TPS2596
- Wide input voltage range: 2.7-V to 19-V
- 21-V Absolute maximum
- Low On-Resistance: Ron = 89-mΩ (typical)
- Active high enable input with adjustable undervoltage lockout (UVLO)
- Overvoltage protection options
available:
- Fast overvoltage clamp (3.8-V, 5.7-V and 13.8-V pin-selectable thresholds) with a response time of 5-µs (typical)
- Adjustable overvoltage lockout (OVLO) with a response time of 1.3-µs (typical)
- Adjustable current limit with load current monitor output
(ILM)
- Current range: 0.125-A to 2-A
- Current limit accuracy:
- ±10.4 % (maximum) across current range
- ±5.5 % (maximum) at 1-A current limit
- Immune to Electrical Fast Transients (IEC 61000-4-4)
- Adjustable output slew rate control (dVdt)
- Overtemperature protection (OTP)
- Fault indication pin (FLT)
- UL 2367 recognition (pending)
- IEC 62368 CB certification (pending)
- Small footprint: 4.91 mm x 3.9 mm SOIC package
The TPS2596xx family of eFuses (integrated FET hot-swap devices) is a highly integrated circuit protection and power management solution in a small package. The devices provide multiple protection modes using very few external components and are a robust defense against overloads, short circuits, voltage surges, and excessive inrush current. Output current limit level can be set with a single external resistor. It is also possible to get an accurate sense of the output load current by measuring the voltage drop across the current limit resistor. Applications with particular inrush current requirements can set the output slew rate with a single external capacitor. For the TPS25962x variants, in case of an input overvoltage condition, internal clamping circuits limit the output to a safe fixed maximum voltage (pin selectable), with no external components. The TPS25963x variants provide an option to set a user-defined overvoltage cutoff threshold.
The devices are characterized for operation over a junction temperature range of –40 °C to +125 °C.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 | |
|---|---|---|---|---|---|---|
| * | 데이터 시트 | TPS2596 2.7 to 19 V, 0.125 to 2-A, 89-mΩ eFuse With Accurate Current Monitor and Fast Overvoltage Protection datasheet (Rev. A) | PDF | HTML | 2019. 8. 20 | ||
| Application brief | eFuses in Smart Electricity Meters | PDF | HTML | 2020. 9. 1 | |||
| Application brief | Single Point Failure Protection for Motor Drives and PLC Systems | PDF | HTML | 2020. 6. 30 | |||
| 인증서 | TPS2596 UL Certificate of Compliance IEC 62368-1 | 2020. 4. 10 | ||||
| 인증서 | TPS2596 UL Certificate of Compliance UL 2367 | 2020. 4. 10 | ||||
| 기능 안전 정보 | eFuse: Safety Certification and why it Matters | 2020. 3. 18 | ||||
| e북 | 11 Ways to Protect Your Power Path | 2019. 7. 3 | ||||
| 애플리케이션 노트 | Minimizing System Down-time with Smart eFuses | 2019. 6. 12 | ||||
| 애플리케이션 노트 | Designing Low-Power Circuits (LPCs) using an eFuse for Household and Similar App | 2019. 6. 10 | ||||
| 애플리케이션 노트 | Achieve Bidirectional Control and Protection Through Back-to-Back Connected eFus | 2017. 12. 22 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPS2596EVM — TPS2596xx eFuse 평가 모듈
TPS2595EVM 평가 모듈(EVM)은 TPS2595 eFuse 장치를 평가할 수 있도록 완조립 및 테스트를 거친 회로입니다. EVM을 사용하면 다양한 부하 조건(0A~4 A)에서 TPS2595에 여러 다른 입력 전압(2.7V~18V)을 인가할 수 있습니다. 출력, 입력, 부하 전류 모니터 및 스위칭 파형은 EVM에서 모니터링할 수 있습니다.
TPS259620 Unencrypted PSpice Transient Model Package (Rev. A)
TPS259621 Unencrypted PSpice Transient Model Package (Rev. A)
SLVC788 — TPS2596xx Design Calculator
TVS-RECOMMENDATION-CALC — TVS diode recommendation tool
TIDA-010004 — 12V, 15W 전력 제한, 단일 드라이버 기반 스테퍼, 브러시드 DC 및 액추에이터 드라이브 레퍼런스 설계
TIDA-010008 — 그리드 애플리케이션의 과도 차단 기능을 위한 평면 클램프 TV 기반 레퍼런스 설계
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| HSOIC (DDA) | 8 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.