전력 관리 DC/DC 스위칭 레귤레이터 DC/DC 컨버터

TPS61045

활성

QFN-8, 디지털 조정 가능 28V, 85% 효율 부스트 컨버터

제품 상세 정보

Rating Catalog Topology Boost Vin (max) (V) 6 Vin (min) (V) 1.8 Vout (max) (V) 28 Vout (min) (V) 1.8 Switch current limit (typ) (A) 0.3 Features Enable, Load Disconnect, Nonsynchronous Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.00004 Duty cycle (max) (%) 88
Rating Catalog Topology Boost Vin (max) (V) 6 Vin (min) (V) 1.8 Vout (max) (V) 28 Vout (min) (V) 1.8 Switch current limit (typ) (A) 0.3 Features Enable, Load Disconnect, Nonsynchronous Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.00004 Duty cycle (max) (%) 88
VSON (DRB) 8 9 mm² (3 mm × 3 mm)
  • Input Voltage Range from 1.8 to 6 V
  • Output Voltage of up to 28 V Possible
  • Up to 85% Efficiency
  • Digitally Adjustable Output Voltage Control
  • Disconnects Output From Input During Shutdown
  • Switching Frequency up to 1 MHz
  • No Load Quiescent Current 40 µA Typical
  • Thermal Shutdown Mode
  • Shutdown Current 0.1 µA Typical
  • Available in Small 3-mm × 3-mm VSON Package
  • Input Voltage Range from 1.8 to 6 V
  • Output Voltage of up to 28 V Possible
  • Up to 85% Efficiency
  • Digitally Adjustable Output Voltage Control
  • Disconnects Output From Input During Shutdown
  • Switching Frequency up to 1 MHz
  • No Load Quiescent Current 40 µA Typical
  • Thermal Shutdown Mode
  • Shutdown Current 0.1 µA Typical
  • Available in Small 3-mm × 3-mm VSON Package

The TPS61045 device is a high-frequency boost converter with digitally-programmable output voltage and true shutdown. During shutdown, the output is disconnected from the input by opening the internal input switch. This allows a controlled power-up and power-down sequencing of the display. The output voltage can be increased or decreased in digital steps by applying a logic signal to the CTRL pin. The output voltage range, as well as the output voltage step size, can be programmed with the feedback divider network. With a high switching frequency of up to 1 MHz, the TPS61045 device allows the use of small external components, and together, with the small 8-pin VSON package, a minimum system solution size is achieved.

The TPS61045 device is a high-frequency boost converter with digitally-programmable output voltage and true shutdown. During shutdown, the output is disconnected from the input by opening the internal input switch. This allows a controlled power-up and power-down sequencing of the display. The output voltage can be increased or decreased in digital steps by applying a logic signal to the CTRL pin. The output voltage range, as well as the output voltage step size, can be programmed with the feedback divider network. With a high switching frequency of up to 1 MHz, the TPS61045 device allows the use of small external components, and together, with the small 8-pin VSON package, a minimum system solution size is achieved.

다운로드 스크립트와 함께 비디오 보기 비디오

관심 가지실만한 유사 제품

open-in-new 대안 비교
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능.
TPS61376 활성 25V, 4.5A, 부스트 컨버터, 2.5% 정확도 입력 평균 전류 제한 및 실제 분리 TPS61376 has adjustable input current limited and true disconnection feature
비교 대상 장치와 유사한 기능.
TPS61046 활성 WCSP 패키지의 28V 출력 전압 부스트 컨버터 For applications requiring smaller package or true disconnection.

기술 자료

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
12개 모두 보기
상위 문서 유형 직함 형식 옵션 최신 영어 버전 다운로드 날짜
* 데이터 시트 TPS61045 Digitally Adjustable Boost Converter datasheet (Rev. C) PDF | HTML 2014. 12. 5
애플리케이션 노트 QFN and SON PCB Attachment (Rev. C) PDF | HTML 2023. 12. 6
애플리케이션 노트 Using External Bias to Broaden Input Voltage Range of Boost Converters PDF | HTML 2021. 11. 8
애플리케이션 노트 Performing Accurate PFM Mode Efficiency Measurements (Rev. A) 2018. 12. 11
선택 가이드 Power Management Guide 2018 (Rev. R) 2018. 6. 25
애플리케이션 노트 Optimizing Transient Response of Internally Compensated DC-DC Converters (Rev. B) 2017. 11. 29
애플리케이션 노트 Extending the Soft Start Time Without a Soft Start Pin (Rev. B) 2017. 6. 15
애플리케이션 노트 Feedforward Capacitor Makes Boost Converter Fast and Stable 2016. 11. 2
아날로그 디자인 학술지 Design considerations for a resistive feedback divider in a DC/DC converter 2012. 4. 26
아날로그 디자인 학술지 IQ: What it is, what it isn’t, and how to use it 2011. 6. 17
애플리케이션 노트 Minimizing Ringing at the Switch Node of a Boost Converter 2006. 9. 15
애플리케이션 노트 High Voltage Power Supply Using the TPS61040 2002. 7. 9

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

TPS61045EVM-231 — TPS61045 평가 모듈

The TPS61045EVM-231 is an evaluation tool for the TPS61045 inductive boost converter in 3x3mm2 QFN that can supply voltages up to 28V from input voltages in the range of 1.8V to 6V. The EVM is configured to supply a highly efficient, digitally adjustable, 18-V output for LCD bias supplies. This EVM (...)

사용 설명서: PDF
지원되는 제품 및 하드웨어
재고 있음
제한:
??asset.out-of-stock-ti_ko_KR??
이용할 수 없음
시뮬레이션 모델

TPS61045 Macromodels Transient

SLVMD16.ZIP (92 KB) - SIMPLIS 모델
지원되는 제품 및 하드웨어
시뮬레이션 모델

TPS61045 Unencrypted PSpice Transient Model Package (Rev. A)

SLVM359A.ZIP (41 KB) - PSpice 모델
지원되는 제품 및 하드웨어
패키지 CAD 기호, 풋프린트 및 3D 모델
VSON (DRB) 8 Ultra Librarian

주문 및 품질

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상