TPS61181
- 5 V to 24 V Input Voltage
- Integrated 1.5 A 40 V MOSFET
- 1.0 MHz/1.3 MHz Switching Frequency
- Boost Output Auto-Adaptive to WLED Voltages
- Small External Components
- Integrated Loop Compensation
- Six Current Sink of 25 mA
- Up to 10 WLED in Series
- Less Than 3% Current Matching and Accuracy
- Up to 1000:1 PWM Brightness DImming Range
- Minimized Output Ripple Under PWM Dimming
- Driver for Input/Output Isolation PFET
- True Shutdown
- Over Voltage Protection
- WLED Open/Short Protection
- Built-in Soft Start
- 16L 3 mm×3 mm QFN
The TPS61180/1/2 ICs provide highly integrated solutions for media size LCD backlight. These devices have a built-in high efficiency boost regulator with integrated 1.5A/40V power MOSFET. The six current sink regulators provide high precision current regulation and matching. In total, the device can support up to 60 WLED. In addition, the boost output automatically adjusts its voltage to the WLED forward voltage to improve efficiency.
The devices support pulse width modulation (PWM) brightness dimming. During dimming, the WLED current is turned on/off at the duty cycle and frequency determined by the PWM signal input on the DCRTL pin. One potential issue of PWM dimming is audible noises from the output ceramic capacitors. The TPS61180/1/2 family is designed to minimize this output AC ripple across a wide dimming duty cycle and frequency range; therefore, reducing the audible noise.
The TPS61180/1/2 ICs provide a driver output for an external PFET connected between the input and inductor. During short circuit or over-current conditions, the ICs turn off the external PFET and disconnect the battery from the WLEDs. The PFET is also turned off during IC shutdown (true shutdown) to prevent any leakage current of the battery. The device also integrates over-voltage protection, soft-start and thermal shutdown.
The TPS61180 IC requires external 3.3V IC supply, while TPS61181 and TPS61182 ICs have a built-in linear regulator for the IC supply. All the devices are in a 3×3 mm QFN package.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | WLED DRIVER FOR NOTEBOOK DISPLAY. datasheet (Rev. E) | 2013. 4. 11 | ||
| 백서 | Common LED Functions and LED Driver Design Considerations | 2020. 9. 21 | |||
| 애플리케이션 노트 | Some Guidelines and Tips for the LED Driver Application | 2019. 8. 14 | |||
| 애플리케이션 노트 | Performing Accurate PFM Mode Efficiency Measurements (Rev. A) | 2018. 12. 11 | |||
| 애플리케이션 노트 | Optimizing Transient Response of Internally Compensated DC-DC Converters (Rev. B) | 2017. 11. 29 | |||
| 애플리케이션 노트 | Extending the Soft Start Time Without a Soft Start Pin (Rev. B) | 2017. 6. 15 | |||
| 애플리케이션 노트 | Analog Dimming with the TPS61181 | 2011. 11. 8 | |||
| 애플리케이션 노트 | TPS61181 One-Cell Battery Application for Tablet PC Backlight | 2010. 9. 9 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
SN65DSI83Q1-EVM — MIPI® DSI부터 LVDS 브리지 및 FlatLink™ 통합 회로 평가 모듈
SN65DSI85Q1-EVM — 듀얼 채널 MIPI® DSI-to-듀얼 링크 FlatLink™ LVDS 브리지 평가 모듈
TPS61181EVM-259 — TPS61181EVM-259 평가 모듈
The TPS61181EVM-259 facilitates evaluation of the TPS61181 1.5 A White LED Driver for Notebooks. This IC provides a highly integrated solution for media size LCD backlight. The device has a built-in high efficiency boost regulator with integrated 1.5 A/40 V power MOSFET.
WLEDEVM-260 — WLEDEVM-260 평가 모듈
The WLEDEVM-260 load board contains 8 white light emitting diode (WLED) banks/strings which contain either 10 or 12 WLEDs as selected by the odd numbered jumpers (JP1, JP3, etc.). It is used with the TPS61181EVM-259 or TPS61182EVM-259 Evaluation Module to demonstrate functionality of the (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| WQFN (RTE) | 16 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.