TPS60403
- Inverts Input Supply Voltage
- Up to 60-mA Output Current
- Only Three Small 1-µF Ceramic Capacitors Needed
- Input Voltage Range From 1.6 V to 5.5 V
- PowerSave-Mode for Improved Efficiency at Low-Output Currents (TPS60400)
- Device Quiescent Current Typical 65 µA
- Integrated Active Schottky-Diode for Start-up Into Load
- Small 5-Pin SOT-23 Package
- Evaluation Module Available TPS60400EVM-178
The TPS6040x family of devices generates an unregulated negative output voltage from an input voltage ranging from 1.6 V to 5.5 V. The devices are typically supplied by a preregulated supply rail of 5 V or 3.3 V. Due to its wide input voltage range, two or three NiCd, NiMH, or alkaline battery cells, as well as one Li-Ion cell can also power them.
Only three external 1-µF capacitors are required to build a complete DC-DC charge pump inverter. Assembled in a 5-pin SOT-23 package, the complete converter can be built on a 50-mm2 board area. Additional board area and component count reduction is achieved by replacing the Schottky diode that is typically needed for start-up into load by integrated circuitry.
The TPS6040x can deliver a maximum output current of 60 mA with a typical conversion efficiency of greater than 90% over a wide output current range. Three device options with 20-kHz, 50-kHz, and 250-kHz fixed-frequency operation are available. TPS60400 comes with a variable switching frequency to reduce operating current in applications with a wide load range and enables the design with low-value capacitors.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 | |
|---|---|---|---|---|---|---|
| * | 데이터 시트 | TPS6040x Unregulated 60-mA Charge Pump Voltage Inverter datasheet (Rev. C) | PDF | HTML | 2020. 11. 10 | ||
| 애플리케이션 노트 | Quick Reference Guide To TI Buck Switching DC/DC Application Notes (Rev. B) | PDF | HTML | 2022. 5. 23 | |||
| 애플리케이션 노트 | Performing Accurate PFM Mode Efficiency Measurements (Rev. A) | 2018. 12. 11 | ||||
| 선택 가이드 | Power Management Guide 2018 (Rev. R) | 2018. 6. 25 | ||||
| 애플리케이션 노트 | Extending the Soft Start Time Without a Soft Start Pin (Rev. B) | 2017. 6. 15 | ||||
| 아날로그 디자인 학술지 | Design considerations for a resistive feedback divider in a DC/DC converter | 2012. 4. 26 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPS60400EVM-178 — 충전 펌프 인버터(베어 PCB)용 평가 모듈
Need for use: The EVM does not contain any components. The pcb therefore first has to be populated with the appropriate components. A description of different applications that can be tested using the EVM can be found in the TPS60400EVM users guide. Samples of the TPS6040x family can be (...)
TIDA-00777 — 릴레이 및 차단기의 정확도가 향상된 Rogowski 코일용 액티브 통합기 레퍼런스 디자인
TIDA-00799 — 저잡음, 저왜곡 및 DC와 AC 입력을 지원하는 쿼드 채널 12비트 50MSPS ADC 레퍼런스 디자인
TIDA-00810 — 델타-시그마 칩 진단을 사용하여 보호 릴레이에서 AC 전압 및 전류를 측정하는 레퍼런스 디자인
TIDA-00810 레퍼런스 디자인은 아날로그 입력 성능을 정확하게 측정하고 칩 진단을 포함하여 매우 정확한 AC 전압 및 전류 측정 AFE(아날로그 프런트 엔드)와 넓은 동적 범위에서 측정을 위한 4채널 24비트 동시 샘플링 차동 입력 델타-시그마 ADC를 사용하여 전원 시스템 오류를 조기에 식별하는 데 도움이 되는 칩 진단을 포함합니다. ADC는 0-5V 단극을 측정하도록 구성됩니다. 입력은 2.5V DC 출력 레벨 전환을 지원하는 고정 게인 증폭기를 사용하여 ADC 측정 범위로 확장됩니다. AFE는 전류 변압기, 아날로그 (...)
TIDA-00835 — 24비트 델타 시그마 ADC를 사용한 고정밀 ±0.5% 전류 및 절연 전압 측정 레퍼런스 디자인
TIDA-00835 레퍼런스 설계는 넓은 동적 범위에 걸쳐 4채널, 24비트 동시 샘플링 차동 입력 델타-시그마 ADC를 통합하여 양극 입력 구성을 사용하여 정확한 전압 및 전류 측정을 지원합니다. ADC는 ±2.5V 양극 입력을 측정하도록 구성됩니다. 입력은 고정 게인 증폭기를 사용하여 ±2.5V의 ADC 측정 범위로 확장됩니다. 이 AFE는 공통 외부 클록을 사용하여 두 개의 ADC를 함께 체인으로 연결하여 입력 채널 수를 8개로 확장하면서 모든 입력 채널을 동시에 샘플링합니다. 모듈당 측정 채널이 더 많이 있으면 전체 (...)
TIDA-00942 — 디지타이저용 12비트 20MSPS 데이터 수집 레퍼런스 디자인
이 레퍼런스 설계는 FPGA 기반 시스템에 대한 대안을 제공하는 비용 효율적인 저전력 데이터 수집 시스템을 구현합니다. 이것은 휴대용 계기 및 디지타이저를 포함한 다양한 애플리케이션에 사용할 수 있는 단일 종단, 고임피던스 입력을 제공합니다.
이 레퍼런스 설계는 OPA656 및 THS4541 연산 증폭기(연산 증폭기)와 함께 ADS4122 ADC(아날로그-디지털 컨버터)를 활용하여 BeagleBone 케이프 폼 팩터용 12비트, 20MSPS 디지타이저를 개발합니다. 이 레퍼런스 설계에서 개발된 확장 보드는 ARM Cortex-A8 (...)
TIDA-01214 — 16비트 ADC 및 디지털 아이솔레이터를 사용하는 절연, 고정밀 아날로그 입력 모듈 레퍼런스 디자인
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOT-23 (DBV) | 5 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.