전력 관리 AC/DC 및 DC/DC 컨버터(통합 FET)

TPS54318

활성

2.95V~6V 입력, 3A 동기 스텝다운 SWIFT™ 컨버터

이 제품의 최신 버전이 있습니다

open-in-new 대안 비교
비교 대상 장치와 유사한 기능
TPS62813-Q1 활성 2x3mm 습식 플랭크에서 고정 Fsw 및 SYNC를 지원하는 오토모티브 2.75V ~ 6V, 3A 스텝다운 컨버터 Smaller solution size and high accuracy.

제품 상세 정보

Rating Catalog Topology Buck Iout (max) (A) 3 Vin (max) (V) 6 Vin (min) (V) 2.95 Vout (max) (V) 4.5 Vout (min) (V) 0.8 Features Enable, Frequency synchronization, Power good, Pre-Bias Start-Up, Soft Start Adjustable, Synchronous Rectification, UVLO adjustable Control mode current mode Switching frequency (min) (kHz) 200 Switching frequency (max) (kHz) 2000 Operating temperature range (°C) -40 to 150 Iq (typ) (µA) 350 Duty cycle (max) (%) 98 Type Converter
Rating Catalog Topology Buck Iout (max) (A) 3 Vin (max) (V) 6 Vin (min) (V) 2.95 Vout (max) (V) 4.5 Vout (min) (V) 0.8 Features Enable, Frequency synchronization, Power good, Pre-Bias Start-Up, Soft Start Adjustable, Synchronous Rectification, UVLO adjustable Control mode current mode Switching frequency (min) (kHz) 200 Switching frequency (max) (kHz) 2000 Operating temperature range (°C) -40 to 150 Iq (typ) (µA) 350 Duty cycle (max) (%) 98 Type Converter
WQFN (RTE) 16 9 mm² 3 x 3
  • Two, 30-mΩ (typical) MOSFETs for High-Efficiency at 3-A loads
  • Switching Frequency: 200 kHz to 2 MHz
  • Voltage Reference Over Temperature: 0.8 V ± 1%
  • Synchronizes to External Clock
  • Adjustable Soft Start/Sequencing
  • UV and OV Power-Good Output
  • Low Operating and Shutdown Quiescent Current
  • Safe Start-Up into Prebiased Output
  • Cycle-by-Cycle Current Limit, Thermal and Frequency Foldback Protection
  • Operating Junction Temperature Range: –40°C to 150°C
  • Thermally Enhanced 3 mm × 3 mm 16-pin WQFN Package
  • Create a Custom Design Using the TPS54318 With the WEBENCH® Power Designer
  • Two, 30-mΩ (typical) MOSFETs for High-Efficiency at 3-A loads
  • Switching Frequency: 200 kHz to 2 MHz
  • Voltage Reference Over Temperature: 0.8 V ± 1%
  • Synchronizes to External Clock
  • Adjustable Soft Start/Sequencing
  • UV and OV Power-Good Output
  • Low Operating and Shutdown Quiescent Current
  • Safe Start-Up into Prebiased Output
  • Cycle-by-Cycle Current Limit, Thermal and Frequency Foldback Protection
  • Operating Junction Temperature Range: –40°C to 150°C
  • Thermally Enhanced 3 mm × 3 mm 16-pin WQFN Package
  • Create a Custom Design Using the TPS54318 With the WEBENCH® Power Designer

TheTPS54318 device is a full-featured, 6-V, 3-A, synchronous, step-down current-mode converter with two integrated MOSFETs.

The TPS54318 device enables small designs by integrating the MOSFETs, implementing current mode control to reduce external component count, reducing inductor size by enabling up to 2-MHz switching frequency, and minimizing the device footprint with a small, 3 mm x 3 mm, thermally enhanced, QFN package.

The TPS54318 device provides accurate regulation for a variety of loads with an accurate ±1% voltage reference (VREF) over temperature.

Efficiency is maximized through the integrated 30-mΩ MOSFETs and a 350-µA typical supply current. Using the EN pin, shutdown supply current is reduced to 2 µA by entering a shutdown mode.

Undervoltage lockout is internally set at 2.6 V, but can be increased by programming the threshold with a resistor network on the enable pin. The output voltage startup ramp is controlled by the soft-start pin. An open-drain power-good signal indicates the output is within 93% to 107% of its nominal voltage. Frequency foldback and thermal shutdown protects the device during an overcurrent condition.

For more SWIFT™ documentation, see the TI website at www.ti.com/swift.

TheTPS54318 device is a full-featured, 6-V, 3-A, synchronous, step-down current-mode converter with two integrated MOSFETs.

