TPS26744E-Q1
- AEC-Q100 test guidance with the
following:
- Device temperature grade 1: -40oC to 125oC ambient operating temperature range
- Device HBM ESD classification
level:
- Level 2 and level 3A
- Device CDM ESD classification
level:
- Level C2a and C2b
- TPS26744E-Q1 is a fully configurable dual-port PD3.2 source controller.
- Extended power range (EPR) support
- 40V tolerant VBUS
- 24V tolerant CC and DP/DM pins
- GUI tool to easily configure for various applications
- Programmable power supply (PPS) support (source)
- USB Type-C power delivery (PD) controller
- USB-IF certified (TID # 14058)
- USB PD R3.2 compliant
- USB Type-C R2.4 compliant
- DisplayPort alternate mode support
- 20 configurable GPIOs
- Cable attach and orientation detection
- Integrated VCONN switch. No external supply required to read eMarker
- Physical layer and policy engine
- Integrated LDO with input up to 40V
- One I2C controller port (I2C2)
- Two I2C target ports (I2C1, I2C3)
- UART and LIN support
- Closed-chassis debugging
- Integrated flash memory supporting updates via
I2C gated by an authentication check
- Closed-chassis flash updates via I2C4
- System power management
- Across multiple ports and multiple devices
- Thermal foldback
- Power foldback
- Liquid detection and corrosion mitigation
The TPS26744E-Q1 is a stand-alone dual-port USB Type-C and power delivery (PD) source controller for any automotive USB-C port application including extended power range (EPR) voltages. The TPS26744E-Q1 is capable of supporting all USB-PD power supply negotiation options for standard power range (SPR) and EPR. The TPS26744E-Q1 automatically identifies USB-C cable capabilities, and adjusts for the maximum current allowed by the cable, without requiring an external 5V supply for VCONN. The TPS26744E-Q1 supports DisplayPort over USB-C and legacy D+/D- charging.
The TPS26744E-Q1 controls a DC/DC via I2C or PWM to achieve a complete USB-C PD application. The TPS26744E-Q1 has SYNC outputs to keep external DC/DC switching out-of-phase for each port, with dual-random spread-spectrum (DRSS).
The TPS26744E-Q1 has integrated protections for thermal and input voltage monitoring for power foldback, VBUS high/low monitoring, and liquid detection along with corrosion mitigation.
The TPS26744E-Q1 also supports USB-C Alternate Modes such as DisplayPort. The TPS26744E-Q1 offers multiple interface options for the system including I2C and LIN support, along with configurable GPIOs.
추가 정보 요청
TPS26744E-Q1에 대한 전체 데이터 시트 및 추가 리소스가 제공됩니다. 지금 요청
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | TPS26744E-Q1 Automotive Dual-Port USB Type-C PD Controller with 240W EPR and DisplayPort overUSB Type-C datasheet | PDF | HTML | 2025. 11. 12 | |
| 인증서 | TPS26744EQ1EVM EU Declaration of Conformity | PDF | HTML | 2025. 2. 20 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPS26742EQ1EVM — TPS26742E-Q1 평가 모듈
TPS26744EQ1EVM — TPS26744E-Q1 평가 모듈
PMP23501 — 차량용, 24V~60V 입력, 2포트 USB Power Delivery 최대 60W(포트당) 레퍼런스 설계
PMP23618 — 2포트(각각 최대 180W) 및 24V~60V 입력을 지원하는 차량용 USB 전원 공급 레퍼런스 설계
이 레퍼런스 설계는 자동차 ADAS(첨단 운전 보조 시스템), 인포테인먼트 및 계기판 애플리케이션에 전력을 제공합니다. 24V~60VDC 입력 범위 이상에서 주로 48VDC 전원으로 작동합니다. 다양한 고전력 장치를 충전할 수 있는 2개의 USB PD 출력이 제공됩니다. 이 설계는 48Vin에서 최대 180W, 36V, 5A 출력에 대해 98.1%의 변환 효율을 제공합니다. 테스트 보고서에는 전체 입력 범위에 걸친 작동 데이터가 포함되어 있으며, 최악의 시나리오를 보여주기 위한 5Vout~36Vout 사이의 출력 전환을 포함하고 (...)
PMP31344 — DisplayPort™ 대체 모드를 지원하는 차량용, 12V 입력, 140W 2포트 USB Power Delivery 레퍼런스 설계
이 레퍼런스 설계는 두 개의 USB Type-C® 포트에 전원과 디지털 통신을 모두 제공하는 차량용 USB EPR(확장 전력 범위) 시스템을 보여줍니다. USB-C 케이블을 연결할 때 TPS26744E-Q1은 연결된 장치와 대상 출력 전압 및 최대 전류를 협상합니다. 그런 다음 컨트롤러가 전력 전송을 처리하는 벅 부스트 컨트롤러(LM251772)를 활성화하고 적절하게 구동합니다.
통신 측면에서 TPS26744E-Q1은 USB-DP 모드 선택을 위해 휴대폰 또는 랩톱 등 연결된 USB 장치와 협상할 수 있습니다. 그런 다음 (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN (RHB) | 32 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.