TPS55289-Q1
- AEC-Q100 qualified:
- Device temperature grade 1: –40°C to +125°C ambient operating temperature range
- Functional Safety-Capable
- Programmable power supply (PPS) support for USB
power delivery (USB PD)
- Wide input voltage range: 3.0V to 36V
- Programmable output voltage range: 0.8V to 22V with 10mV step
- ±1% reference voltage accuracy
- Adjustable output voltage compensation for voltage droop over the cable
- Programmable output current limit up to 6.35A with 50mA step
- ±5% accurate output current monitoring
- I2C interface
- High efficiency over entire load range
- 96% efficiency at VIN = 12V, VOUT = 20V and IOUT = 3A
- Programmable PFM and FPWM mode at light load
- Avoid frequency interference and crosstalk
- Optional clock synchronization
- Programmable switching frequency from 200kHz to 2.2MHz
- EMI mitigation
- Optional programmable spread spectrum
- Lead-less package
- Rich protection features
- Output overvoltage protection
- Hiccup mode for output short-circuit protection
- Thermal shutdown protection
- 8A average inductor current limit
- Small solution size
- Maximum switching frequency up to 2.2MHz
- 3.0mm × 5.0mm HotRod™ QFN package
The TPS55289-Q1 is a synchronous buck-boost converter that is optimized for converting battery voltage or adapter voltage into power supply rails. The TPS55289-Q1 integrates four MOSFET switches providing a compact solution for USB Power Delivery (USB PD) application.
The TPS55289-Q1 has up to 36V input voltage capability. Through the I2C interface, the output voltage of the TPS55289-Q1 can be programmed from 0.8V to 22V with 10mV step. When working in boost mode, it can deliver 60W from a 12V input voltage. It is capable of delivering 45W from 9V input voltage.
The TPS55289-Q1 employs an average current-mode control scheme. The switching frequency is programmable from 200kHz to 2.2MHz by an external resistor and can be synchronized to an external clock. The TPS55289-Q1 also provides optional spread spectrum to minimize peak EMI.
The TPS55289-Q1 offers output over-voltage protection, average inductor current limit, cycle-by-cycle peak current limit and output short circuit protection. The TPS55289-Q1 also ensures safe operating with optional output current limit and hiccup-mode protection in sustained overload conditions.
The TPS55289-Q1 can use a small inductor and small capacitors with high switching frequency. It is available in a 3.0mm × 5.0mm QFN package.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | TPS55289-Q1 36V, 8A Buck-Boost Converter with I2 C Interface datasheet | PDF | HTML | 2023. 12. 11 | |
| 애플리케이션 노트 | E-Latch with 5S SuperCaps Solution Used Buck-Boost Converter | PDF | HTML | 2026. 6. 2 | ||
| 기능 안전 정보 | TPS55289-Q1 Functional Safety FIT Rate, FMD and Pin FMA | PDF | HTML | 2023. 12. 1 | ||
| 인증서 | TPS55289Q1EVM EU Declaration of Conformity (DoC) | PDF | HTML | 2023. 11. 8 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPS55289EVM — 36V, 8A/4A, I²C 완전 통합 벅-부스트 컨버터용 TPS55289 평가 모듈
TPS55289는 배터리 전압 또는 어댑터 전압을 전원 공급 레일로 변환하는 데 최적화된 동기 벅-부스트 컨버터입니다. TPS55289는 USB PD(Power Delivery) 애플리케이션을 위한 소형 솔루션을 제공하는 네 개의 MOSFET 스위치를 통합합니다.
TPS55289Q1EVM — TPS55289-Q1 평가 모듈
PMP41092 — CISPR 25 클래스 5, 400kHz 정격, 60W 차량용 듀얼 USB Type-C® 및 USB PD 충전기 레퍼런스 디자인
이 레퍼런스 디자인은 포트당 45W의 최대 전력을 공급하는 듀얼 USB Type-C ® PD(전력 공급)를 위한 60W 차량용 충전기입니다. TPS25772-Q1은 벅-부스트 레귤레이터가 있는 듀얼 USB 타입 C PD 컨트롤러로 사용됩니다. TPS55289-Q1은 다른 포트의 벅-부스트 레귤레이터로 사용됩니다. 보드 최대 효율은 95.3%입니다. 이 보드는 엄격한 CISPR 25 클래스 5 전도 및 방사 전자기 간섭(EMI)을 준수합니다. 이 보드는 45mm x 45mm의 소형 폼 팩터를 지원합니다.
PMP41094 — CISPR 25 클래스 5, 400kHz 정격, 90W 차량용 듀얼 USB Type-C® 및 USB PD 충전기 레퍼런스 디자인
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN-HR (RYQ) | 21 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.