이 제품의 최신 버전이 있습니다
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능.
TPS4H160-Q1
- Qualified for automotive applications
- AEC-Q100 qualified with the following results:
- Device temperature grade 1: –40°C to 125°C ambient operating temperature range
- Device HBM ESD classification level H3A
- Device CDM ESD classification level C4B
- Functional Safety-Capable
- Quad-channel 160mΩ smart high-side switch with
full diagnostics
- Version A: open-drain digital output
- Version B: current-sense analog output
- Wide operating voltage 3.4V to 40V
- Ultra-low standby current: <500nA
- High-accuracy current sense: ±15% under >25mA load
- Adjustable current limit with external resistor, ±15% under >500mA load
- Protection
- Short-to-GND protection by current limit (internal or external)
- Thermal shutdown with latch off option and thermal swing
- Inductive load negative voltage clamp with optimized slew rate
- Loss-of-GND and loss-of-battery protection
- Diagnostics
- Overcurrent and short-to-ground detection
- Open-load and short-to-battery detection
- Global fault report for fast interrupt
- 28-pin thermally-enhanced PWP package
The TPS4H160-Q1 device is fully protected quad-channel smart high-side switch with four integrated 160mΩ NMOS power FETs.
Full diagnostics and high-accuracy current sense enable intelligent control of the load.
An external adjustable current limit improves the reliability of whole system by limiting the inrush or overload current.
관심 가지실만한 유사 제품
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능.
기술 자료
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPS4H160EVM — TPS4H160-Q1 쿼드 채널 스마트 고압측 전원 스위치 레퍼런스 디자인
TPS4H160A-Q1 Unencrypted PSpice Transient Model Package (Rev. A)
TPS4H160B-Q1 Unencrypted PSpice Transient Model Package (Rev. A)
TIDA-010016 — 8포트 IO-Link 마스터 레퍼런스 설계
TIDA-010253 — 에너지 저장 시스템을 위한 배터리 제어 장치 레퍼런스 디자인
이 레퍼런스 디자인은 고전압 리튬 이온(리튬-이온), 리튬 인산철(LiFePO4) 배터리 랙을 위한 중앙 컨트롤러입니다. 이 디자인은 고전압 릴레이, 통신 인터페이스(RS-485, CAN(컨트롤러 영역 네트워크), 데이지 체인 및 이더넷 포함), 습도 센서에 대한 확장 가능한 인터페이스, 고전압 아날로그-디지털 컨버터(ADC) 및 전류 센서를 위한 구동 회로를 제공합니다.
이 디자인은 고성능 마이크로컨트롤러를 사용하여 애플리케이션을 개발 및 테스트합니다. 이러한 기능을 통해 고용량 배터리 랙 애플리케이션의 중앙 컨트롤러에 이 (...)
TIDA-01323 — 쿼드 4Gbps FPD-Link III 듀얼 CSI-2 출력 및 PoC를 지원하는 ADAS 멀티 센서 허브 레퍼런스 설계
TIDA-020071 — TDA4 쿼드 차량용 PHY RGMII 레퍼런스 설계
이 레퍼런스 설계는 RGMII 이더넷 확장 커넥터를 통해 Jacinto™ 7 프로세서 EVM 보드와 상호 작용합니다. 차량용 이더넷 연결은 TI의 차량용 이더넷 물리적 계층(PHY)을 통해 추가됩니다. 이 설계는 TI의 DP83TC818S-Q1 100Mbps 및 DP83TG721S-Q1 1000Mbps 단일 페어 이더넷(SPE) PHY의 구현을 보여줍니다.로 구현됩니다. 커플링 네트워크는 12V에서 데이터 라인에 결합하는 데 사용됩니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| HTSSOP (PWP) | 28 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.