TPS54429E
- D-CAP2™ Mode Enables Fast Transient Response
- Low Output Ripple and Allows Ceramic Output Capacitor
- Wide VIN Input Voltage Range: 7 V to 18 V
- Output Voltage Range: 0.76 V to 5.5 V
- Highly Efficient Integrated FET’s Optimized
for Lower Duty Cycle Applications
– 63 mΩ (High Side) and 55 mΩ (Low Side) - High Efficiency, less than 10 µA at shutdown
- High Initial Bandgap Reference Accuracy
- Adjustable Soft Start
- Pre-Biased Soft Start
- 700-kHz Switching Frequency (fSW)
- Cycle By Cycle Over Current Limit
- Power Good Output
- Auto-Skip Eco-mode for High Efficiency at Light Load
- APPLICATIONS
- Wide Range of Applications for Low Voltage System
- Digital TV Power Supply
- High Definition Blu-ray Disc™ Players
- Networking Home Terminal
- Digital Set Top Box (STB)
- Wide Range of Applications for Low Voltage System
All trademarks are the property of their respective owners.
The TPS54429E is an adaptive on-time D-CAP2™ mode synchronous buck converter. The TPS54429E enables system designers to complete the suite of various end equipment’s power bus regulators with a cost effective, low component count, low standby current solution. The main control loop for the TPS54429E uses the D-CAP2™ mode control which provides a very fast transient response with no external compensation components. The adaptive on-time control supports seamless transition between PWM mode at higher load conditions and Eco-mode™ operation at light loads. Eco-mode™ allows the TPS54429E to maintain high efficiency during lighter load conditions. The TPS54429E also has a proprietary circuit that enables the device to adopt to both low equivalent series resistance (ESR) output capacitors, such as POSCAP, SP-CAP, and ultra-low ESR ceramic capacitors. The device operates from 7-V to 18-V VIN input. The output voltage can be programmed between 0.76V and 5.5V. The device also features an adjustable soft start time and a power good function. The TPS54429E is available in the 14-pin HTSSOP package and the 16 pin QFN package, designed to operate from –20°C to 85°C.
관심 가지실만한 유사 제품
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀
비교 대상 장치와 유사한 기능
기술 자료
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | 7V to 18V Input, 4.5-A Synchronous Step-Down SWIFTTM Converter with Eco-Mode™ datasheet | 2011/01/19 | |
| Application note | D-CAP2 Frequency Response Model, based on frequency domain analysis of Fixed On- | 2013/01/02 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPS54429EEVM-608 — 자동 건너뛰기 에코 모드를 지원하는 TPS54429E 동기 스텝다운 컨버터용 평가 모듈
EVMK2GX — 66AK2Gx 1GHz 평가 모듈
EVMK2GX("K2G"라고도 함) 1GHz EVM(평가 모듈)을 사용하면 개발자가 66AK2Gx 프로세서 제품군의 평가를 즉시 시작하고 오디오, 산업용 모터 제어, 스마트 그리드 보호 및 기타 고신뢰성, 실시간 컴퓨팅 집약적 애플리케이션의 개발을 가속화할 수 있습니다. 기존의 KeyStone 기반 SoC 장치와 마찬가지로 66AK2Gx는 DSP 및 Arm® 코어가 모두 시스템의 모든 메모리와 주변 장치를 마스터할 수 있습니다. 이 아키텍처는 DSP 중심 또는 Arm 중심의 시스템 설계를 달성할 수 있는 소프트웨어 유연성을 (...)
EVMK2GXS — 66AK2Gx(K2G) 1GHz 높은 보안 평가 모듈
개발자는 K2G 1GHz 높은 보안 평가 모듈(EVM)을 통해 높은 보안 개발 버전의 66AK2Gx 프로세서 프로그래밍을 평가 및 테스트하고 오디오 및 산업용 실시간 애플리케이션의 보안 부팅 제품 개발을 다음 단계를 가속화할 수 있습니다. 이 EVM은 Linux 및 TI-RTOS 운영 체제 모두의 프로세서 SDK에서 지원되며 EVMK2GX와 동일한 특징과 기능을 지원합니다.
참고: 이 EVM을 구매하고 소프트웨어에 액세스하려면 승인이 필요합니다. "지금 주문하기" 표의 요청 버튼을 사용하여 요청을 제출합니다.
TPS54429E TINA-TI Transient Reference Design
TPS54429E Unencrypted PSpice Transient Model Package (Rev. A)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| HTSSOP (PWP) | 14 | Ultra Librarian |
| VQFN (RSA) | 16 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.