The TPS54318 device enables small designs by integrating the MOSFETs, implementing current mode control to reduce external component count, reducing inductor size by enabling up to 2-MHz switching frequency, and minimizing the device footprint with a small, 3 mm x 3 mm, thermally enhanced, QFN package.

The TPS54318 device provides accurate regulation for a variety of loads with an accurate ±1% voltage reference (VREF) over temperature.

Efficiency is maximized through the integrated 30-mΩ MOSFETs and a 350-µA typical supply current. Using the EN pin, shutdown supply current is reduced to 2 µA by entering a shutdown mode.

Undervoltage lockout is internally set at 2.6 V, but can be increased by programming the threshold with a resistor network on the enable pin. The output voltage startup ramp is controlled by the soft-start pin. An open-drain power-good signal indicates the output is within 93% to 107% of its nominal voltage. Frequency foldback and thermal shutdown protects the device during an overcurrent condition.

For more SWIFT™ documentation, see the TI website at www.ti.com/swift.

다운로드 스크립트와 함께 비디오 보기 동영상

관심 가지실만한 유사 제품

open-in-new 대안 비교
비교 대상 장치와 유사한 기능
TPS62813M 활성 -55C 확장된 온도의 2mm x 3mm QFN 패키지로 제공되는 2.75V ~ 6V, 3A 스텝다운 컨버터 Extended temperature -55 to +150.
TPSM82813 활성 선택적 주파수 동기화, 조정 가능한 소프트 시작 및 추적 기능을 갖춘 6V 3A 스텝다운 모듈 Module with integrated inductor.

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
9개 모두 보기
유형 직함 날짜
* Data sheet TPS54318 2.95-V to 6-V Input, 3-A Output, 2-MHz, Synchronous Step-Down SWIFT™ Converter datasheet (Rev. C) PDF | HTML 2018/04/06
Application note Semiconductor and IC Package Thermal Metrics (Rev. D) PDF | HTML 2024/03/25
Selection guide Buck Converter Quick Reference Guide (Rev. B) 2021/04/08
Application note Calculating Efficiency (Rev. A) 2020/03/06
Selection guide SWIFT DC/DC Converters Selector Guide (Rev. G) 2019/02/06
Selection guide Power Management Guide 2018 (Rev. R) 2018/06/25
Application note Understanding Thermal Dissipation and Design of a Heatsink 2011/05/04
Application note Designing Type III Compensation for Current Mode Step-Down Converters (Rev. A) 2010/09/15
User guide TPS54318EVM-512 3-A, SWIFT Regulator Evaluation Module 2009/09/23

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

시뮬레이션 모델

TPS54318 TINA-TI Transient Reference Design

SLVM651.TSC (172 KB) - TINA-TI Reference Design
시뮬레이션 모델

TPS54318 TINA-TI Transient Spice Model

SLVM652.ZIP (63 KB) - TINA-TI Spice Model
시뮬레이션 모델

TPS54318 Unencrypted PSpice Average Model Package (Rev. A)

SLVM897A.ZIP (36 KB) - PSpice Model
시뮬레이션 모델

TPS54318 Unencrypted PSpice Transient Model Package (Rev. A)

SLVM640A.ZIP (54 KB) - PSpice Model
계산 툴

TPS54620DESIGN-CALC TPS54620 and TPS54XXX Current-Mode Step-Down Converter Design Calculator

The Design Calculator Plus Application Note (SLVA352A) Calculator Tool calculates the critical external component values for the TPS54620/TPS54622/TPS54521/TPS54320/TPS54618/TPS54418/TPS54318/TPS54218/TPS54319. The calculator includes power stage design, feature design and Type II and Type III (...)
지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

제품
AC/DC 및 DC/DC 컨버터(통합 FET)
TPS54218 2.95V~6V 입력, 2A 동기 스텝다운 SWIFT™ 컨버터 TPS54318 2.95V~6V 입력, 3A 동기 스텝다운 SWIFT™ 컨버터 TPS54319 3mm x 3mm QFN 패키지, 2.95V~6V 입력, 3A, 2MHz SWIFT™ 동기형 스텝다운 컨버터 TPS54320 4.5V~17V 입력, 3A 동기 스텝다운 SWIFT™ 컨버터 TPS54418 2.95V~6V 입력, 4A 동기 스텝다운 SWIFT™ 컨버터 TPS54521 17V 입력, 5A 동기형 스텝다운 컨버터 TPS54618 2.95~6V 입력, 6A, 동기형 스텝다운 SWIFT™ 컨버터 TPS54620 4.5V~17V, 6A 동기형 SWIFT™ 벅 컨버터 TPS54622 히컵 전류 제한을 지원하는 4.5V~17V, 6A 동기형 SWIFT™ 벅 컨버터 TPS54821 4.5V~17V, 8A 동기 벅 컨버터(히컵 전류 제한 지원) TPS56921 VID 제어를 지원하는 4.5V~17V, 9A 동기형 벅 컨버터
하드웨어 개발
평가 보드
TPS54418EVM-375 TPS54418 3.3V 입력, 1.8V 출력, 4A SWIFT™ 평가 모듈 TPS54620EVM-374 TPS54620 8V~17V, 6A SWIFT™ 컨버터 평가 모듈
소프트웨어
계산 툴
TPS54620DESIGN-CALC TPS54620 및 TPS54XXX 전류 모드 스텝다운 컨버터 설계 계산기
레퍼런스 디자인

