TPS544C27
- Single chip power supply for SVID rails
- Intel VR14 and VR13 compliant
- VR14.Cloud compliant with telemetry level 2 and security level 2
- PMBus 1.5 interface with NVM for configuration, telemetry (V/I/T) and fault reporting
- Input voltage: 4V to 18V
- Output voltage: 0.25V to 5.5V
- Supports external 5V bias improving efficiency and enabling 2.7V minimum input voltage
- Output current: 35A continuous and 40A peak
- Cycle-by-cycle valley IOUT OCF limit programmable up to 40A
- Input power monitoring (PIN sense)
- Programmable DCM or FCCM operation
- Switching frequency: 400kHz to 2MHz
- Programmable internal loop compensation including droop (DC Load Line)
- Programmable soft-start time from 0.5ms to 16ms
- Programmable soft-stop time from 0.5ms to 4ms
- Programmable output voltage slew rate: 0.625mV/µs to 25mV/µs
- Programmable VIN UVLO, VOUT OVF/UVF, and OTF
- Safe start-up into prebiased outputs
- Precision voltage reference and
differential remote sense for high output accuracy
- ±0.5% tolerance from 0°C to 85°C junction
- ±1% tolerance from –40°C to 125°C junction
- Analog output current output pin (IMON)
- D-CAP+™ control topology with fast transient response
- Open-drain power-good output (VRRDY)
The TPS544C27 device is highly integrated buck converter with D-CAP+ control topology for fast transient response. All programmable parameters can be configured by the PMBus interface and stored in non-volatile memory (NVM) as the new default values to minimize the external component count. These features make the device well-designed for space-constrained applications.
The TPS544C27 device is designed to work with Intel CPUs and fits well for single-phase, low-to-mid current SVID rails in the Intel server and SoC platforms requiring VR13, VR14, or VR14.Cloud compliance.
Fault management and status reports for the overcurrent fault (OCF), VOUT overvoltage fault (OVF), undervoltage fault (UVF), and overtemperature fault are provided on the device. The TPS544C27 device provides a full set of telemetry, including output voltage, output current, and device temperature.
TPS544C27 is a lead-free device and is RoHS compliant without exemption.
추가 정보 요청
전체 데이터시트 및 기타 정보가 제공됩니다. 지금 요청
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | TPS544C27 4V to 18 V Input, 35 A, Buck Converter With SVID and PMBus® datasheet | PDF | HTML | 2024. 7. 31 | |
| 애플리케이션 노트 | Point-of-Load Designs in Data Center Applications for Intel Xeon Sapphire Rapids Scalable Processors (Rev. C) | PDF | HTML | 2024. 10. 9 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPS544C27EVM — TPS544C27 평가 모듈
USB-TO-GPIO2 — USB-TO-GPIO2 USB 인터페이스 어댑터 평가 모듈
FUSION_DIGITAL_POWER_DESIGNER — 디지털 전원 소프트웨어
Fusion Digital Power™ GUI(그래픽 사용자 인터페이스) 소프트웨어는 선별된 텍사스 인스트루먼트 디지털 전원 컨트롤러 및 시퀀서/상태 모니터를 구성하고 모니터링하는 데 사용됩니다. 이 애플리케이션은 PMBus 프로토콜을 사용하여 TI USB 어댑터를 경유, 직렬 버스를 통해 장치와 통신합니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| WQFN-FCRLF (VBD) | 33 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.