TPS6213013A-Q1
- DCS-Control™ topology
- Qualified for automotive applications
- Functional
Safety-Capable
- Documentation available to aid functional safety system design
- AEC-Q100 qualified with the following
results:
- Device temperature grade: –40°C to 125°C operating junction temperature range
- Device HBM ESD classification level 2
- Device CDM ESD classification level C4B
- Input voltage range: 3 to 17 V
- Adjustable output voltage from 0.9 to 6 V
- Pin-selectable output voltage (nominal, + 5%)
- Programmable soft start and tracking
- Seamless power save mode transition
- Quiescent current of 17 µA (typ.)
- Selectable operating frequency
- Power good output
- 100% Duty cycle mode
- Short circuit protection
- Overtemperature protection
- Pin-to-pin compatible with TPS62150A-Q1
- Available in a 3-mm × 3-mm, VQFN-16 package
- Create a custom design using the TPS62130A-Q1 with the WEBENCH® Power Designer
The TPS6213XA-Q1 devices are easy-to-use synchronous step-down DC-DC converters optimized for applications with high power density. A high switching frequency of typically 2.5 MHz allows the use of small inductors and provides fast transient response as well as high output-voltage accuracy through the use of the DCS-Control™ topology.
With a wide operating input-voltage range of 3 to 17 V, the devices are ideally suited for systems powered from intermediate bus power rails. The devices support up to 3-A continuous output current at output voltages between 0.9 V and 6 V (with 100% duty cycle mode). The output-voltage startup ramp is controlled by the soft-start pin, which allows operation as either a standalone power supply or in tracking configurations. Power sequencing is also possible by configuring the enable and open-drain power-good pins.
In power save mode, the devices show quiescent current of about 17 µA from VIN. Power save mode which is entered automatically and seamlessly if the load is small, maintains high efficiency over the entire load range. In shutdown mode, the devices are turned off and shutdown current consumption is less than 2 µA. The devices are packaged in a 16-pin VQFN package measuring 3 × 3 mm (RGT).
관심 가지실만한 유사 제품
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | TPS6213xA-Q1 3-V to 17-V 3-A Step-Down Converter With DCS Control datasheet (Rev. E) | 2020. 5. 26 | ||
| 애플리케이션 노트 | Comparison of TPS629xx-Q1 vs. TPS621x0A-Q1 | PDF | HTML | 2022. 12. 13 | ||
| 기능 안전 정보 | TPS6213x-Q1 Functional Safety FIT and Failure Mode Distribution | 2020. 1. 27 | |||
| 아날로그 디자인 학술지 | Methods of output-voltage adjustment for DC/DC converters | 2019. 6. 14 | |||
| 아날로그 디자인 학술지 | Understanding 100% mode in low-power DC/DC converters | 2018. 6. 22 | |||
| 아날로그 디자인 학술지 | Achieving a clean startup by using a DC/DC converter with a precise enable-pin threshold | 2017. 10. 24 | |||
| 아날로그 디자인 학술지 | Testing tips for applying external power to supply outputs without an input voltage | 2016. 10. 24 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPS62130EVM-505 — 3x3-mm, 16핀 QFN의 TPS62130 3A, 동기식 스텝다운 컨버터용 평가 모듈
- Related Terms:
- Synchronous Step Down DC-DC Converter
- DC to DC Step Down Converter
- Buck DC DC Converter
The TPS62130EVM-505 (HPA505-001) uses the TPS62130 adjustable version and is set to a 3.3-Voutput. The EVM operates with full-rated performance with an input voltage between 3.7 V and 17 V. (...)
SLVC780 — Design Tool for Output Voltage Adjustment Using a DAC
SLVC780 — Design Tool for Output Voltage Adjustment Using a DAC
TIDA-01412 — 게이트웨이 및 차체 제어 모듈의 오토모티브 마이크로컨트롤러를 위한 전원 공급 장치 레퍼런스 설계
이 개별 전원 공급 장치 레퍼런스 설계는 Freescale™ MPC5748G 마이크로컨트롤러의 성능을 보여줍니다. 이 레퍼런스 설계는 5개의 DC/DC 컨버터를 사용하며, PMIC를 사용할 때보다 더 유연하고 확장 가능한 설계를 제공합니다. 게이트웨이 및 중앙 차체 제어 모듈과 같은 다양한 차량용 애플리케이션을 지원합니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN (RGT) | 16 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.