TPS5430
- Wide input voltage range:
- TPS5430: 5.5V to 36V
- TPS5431: 5.5V to 23V
- Up to 3A continuous (4A peak) output current
- High efficiency up to 95% enabled by 100mΩ integrated MOSFET switch
- Wide output voltage range: adjustable down to 1.22V with 1.5% initial accuracy
- Internal compensation minimizes external parts count
- Fixed 500kHz switching frequency for small filter size
- Improved line regulation and transient response by input voltage feedforward
- System protected by overcurrent limiting, overvoltage protection, and thermal shutdown
- –40°C to 125°C operating junction temperature range
- Available in small thermally enhanced 8-pin SO PowerPAD™ integrated circuit package
- Create a custom design using the TPS5430 with the WEBENCH Power Designer
The TPS543x is a high-output-current PWM converter that integrates a low-resistance, high-side N-channel MOSFET. Included on the substrate with the listed features are a high-performance voltage error amplifier that provides tight voltage regulation accuracy under transient conditions; an undervoltage-lockout circuit to prevent start-up until the input voltage reaches 5.5V; an internally set slow-start circuit to limit inrush currents; and a voltage feed-forward circuit to improve the transient response. Using the ENA pin, shutdown supply current is reduced to 15µA typically. Other features include an active-high enable, overcurrent limiting, overvoltage protection and thermal shutdown. To reduce design complexity and external component count, the TPS543x feedback loop is internally compensated. The TPS5431 is intended to operate from power rails up to 23V. The TPS5430 regulates a wide variety of power sources including 24V bus.
The TPS543x device is available in a thermally enhanced, easy to use 8-pin SOIC PowerPAD integrated circuit package. TI provides evaluation modules and the Designer software tool to aid in quickly achieving high-performance power supply designs to meet aggressive equipment development cycles.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | TPS543x 3A, Wide Input Range, Step-Down Converter datasheet (Rev. L) | PDF | HTML | 2026. 4. 21 | |
| 기술 문서 | 고전압 DCM 반전 충전 펌프 컨버터를 설계하는 방법 | PDF | HTML | Download English Version | 2025. 8. 28 | |
| 선택 가이드 | Power Management Guide 2018 (Rev. R) | 2018. 6. 25 | |||
| 기술 문서 | Laying out an inverting buck-boost converter for success | PDF | HTML | 2016. 9. 28 | ||
| 애플리케이션 노트 | Simplifying Stability Checks (Rev. B) | 2013. 11. 5 | |||
| 사용 설명서 | Voltage-Controlled Amplifier Evaluation Kit | 2008. 8. 25 | |||
| 추가 자료 | TPS5430DDA Test Report | 2008. 2. 19 | |||
| 아날로그 디자인 학술지 | Using a buck converter in an inverting buck-boost topology | 2007. 10. 12 | |||
| 애플리케이션 노트 | Using the TPS5430 As An Inverting Buck Boost Converter (Rev. A) | 2007. 8. 15 | |||
| 애플리케이션 노트 | Using TPS5410/20/30/31/50 w/Aluminum/Ceramic Output Capacitors (Rev. C) | 2007. 3. 21 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPS5430EVM-173 — TPS5430 35V 입력, 5V 출력, 3A 평가 모듈
The TPS5430EVM-173 evaluation module allows the designer to evaluate the TPS5430 SWIFT DC/DC converter and is designed with external components to operate over a wide input voltage range. The input voltage range of this module is 9.0 V to 36 V and the output voltage is pre-set to (...)
TPS5430EVM-342 — TPS5430EVM-342 2.25A 인버팅 벅 부스트 레귤레이터 평가 모듈
TPS5431EVM-173 — 9V~21V 입력, 3A 스텝다운 컨버터
The TPS5431EVM-173 evaluation module allows the designer to evaluate the TPS5431 SWIFT DC/DC converter and is designed with very few external components. The input voltage range of this module is 9.0 V to 21 V and the output voltage is pre-set to 5 V. The output voltage can be easily (...)
TPS5430 TINA-TI Transient Inverting Reference Design
TPS5430 TINA-TI Transient Start-up 5V Buck Reference Design (Rev. A)
TPS5430 TINA-TI Transient Start-up LED Driver Reference Design (Rev. A)
TIDA-00075 — 광대역 및 고전압 임의 파형 제너레이터 프론트 엔드
이 디자인은 DAC5682Z의 전류 싱크 출력과 액티브 인터페이스를 사용하는 방법을 보여줍니다. 이를 위한 일반적인 애플리케이션으로는 임의 파형 제너레이터용 프론트 엔드가 있습니다. EVM에는 디지털-아날로그 변환을 위한 DAC5682Z, 광대역 연산 증폭기를 사용하여 액티브 인터페이스 구현을 시연하기 위한 OPA695와 THS3091 및 THS3095가 포함되어 있어 넓은 전압 스윙을 지원하는 연산 증폭기를 표시합니다. 또한 보드에 클록 생성을 위한 CDCM7005, VCXO 및 레퍼런스와 전압 조정을 위한 선형 레귤레이터가 (...)
TIDEP0038 — 비전 분석 OMAPL-138 기반 하드웨어/소프트웨어 레퍼런스 디자인
Vision analytics is a critical function for many industrial automated applications including machine vision, inspection automation, surveillance and image processing. This hardware/software design kit is optimized for vision analytic based applications and provides the all of hardware design (...)
TIDEP0040 — SDR(소프트웨어 기반 무선 통신) OMAPL-138 기반 하드웨어 및 소프트웨어 레퍼런스 설계
소프트웨어 기반 무선 통신(SDR)은 무선 인프라 시장에서 널리 사용되는 애플리케이션입니다. TI ADC 및 DAC와 함께 TI DSP 및 uPP(범용 병렬 포트)의 실시간 신호 처리를 활용하는 이 하드웨어 레퍼런스 설계는 SDR 알고리즘 개발자에게 알고리즘 및 솔루션의 빠른 개발 및 시연을 지원하는 빠른 플랫폼을 제공합니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| HSOIC (DDA) | 8 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.