TIDA-01021 — DSO, 레이더 및 5G 무선 테스터용 멀티 채널 JESD204B 15GHz 클로킹 레퍼런스 디자인

고속 멀티 채널 애플리케이션에는 최적의 시스템 SNR, SFDR 및 ENOB를 달성하기 위해 채널 간 스큐를 관리할 수 있는 정밀한 클로킹 솔루션이 필요합니다. 이 레퍼런스 설계는 VCO가 통합된 TI의 LMX2594 광대역 PLL을 활용하여 JESD204B 인터페이스를 위한 10MHz~15GHz 클록과 SYSREF를 생성하여 별도의 보드에서 두 개의 고속 채널을 지원할 수 있습니다. 10KHz 오프셋 위상 잡음은 15GHz 클록 주파수의 경우 -104dBc/Hz 미만입니다.  TI의 ADC12DJ3200 고속 컨버터 EVM을 (...)
Design guide: PDF
회로도: PDF
레퍼런스 디자인

TIDA-01023 — 레이더 및 5G 무선 테스터용 다채널 JESD204B 클록 생성 레퍼런스 설계

고속 멀티 채널 애플리케이션에는 최적의 시스템 SNR, SFDR 및 ENOB를 달성하기 위해 정밀한 채널 간 스큐 조정이 가능한 저잡음 및 확장형 클로킹 솔루션이 필요합니다. 이 레퍼런스 설계에서는 하나의 마스터와 여러 슬레이브 클로킹 장치를 사용하여 다채널 JESD204B 동기화 클록을 지원합니다. 이 설계는 TI의 LMK04828 클록 지터 클리너와 VCO가 통합된 LMX2594 광대역 PLL을 사용하는 멀티 채널 JESD204B 클록을 제공하여 10ps 미만의 클록 간 스큐를 달성합니다. 이 설계는 3GSPS에서 TI의 (...)
Design guide: PDF
회로도: PDF
레퍼런스 디자인

TIDA-01024 — 레이더 및 5G 무선 테스터용 다채널 JESD204B 데이지 체인 클록 레퍼런스 설계

고속 멀티 채널 애플리케이션에는 최적의 시스템 SNR, SFDR 및 ENOB를 달성하기 위해 정밀한 채널 간 스큐 조정이 가능한 저잡음 및 확장형 클로킹 솔루션이 필요합니다. 이 레퍼런스 설계는 데이지 체인 구성에서 JESD204B 동기화 클록을 확장하는 것을 지원합니다. 이 설계는 TI의 LMK04828 클록 지터 클리너와 VCO가 통합된 LMX2594 광대역 PLL을 사용하는 멀티 채널 JESD204B 클록을 제공하여 10ps 미만의 클록 간 스큐를 달성합니다. 이 설계는 3GSPS에서 TI의 ADC12DJ3200 EVM으로 (...)
Design guide: PDF
회로도: PDF
레퍼런스 디자인

TIDA-010131 — 레이더 및 무선 5G 테스터용 멀티 채널 RF 트랜시버 클로킹 레퍼런스 설계

위상 배열 레이더, 무선 통신 테스터 및 전자전 같은 고속 완제품을 위한 아날로그 프론트 엔드에는 동기화된 다중 트랜시버 신호 체인이 필요합니다. 각 트랜시버 신호 체인에는 고속, ADC(아날로그-디지털 컨버터), DAC(디지털-아날로그 컨버터) 및 클록 서브시스템이 포함됩니다. 클록 서브시스템은 정확한 지연 조정이 가능한 저잡음 샘플링 클록을 제공하여 신호 대 잡음 비율(SNR), SFDR(스퓨리어스 프리 동적 범위), IMD3, ENOB(유효 비트 수) 등과 같은 최적의 시스템 성능과 가장 낮은 채널 간 스큐를 달성합니다. (...)
Design guide: PDF
회로도: PDF
패키지 CAD 기호, 풋프린트 및 3D 모델
WQFN (RTE) 16 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상