TPS51219
- Differential Voltage Feedback
- DC Compensation for Accurate Regulation
- Wide Input Voltage Range: 3 V to 28 V
- Output
Voltage Range: 0.5 V to 2.0 V with
Fixed Options of 1.05 V and 1.00 V - Wide Output Load Range: 0 A to 20 A+
- Adaptive On-Time Modulation with Selectable Control Architecture and
Frequency
- D-CAP Mode at 300 kHz/400 kHz for Fast Transient Response
- D-CAP2 Mode at 500 kHz/670 kHz for Ceramic Output Capacitor
- 4700 ppm/°C, Low-Side RDS(on) Current Sensing
- RSENSE Accurate Current Sense Option
- Internal, 1-ms Voltage Servo Softstart
- Built-In Output Discharge
- Power Good Output
- Integrated Boost Switch
- Built-In OVP/UVP/OCP
- Thermal Shutdown (Non-latched)
- 3 mm × 3 mm, 16-Pin, QFN (RTE) Package
The TPS51219 is a small-sized single buck controller with adaptive on-time control. It provides a choice of control modes (D-CAP™ or D-CAP2™) to meet a wide range of system requirements. It is designed for tight DC regulation requirements such as the VCCIO application for Intel notebooks. The performance and flexibility of the TPS51219 makes it suitable for low output voltage, high current, PC system power rails and similar point-of-load (POL) power supplies. Differential voltage feedback and the voltage compensation function combine to provide high precision power to load devices.
A small package, fixed voltage options and minimal external component count saves cost and space, while a dedicated EN pin and pre-set frequency selections minimize design effort. The skip-mode at light load condition, strong gate drivers, and low-side FET RDS(on) current sensing provides high efficiency operation over a broad load range. The external resistor current sense option enables accurate current sensing. The conversion input voltage (the high-side FET drain voltage) ranges from 3 V to 28 V and output voltage ranges from 0.5 V to 2.0 V. The device requires an external 5-V supply.
The TPS51219 is available in a 16-pin, QFN package and is specified for ambient temperature from -40°C to 85°C.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 | |
|---|---|---|---|---|---|---|
| * | 데이터 시트 | High Performance, Single Synchronous Step-Down Controller with Differential Volt datasheet (Rev. B) | 2011. 10. 1 | |||
| 사용 설명서 | TPS51219 Buck Controller Evaluation Module User's Guide (Rev. A) | PDF | HTML | 2022. 2. 18 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPS51219 Unencrypted PSpice Average Model Package (Rev. A)
TPS51219 Unencrypted PSpice Transient Model Package (Rev. A)
TIDA-00020 — Intel IMVP7 2세대 코어 모바일(코어 i7) 전원 관리 레퍼런스 디자인
The Intel® Core i7 power management design is a reference design for the Intel® IMVP-7 Serial VID (SVID) power system. This design features an IMVP-7 3-phase CPU supply, a single-phase GPU Vcore supply, a 1.05-VCC IO supply, and a DDR3L/DDR4 memory rail. To greatly improve power (...)
TIPA-050005 — Tiger Lake를 위한 PC 애플리케이션의 비절연 로드 지점 솔루션
Intel® Tiger Lake 마이크로 아키텍처와 같은 고급 프로세서 및 플랫폼에는 메모리, 저전력 CPU 레일, 충전식 배터리 어레이 또는 12V 입력 버스의 3.3V 및 5V 레일 요구 사항을 위한 POL(Point-of-Load) 솔루션이 필요합니다.
이 전원 공급 장치 설계는 최신 DC/DC 컨버터를 강조하고 PC 애플리케이션의 일반적인 Tiger Lake 전원 요구 사항을 해결하는 기능을 설명합니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| WQFN (RTE) | 16 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.