TPS53679
- Intel VR13 Serial VID (SVID) Compliant
- Full VR13 Server Feature Set Including Digital Input Power Monitor
- Programmable Loop Compensations
- Configurable with Non-Volatile Memory (NVM) for Low External Component Counts
- Individual Phase Current Calibrations and Reports
- Dynamic Phase Shedding with Programmable Current Threshold for Optimizing Efficiency at Light and Heavy Loads
- Fast Phase-Adding for Undershoot Reduction (USR)
- Backward VR12.0 and VR12.5 Compatible
- 8-Bit DAC with Selectable 5 mV or 10 mV Resolution and Output Ranges from 0.25 V to 1.52 V or 0.5 to 2.8125 V for Dual Channels
- Driverless Configuration for Efficient High-Frequency Switching
- Fully Compatible with TI NextFET™ Power Stage for High-Density Solutions
- Accurate, Adjustable Voltage Positioning
- Patented AutoBalance™ Phase Balancing
- Selectable, 16-level Per-Phase Current Limit
- PMBus™ System Interface for Telemetry of Voltage, Current, Power, Temperature, and Fault Conditions
- Dynamic Output Voltage Transitions with Programmable Slew Rates via SVID or PMBus Interface
- Conversion Voltage Range: 4.5 V to 17 V
- Low Quiescent Current
The TPS53679 is a fully VR13 SVID compliant step-down controller with dual channels, built-in non-volatile memory (NVM), and PMBus™ interface, and is fully compatible with TI NexFET ™power stage. Advanced control features such as D-CAP+™ architecture with undershoot reduction (USR) provide fast transient response, low output capacitance, and good current sharing. The device also provides novel phase interleaving strategy and dynamic phase shedding for efficiency improvement at different loads. Adjustable control of VCORE slew rate and voltage positioning round out the Intel® VR13™ features. In addition, the device supports the PMBus communication interface for reporting the telemetry of voltage, current, power, temperature, and fault conditions to the systems. All programmable parameters can be configured by the PMBus interface and can be stored in NVM as the new default values to minimize the external component count.
The TPS53679 device if offered in a thermally enhanced -pin QFN packaged and is rated to operate from –40°C to 125°C.
추가 정보 요청
전체 데이터시트 및 기타 설계 지원 툴은 지금 요청하십시오.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | TPS53679 Dual-Channel (6-Phase +1-Phase) or (5-Phase + 2-Phase) D-CAP+™ Step-Down Multiphase Controller with NVM and PMBus™ for VR13 Server VCORE datasheet | PDF | HTML | 2017. 8. 7 | |
| 애플리케이션 노트 | Multiphase Buck Design from Start to Finish, Part 1 (Rev. B) | 2021. 4. 7 | |||
| 애플리케이션 노트 | D-CAP+™ Control for Multiphase Step-Down Voltage Regulators for Powering Microp | 2019. 1. 13 | |||
| 애플리케이션 노트 | NVM Programming for VR13 Power Controllers | PDF | HTML | 2018. 5. 4 | ||
| 기술 문서 | The D-CAP+™ Modulator: Evaluating the small-signal robustness | PDF | HTML | 2017. 11. 15 | ||
| 기술 문서 | An introduction to the D-CAP+™ modulator and its real world performance | PDF | HTML | 2017. 11. 8 | ||
| 사용 설명서 | Using the Fusion Digital Power Designer for TPS536xx VR13 Multiphase Solutions | 2016. 12. 16 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
FUSION_DIGITAL_POWER_DESIGNER — 디지털 전원 소프트웨어
Fusion Digital Power™ GUI(그래픽 사용자 인터페이스) 소프트웨어는 선별된 텍사스 인스트루먼트 디지털 전원 컨트롤러 및 시퀀서/상태 모니터를 구성하고 모니터링하는 데 사용됩니다. 이 애플리케이션은 PMBus 프로토콜을 사용하여 TI USB 어댑터를 경유, 직렬 버스를 통해 장치와 통신합니다.
PMP20489 — 고밀도 12Vin 0.8V 200A 및 3.3V 75A POL 레퍼런스 디자인
TIDA-01367 — Cavium CN99xx Thunder X2 CPU PMBus VDD/VDD SRAM 코어 전원 설계
TIDA-01367 레퍼런스 설계는 TPS53679 다중 위상 컨트롤러 및 CSD95490Q5MC 스마트 전력계를 사용하여 Cavium ThunderX2® ARM 프로세서에 전원을 공급하는 데 적합한 고성능 설계를 구현합니다.
컨트롤러의 듀얼 출력은 6상 설계와 20A, 0.85V 보조 레일을 갖춘 240A, 0.8V 코어 레일을 목표로 합니다. 스마트 전력계와 통합된 PMBus™를 통해 주요 설계 매개 변수의 손쉬운 출력 전압 설정과 원격 측정 기능이 가능합니다. 이 레퍼런스 설계는 입력 및 출력 전압, 전류, 전원 및 온도의 (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| WQFN (RSB) | 40 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.