TPS60150
- 2.7V to 5.5V input voltage range
- 5V fixed output voltage
- 140mA maximum output current
- 1.5MHz switching frequency
- Typical 90µA quiescent current at no load condition (skip mode)
- X2 charge pump
- Hardware enable and disable function
- Built-in soft start
- Built-in undervoltage lockout protection
- Thermal and overcurrent protection
- Available in a 2mm × 2mm 6-pin SON package with 0.8mm height
The TPS60150 device is a switched capacitor voltage converter that produces a regulated, low noise, and low-ripple output voltage of 5V from an unregulated input voltage.
The 5V output can supply a minimum of 140mA current.
The TPS60150 device operates in skip mode when the load current falls less than 8mA under typical condition. In skip mode operation, quiescent current is reduced to 90µA.
Only three external capacitors are needed to generate the output voltage, therefore saving PCB space.
Inrush current is limited by the soft-start function during power on and power transient states.
The TPS60150 device operates over a free-air temperature range of –40°C to 85°C. The device is available with a small 2mm × 2mm 6-pin SON package (QFN).
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | TPS60150 5V, 140mA Charge-Pump datasheet (Rev. D) | PDF | HTML | 2026. 4. 27 | |
| 애플리케이션 노트 | QFN and SON PCB Attachment (Rev. C) | PDF | HTML | 2023. 12. 6 | ||
| 애플리케이션 노트 | Performing Accurate PFM Mode Efficiency Measurements (Rev. A) | 2018. 12. 11 | |||
| 선택 가이드 | Power Management Guide 2018 (Rev. R) | 2018. 6. 25 | |||
| 애플리케이션 노트 | Extending the Soft Start Time Without a Soft Start Pin (Rev. B) | 2017. 6. 15 | |||
| 기술 문서 | How to overcome automotive front-end design challenges | PDF | HTML | 2015. 9. 10 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPS60150EVM-359 — TPS60150EVM-359 평가 모듈
The TPS60150EVM-359 facilitates evaluation of the TPS60150 150mA Charge Pump.
PMP10652 — 차량에 필요한 모든 보호 기능을 갖춘 30W ADAS 시스템을 위한 시스템 수준 레퍼런스 디자인
PMP10652 is a System optimized (CISPR 25 Class 3) 30W design for Surround View ADAS system.
The design has various protections such as Load dump through TVS (ISO pulse testing), Reverse Voltage (Innovative Smart diode with very low Iq), Battery Disconnect Switch with OVP protection (PFET) and is EMI (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| WSON (DRV) | 6 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.