TPS3702
- Input Voltage Range: 2V to 18V
- High threshold accuracy:
- 0.25% (typical)
- 0.9% (–40°C to 125°C)
- Fixed window thresholds optimized for nominal rails between 1V and 5V
- Open-drain outputs for overvoltage and undervoltage indication
- Internal glitch immunity
- Threshold adjust using the SET pin
- Low quiescent current: 7µA (typical)
- Internal threshold hysteresis: 0.55%, 1.0%
- SOT-6 package
The TPS3702 is an integrated overvoltage and undervoltage window voltage detector in a small SOT-6 package. This highly accurate voltage detector is an excellent choice for systems that operate on low-voltage supply rails and have narrow margin supply tolerances. Low threshold hysteresis options of 0.55% and 1.0% prevent false reset signals when the monitored voltage supply is in the normal range of operation. Internal glitch immunity and noise filters further eliminate false resets resulting from erroneous signals.
The TPS3702 does not require any external resistors for setting overvoltage and undervoltage reset thresholds, which further increases overall accuracy and reduces solution size and cost. The SET pin is used to select between the two available threshold voltages designed into each device. A separate SENSE input pin and VDD pin allow for the redundancy sought by safety-critical and high-reliability systems. This device also features independent reset outputs for the OV and UV pins; as a result of the open-drain configuration, UV and OV can be tied together.
This device has a low typical quiescent current specification of 7µA and is qualified for use over the industrial temperature range of –40°C to 125°C.
관심 가지실만한 유사 제품
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | TPS3702 High -Accuracy Over and Undervoltage Monitoring datasheet (Rev. A) | PDF | HTML | 2024. 2. 22 | |
| 기능 안전 정보 | TPS3702 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA | PDF | HTML | 2021. 3. 3 | ||
| 애플리케이션 노트 | Voltage Supervisors (Reset ICs): Frequently Asked Questions (FAQs) (Rev. A) | 2020. 3. 17 | |||
| 선택 가이드 | Voltage Supervisors (Reset ICs) Quick Reference Guide (Rev. H) | 2020. 2. 28 | |||
| e북 | Voltage Supervisor and Reset ICs: Tips, Tricks and Basics | 2019. 6. 28 | |||
| 기술 문서 | Tips and tricks for optimizing your voltage supervisor | PDF | HTML | 2017. 3. 7 | ||
| 기술 문서 | Oh yes! My FPGA application is safe | PDF | HTML | 2015. 10. 26 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
LAUNCHXL-F280049C — F280049C LaunchPad™ 개발 키트 C2000™ Piccolo™ MCU
TPS3702CX33EVM-683 — TPS3702CX33EVM-683 평가 모듈
The TPS3702CX33EVM-683 evaluation module (EVM) helps designers evaluate the operation and performance of the TPS3702, which is a low power, high accuracy over-voltage and under-voltage detector that is available with fixed threshold options. The EVM circuit is configured to be a reference design (...)
TMDSDOCK28379D — F28379D Delfino 실험 키트
TMDSDOCK28379D는 C2000™ Delfino™ F2837x 및 Piccolo F2807x 마이크로컨트롤러 제품 시리즈를 위한 HSEC180 controlCARD 기반 평가 및 개발 툴입니다. 도킹 스테이션은 controlCARD에 전원을 공급하며 프로토타이핑을 위한 브레드보드 영역이 있습니다. 일련의 헤더 핀을 사용하여 주요 장치 신호에 액세스할 수 있습니다.
TMDSCNCD280049C — C2000™ MCU controlCARD™용 F280049C 평가 모듈
TMDSCNCD280049C는 C2000™ F28004x 시리즈 마이크로컨트롤러 제품을 위한 HSEC180 controlCARD 기반 평가 및 개발 툴입니다. controlCARD는 초기 평가 및 시스템 프로토타이핑에 이상적입니다. controlCARD는 두 가지 표준 폼 팩터(100핀 DIMM 또는 180핀 HSEC) 중 하나를 활용하여 프로파일이 낮은 단일 보드 컨트롤러 솔루션을 제공하는 완전한 보드 수준 모듈입니다. 첫 번째 평가의 경우 controlCARD는 일반적으로 TMDSHSECDOCK 베이스보드와 함께 번들로 (...)
TMDSCNCD28379D — C2000™ Delfino MCU controlCARD™용 F28379D 개발 키트
TMDSCNCD28379D는 TI MCU의 F2837xD, F2837xS 및 F2807x 시리즈를 위한 HSEC180 controlCARD 기반 평가 및 개발 툴입니다. controlCARD는 초기 평가 및 시스템 프로토타이핑에 이상적입니다. controlCARD는 두 가지 표준 폼 팩터(100핀 DIMM 또는 180핀 HSEC) 중 하나를 활용하여 프로파일이 낮은 단일 보드 컨트롤러 솔루션을 제공하는 완전한 보드 수준 모듈입니다. 첫 번째 평가의 경우 controlCARD는 일반적으로 베이스보드와 함께 번들로 구매하거나 (...)
TPS3702CX33 Unencrypted PSpice Transient Model Package (Rev. A)
SBVC045 — TPS3702 Decoder Calculator
PMP40690 — C2000™ MCU 및 GaN을 사용하는 4kW 인터리브 CCM 토템 폴 브리지리스 PFC 레퍼런스 설계
TIDA-00392 — TPS3702를 Delfino에서 전압 레일 모니터링한 레퍼런스 디자인
The C2000 Delfino microcontrollers' demand for a tight tolerance on both of its supply rails; this supervisory topology is designed to monitor the two voltage rails and assert a reset when either rail is not within its threshold. The two supervisors will monitor for both undervoltage and (...)
TIDA-010052 — 모터 드라이브용 안전 전원 공급 장치 레퍼런스 설계
이 레퍼런스 설계는 두 개의 MCU를 사용하는 아키텍처에서 마이크로컨트롤러에 전원을 투입하는 안전 전원 공급 장치를 구현합니다. 이 설계에는 MCU 손상을 방지하는 과전압 보호 및 단락 보호를 포함하여 여러 가지 보호 기능이 있습니다. DC/DC, LMR36515 및 LMR36015는 5V 및 12V 레일을 3.3V로 변환하며, 이는 TPS3703 및 TPS3702 전압 모니터에 의해 각각 모니터링됩니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOT-23-THN (DDC) | 6 | Ultra Librarian |