TPS563201
- TPS563201 and TPS563208 3A converter integrated 95mΩ and 57mΩ FETs
- D-CAP2™ control scheme with fast transient response
- Input voltage range: 4.5V to 17V
- Output voltage range: 0.76V to 7V
- Pulse-skip mode (TPS563201) or continuous current mode (TPS563208)
- 580kHz switching frequency
- Low shutdown current less than 20µA
- 2% feedback voltage accuracy (25°C)
- Startup from prebiased output voltage
- Cycle-by-cycle overcurrent limit
- Hiccup-mode overcurrent protection
- Non-latch UVP and TSD protections
- Fixed soft start: 1.0ms
- Create a custom design using the TPS56320x with the WEBENCH Power Designer
The TPS563201 and TPS563208 are simple, easy-to-use, 3A synchronous step-down converters in SOT-23 package.
The devices are designed to operate with minimum external component counts and also designed to achieve low standby current.
These switch mode power supply (SMPS) devices employ D-CAP2 control scheme providing a fast transient response and supporting both low equivalent series resistance (ESR) output capacitors such as specialty polymer and ultra-low ESR ceramic capacitors with no external compensation components.
The TPS563201 operates in pulse skip mode, which maintains high efficiency during light load operation. The TPS563201 and TPS563208 are available in a 6-pin 1.6mm × 2.9mm SOT (DDC) package, and specified from a –40°C to 125°C junction temperature.
관심 가지실만한 유사 제품
비교 대상 장치보다 업그레이드된 기능을 지원하는 즉각적 대체품.
기술 자료
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPS563201EVM-715 — 3A, SWIFT 스텝다운 전압 컨버터 평가 모듈
The TPS563201 is a single, adaptive on-time, D-CAP2™ mode, synchronous buck converter requiring a very low external component count. The D-CAP2 control circuit is optimized for low-ESR output capacitors such as POSCAP, SP-CAP, or ceramic types and features fast transient response with no (...)
TPS563201 Unencrypted PSpice Transient Model Package (Rev. B)
PMP21065 — 셋톱 박스용 초저 대기 전력, 고효율, DC-DC 전원 공급 장치 레퍼런스 설계
PMP21065 레퍼런스 설계는 일반 12V DC 입력 전압에서 작동하여 요즘 셋톱 박스에서 쓰이는 몇 가지 일반적인 레일을 생성합니다. 이 설계의 주된 목표는 저비용, 작은 크기, 낮은 대기 전력에 우수한 효율을 달성하여 고객이 STB 소비 전력에 대한 새로운 규제 가이드라인을 준수하도록 돕는 것입니다.
TIDA-01635 — 90Hz 재생률의 가상/증강 현실 디스플레이를 위한 백라이트 및 LCD 바이어스 레퍼런스 설계
이 레퍼런스 설계는 웨어러블 디바이스의 LCD 디스플레이를 위한 전원 솔루션, 특히 AR(증강 현실) 및 VR(가상 현실) 헤드셋에 대해 설명합니다. LP8556으로 고전류 정확도의 백라이트 드라이버를 달성하여 작은 듀티 사이클에서 고전류를 제공하고 주사율과 동기화합니다. LCD 바이어스 전원 드라이버는 사용이 간편하고 작은 패키지가 포함된 TPS65132에서 제공합니다. 자세한 설계 이론, 구성 요소 선택 및 테스트 결과도 설명합니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOT-23-THN (DDC) | 6 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.