TPS2660
- 4.2-V to 60-V Operating voltage, 62-V absolute maximum
- Integrated
reverse input polarity protection down to –60 V
- Zero additional components required
- Integrated back to back MOSFETs with 150-mΩ total RON
- 0.1-A to 2.23-A Adjustable current limit
(±5% accuracy at 1 A) - Functional safety
capable
- Documentation available to aid functional safety system design
- Load protection during Surge (IEC 61000-4-5) with minimum external components
- IMON current indicator output (±8.5% accuracy)
- Low quiescent current, 300-µA in operating, 20-µA in shutdown
- Adjustable UVLO, OVP cut off, output slew rate control
- Reverse current blocking
- Fixed 38-V overvoltage clamp (TPS26602 only)
- Available in easy-to-use 16-Pin HTSSOP and 24-Pin VQFN packages
- Selectable current-limiting fault response options (Auto-Retry, Latch Off, Circuit Breaker Modes)
- UL 2367 Recognized
- File No. 169910
- RILIM ≥ 5.36 kΩ (2.35-A maximum)
- UL60950 - Safe during
single point failure test
- Open/Short ILIM detection
The TPS2660x devices are compact, feature rich high voltage eFuses with a full suite of protection features. The wide supply input range of 4.2 to 60 V allows control of many popular DC bus voltages. The device can withstand and protect the loads from positive and negative supply voltages up to ±60 V. Integrated back to back FETs provide reverse current blocking feature making the device suitable for systems with output voltage holdup requirements during power fail and brownout conditions. Load, source and device protection are provided with many adjustable features including overcurrent, output slew rate and overvoltage, undervoltage thresholds. The internal robust protection control blocks along with the high voltage rating of the TPS2660x helps to simplify the system designs for Surge protection.
A shutdown pin provides external control for enabling and disabling the internal FETs as well as placing the device in a low current shutdown mode. For system status monitoring and downstream load control, the device provides fault and precise current monitor output. The MODE pin allows flexibility to configure the device between the three current-limiting fault responses (circuit breaker, latch off, and Auto-retry modes).
The devices are available in a 5-mm × 4.4-mm 16-pin HTSSOP as well as 5-mm x 4-mm 24-pin VQFN package and are specified over a –40°C to +125°C temperature range.
관심 가지실만한 유사 제품
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀.
비교 대상 장치와 유사한 기능.
기술 자료
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPS26600-02EVM — TPS2660 통합 60V 2.23A 산업용 eFuse 평가 모듈
TPS26600-02EVM은 TI TPS2660x 장치의 레퍼런스 회로 평가에 사용할 수 있습니다. TPS2660x은 역병렬 FET, 프로그래머블 부족 전압, 과전압, 역방향 극성, 과전류, 돌입 전류 보호 및 출력 전류 모니터링 기능이 통합된 소형 4.2V~55V, 2.23A 산업용 eFuse입니다.
SLVC668 — TPS26600 Design Calculator
SLVC669 — TPS26602 Design Calculator
SLVC681 — TPS26601 Design Calculator
TVS-RECOMMENDATION-CALC — TVS diode recommendation tool
TIDA-010008 — 그리드 애플리케이션의 과도 차단 기능을 위한 평면 클램프 TV 기반 레퍼런스 설계
TIDA-010052 — 모터 드라이브용 안전 전원 공급 장치 레퍼런스 설계
이 레퍼런스 설계는 두 개의 MCU를 사용하는 아키텍처에서 마이크로컨트롤러에 전원을 투입하는 안전 전원 공급 장치를 구현합니다. 이 설계에는 MCU 손상을 방지하는 과전압 보호 및 단락 보호를 포함하여 여러 가지 보호 기능이 있습니다. DC/DC, LMR36515 및 LMR36015는 5V 및 12V 레일을 3.3V로 변환하며, 이는 TPS3703 및 TPS3702 전압 모니터에 의해 각각 모니터링됩니다.
TIDA-010261 — 데이터 라인을 통한 전원을 지원하는 10BASE-T1L 싱글 페어 이더넷 센서 레퍼런스 설계
이 레퍼런스 설계에서는 PoDL(Power over Data Line)을 포함한 싱글 페어 이더넷(SPE) 통신 백 엔드의 구현을 보여줍니다. 이 설계는 한 쪽의 아날로그 프론트 엔드와 다른 쪽의 이더넷 물리적(PHY) 계층을 인터페이싱하는 Sitara™ AM2434 MCU를 사용합니다. 강력한 MCU를 사용하면 센서 데이터를 이더넷에 전달할 뿐만 아니라 에지에서 데이터 처리를 수행할 수도 있습니다.
TIDA-01081 — 머신 러닝을 위한 LED 조명 제어 레퍼런스 설계
TIDA-01621 — 서보 드라이브 및 로봇용 전류 조정을 지원하는 스마트 홀딩 브레이크 컨트롤러 레퍼런스 설계
TIDA-03031 — 25W PLC 컨트롤러 유닛을 위한 입력 보호 및 백업 전원 공급 장치 레퍼런스 디자인
TIDA-03031 레퍼런스 설계는 일반적인 PLC 컨트롤러 유닛에서 입력 전원 경로 보호 및 백업 전원 공급 장치 설계를 위한 솔루션을 제공합니다. 기존에 사용되던 이산 회로 구현을 완전 통합 보호 회로로 대체합니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN (RHF) | 24 | Ultra Librarian |
| HTSSOP (PWP) | 16 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.