TPS3801
- Small, 5-Pin SC-70 (SOT-323) Package
- Supply Current of 9 µA
- Power-On Reset Generator With Fixed Delay Time
- TPS3800 = 100 ms
- TPS3801 = 200 ms
- TPS3802 = 400 ms
- Precision Supply Voltage Monitor 1.8 V, 2.5 V,
2.7 V, 3 V, 3.3 V, 5 V, and Adjustable - Manual Reset Input (Except TPS3801-01)
- Temperature Range: –40°C to +85°C
- APPLICATIONS
- Applications Using DSPs, Microcontrollers, or Microprocessors
- Wireless Communication Systems
- Portable/Battery-Powered Equipment
- Programmable Controls
- Intelligent Instruments
- Industrial Equipment
- Notebook/Desktop Computers
- Automotive Systems
All other trademarks are the property of their respective owners.
The TPS380x family of supervisory circuits monitor supply voltages to provide circuit initialization and timing supervision, primarily for DSPs and other processor-based systems.
These devices assert a push-pull RESET signal when the SENSE (adjustable version) or VDD (fixed version) drops below a preset threshold. The RESET output remains asserted for the factory programmed delay time after the SENSE or VDD return above its threshold.
The TPS380x devices, except the TPS3801-01, incorporate a manual reset input (MR). A low level at MR causes RESET to become active.
The TPS380x uses a precision reference to achieve an overall threshold accuracy of 2%—2.5%. These devices are available in a 5-pin SC-70 package, which is only about half the size of a 5-pin SOT-23 package.
The TPS380x devices are fully specified over a temperature range of –40°C to +85°C.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | Ultra-Small Supply Voltage Supervisors datasheet (Rev. E) | 2010. 10. 29 | ||
| e북 | Voltage Supervisor and Reset ICs: Tips, Tricks and Basics | 2019. 6. 28 | |||
| 테스트 보고서 | PMP15014 Test Results | 2016. 5. 12 | |||
| 테스트 보고서 | PMP4742 Test Results | 2010. 11. 12 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
PMP15014 — 오토모티브 인포테인먼트 전원 시스템 레퍼런스 디자인
PME15014는 인포테인먼트 시스템의 차량용 오프 배터리 프론트 엔드 전원 공급 장치로 설계되었습니다. 이는 일차 전원 시스템을 사용하여 생성되었으며, 고전압 입력 요구 사항을 충족하고 다중 출력 레일에 낮은 전압을 제공하여 다양한 부하 요구 사항을 충족합니다. 이 시스템은 과도 상태 및 역방향 극성 보호도 제공합니다. 넓은 입력 전압 벅 단계는 AM 대역을 피하기 위해 2.1Mhz에서 작동하며, CISPER 25를 지원하기 위해 차동 EMI 필터를 통해 탁월한 EMI 성능을 제공합니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOT-SC70 (DCK) | 5 | Ultra Librarian |