TPS61023
- Input voltage range: 0.5 V to 5.5 V
- 1.8-V Minimum input voltage for start-up
- Output voltage setting range: 2.2 V to 5.5 V
- Two 47-mΩ (LS) / 68-mΩ (HS) MOSFETs
- 3.7-A Valley switching current limit
- 94% Efficiency at VIN = 3.6 V, VOUT = 5 V and IOUT = 1.5 A
- 1-MHz Switching frequency when VIN > 1.5 V and 0.5-MHz switching frequency when VIN < 1 V
- Typical 0.1-µA shutdown current from VIN and SW
- ±2.5% Reference voltage accuracy over –40°C to +125°C
- Auto PFM operation mode at light load
- Pass-through mode when VIN > VOUT
- True disconnection between input and output during shutdown
- Output overvoltage and thermal shutdown protections
- Output short-circuit protection
- 1.2-mm × 1.6-mm SOT563 (DRL) 6-pin package
TPS61023 device is a synchronous boost converter with 0.5-V ultra-low input voltage. The device provides a power supply solution for portable equipment and smart devices powered by various batteries and super capacitors. The TPS61023 has typical 3.7-A valley switch current limit over full temperature range. With a wide input voltage range of 0.5 V to 5.5 V, the TPS61023 supports super capacitor backup power applications, which may deeply discharge the super capacitor.
The TPS61023 operates at 1-MHz switching frequency when the input voltage is above 1.5 V. The switching frequency decreases gradually to 0.5 MHz when the input voltage is below 1.5 V down to 1 V. The TPS61023 enters power-save mode at light load condition to maintain high efficiency over the entire load current range. The TPS61023 consumes a 20-µA quiescent current from VOUT in light load condition. During shutdown, the TPS61023 is completely disconnected from the input power and only consumes a 0.1-µA current to achieve long battery life. The TPS61023 has 5.7-V output overvoltage protection, output short circuit protection, and thermal shutdown protection.
The TPS61023 offers a very small solution size with 1.2-mm × 1.6-mm SOT563 (DRL) package and minimum amount of external components.
관심 가지실만한 유사 제품
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | TPS61023 3.7-A Boost Converter with 0.5-V Ultra-low Input Voltage datasheet (Rev. B) | PDF | HTML | 2020. 8. 18 | |
| 애플리케이션 노트 | Hysteresis Control MPPT Method with Generic DC/DC Converter | PDF | HTML | 2024. 6. 21 | ||
| 애플리케이션 노트 | TPS61022 및 TPS61023에 사용되는 조정 가능한 부족 전압 록아웃 회로 (Rev. A) | PDF | HTML | Download English Version (Rev.A) | 2022. 11. 21 | |
| 애플리케이션 노트 | Measuring and Understanding the Output Voltage Ripple of a Boost Converter | PDF | HTML | 2021. 2. 22 | ||
| 애플리케이션 노트 | Designing a Low-Cost, High-Accuracy Infrared Thermometer | 2020. 11. 25 | |||
| 기술 문서 | Accelerate your electric mask design | PDF | HTML | 2020. 7. 1 | ||
| 애플리케이션 노트 | TPS61022 and TPS61023 Boost Converters Layout Guidelines | 2020. 5. 20 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPS61023EVM-052 — TPS61023DRL 평가 모듈
TPS61023은 초저입력 전압을 지원하는 3A 부스트 컨버터입니다. 이 장치는 0.5V~5.5V의 입력 전압 범위 및 2.2V~5.5V의 조정 가능한 출력 전압을 지원하며 최소 3A 밸리 스위치 전류 제한이 있습니다.
TPS61023EVM-052는 출력 전압을 5V로 설정한 TPS61023용 평가 모듈(EVM)입니다.
SLVC803 — TPS61023 Calculation Tool
TIDA-010261 — 데이터 라인을 통한 전원을 지원하는 10BASE-T1L 싱글 페어 이더넷 센서 레퍼런스 설계
이 레퍼런스 설계에서는 PoDL(Power over Data Line)을 포함한 싱글 페어 이더넷(SPE) 통신 백 엔드의 구현을 보여줍니다. 이 설계는 한 쪽의 아날로그 프론트 엔드와 다른 쪽의 이더넷 물리적(PHY) 계층을 인터페이싱하는 Sitara™ AM2434 MCU를 사용합니다. 강력한 MCU를 사용하면 센서 데이터를 이더넷에 전달할 뿐만 아니라 에지에서 데이터 처리를 수행할 수도 있습니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOT-5X3 (DRL) | 6 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.