0.9-V output)
  • DCS-control topology for fast transient response
  • 1% output voltage accuracy
  • 4-µA operating quiescent current
  • 2.4-V to 5.5-V input voltage range
  • 2.4-MHz switching frequency
  • Selection by external resistor
    • Start-up output voltage
    • I2C slave address
  • Selection by I2C interface
    • Power save mode or forced PWM mode
    • Output discharge
    • Hiccup or latching short-circuit protection
    • Output voltage ramp speed
  • VID pin for dynamic voltage scaling (DVS)
  • Thermal pre-warning and thermal shutdown
  • Power good indicator pin option
  • I2C-compatible interface up to 3.4 Mbps
  • Available in 1.05-mm x 1.78-mm x 0.5-mm 15-pin WCSP package with 0.35-mm pitch
  • Create a custom design using the TPS62866 with the WEBENCH® Power Designer

The TPS62864 and TPS62866 devices are high-frequency synchronous step-down converters with I2C interface which provide an efficient, adaptive, and high power-density solution. At medium to heavy loads, the converter operates in PWM mode and automatically enters Power Save Mode operation at light load to maintain high efficiency over the entire load current range. The device can also be forced in PWM mode operation for smallest output voltage ripple. Together with its DCS-control architecture, excellent load transient performance and tight output voltage accuracy are achieved. Via the I2C interface and a dedicated VID pin, the output voltage is quickly adjusted to adapt the power consumption of the load to the ever-changing performance needs of the application.

The TPS62864 and TPS62866 devices are high-frequency synchronous step-down converters with I2C interface which provide an efficient, adaptive, and high power-density solution. At medium to heavy loads, the converter operates in PWM mode and automatically enters Power Save Mode operation at light load to maintain high efficiency over the entire load current range. The device can also be forced in PWM mode operation for smallest output voltage ripple. Together with its DCS-control architecture, excellent load transient performance and tight output voltage accuracy are achieved. Via the I2C interface and a dedicated VID pin, the output voltage is quickly adjusted to adapt the power consumption of the load to the ever-changing performance needs of the application.

다운로드 스크립트와 함께 비디오 보기 비디오

관심 가지실만한 유사 제품

open-in-new 대안 비교
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능.
TPS62869 활성 1.5mm x 2.5mm QFN 패키지의 I²C 인터페이스를 지원하는 5.5V, 6A 동기 스텝다운 컨버터 QFN package alternative.
비교 대상 장치와 유사한 기능.
TPS62867 활성 1.5mm × 2.5mm QFN 패키지의 2.4V~5.5V 입력, 6A 동기 스텝다운 컨버터 DC/DC alternative in QFN with FB-pin.

기술 자료

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
12개 모두 보기
상위 문서 유형 직함 형식 옵션 최신 영어 버전 다운로드 날짜
* 데이터 시트 TPS62864/6 2.4-V to 5.5-V Input, 4-A and 6-A Synchronous Step-Down Converter with I2C Interface in WCSP Package datasheet (Rev. C) PDF | HTML 2020. 10. 1
애플리케이션 노트 Closed Loop Constant Power Drive to Simplify Heater Element Control and Extend Battery Life PDF | HTML 2025. 1. 29
애플리케이션 노트 Benefiting from Step-Down Converters with an I2C Communication Interface (Rev. B) PDF | HTML 2023. 11. 29
애플리케이션 노트 Intro to Multi-Function Pins and Their Applications in TI Step-Down Converters (Rev. A) PDF | HTML 2022. 11. 17
애플리케이션 노트 Understanding SOA Curves to Operate at High Output Currents and Temperature PDF | HTML 2022. 5. 5
선택 가이드 Buck Converter Quick Reference Guide (Rev. B) 2021. 4. 8
백서 Enabling Higher Data Rates for Optical Modules With Small and Efficient Power PDF | HTML 2021. 3. 22
애플리케이션 노트 Thermal Performance Optimization of High Power Density Buck Converters PDF | HTML 2021. 2. 23
인증서 TPS62866EVM-118 EU Declaration of Conformity (DoC) 2020. 6. 15
백서 Benefits of a Resistor-to-Digital Converter in Ultra-Low Power Supplies 2019. 10. 14
기술 문서 Layout matters: solving pinout assignment issues for DC/DC converters in WCSP pack PDF | HTML 2019. 7. 17
아날로그 디자인 학술지 Methods of output-voltage adjustment for DC/DC converters 2019. 6. 14

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

TPS62866EVM-051 — I2C 인터페이스가 있는 고전력 밀도 6A 스텝다운 컨버터 평가 모듈

TPS62866EVM-051 평가 모듈(EVM)은 0.5mm 피치의 1.05mm x 1.78mm WCSP 패키지의 TPS62866 6A 스텝다운 컨버터의 평가를 지원합니다. 이 EVM은 2.4V~5.5V의 입력 전압에서 1% 정확도로 I2C를 통해 0.4V~1.675V 프로그래머블 출력을 제공합니다. TPS62866은 FPGA, 카메라 모듈, SSD(솔리드 스테이트 드라이브)와 같은 공간 제약적인 애플리케이션용의 PoL(Point-of-Load) 컨버터를 위한 고효율의 높은 전력 밀도 솔루션입니다.

사용 설명서: PDF | HTML
지원되는 제품 및 하드웨어
재고 있음
제한:
??asset.out-of-stock-ti_ko_KR??
이용할 수 없음
평가 모듈(EVM)용 GUI

SLUC676 — TPS62866EVM GUI for Windows

지원되는 제품 및 하드웨어
평가 모듈(EVM)용 GUI

SLUC677 — TPS62866EVM GUI for MacOS

지원되는 제품 및 하드웨어
평가 모듈(EVM)용 GUI

SLUC678 — TPS62866EVM GUI for Linux

지원되는 제품 및 하드웨어
시뮬레이션 모델

TPS62864 PSpice Unencrypted Transient Model (Rev. B)

SLUM687B.ZIP (95 KB) - PSpice 모델
지원되는 제품 및 하드웨어
시뮬레이션 모델

TPS628640B PSpice Unencrypted Transient Model

SLUM742.ZIP (279 KB) - PSpice 모델
지원되는 제품 및 하드웨어
시뮬레이션 모델

TPS62866 PSpice Unencrypted Transient Model (Rev. B)

SLUM686B.ZIP (101 KB) - PSpice 모델
지원되는 제품 및 하드웨어
시뮬레이션 모델

TPS628660B PSpice Unencrypted Transient Model

SLUM741.ZIP (316 KB) - PSpice 모델
지원되는 제품 및 하드웨어
시뮬레이션 모델

TPS6286612 PSpice Transient Model

SLUM735.ZIP (107 KB) - PSpice 모델
지원되는 제품 및 하드웨어
패키지 CAD 기호, 풋프린트 및 3D 모델
DSBGA (YCG) 15 Ultra Librarian

주문 및 품질

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상