TPS2513
- Supports USB DCP shorting D+ line
to
D– line per USB battery charging specification, revision 1.2 (BC1.2) - Supports shorted mode (shorting D+ line to D– line) per Chinese Telecommunication Industry Standard YD/T 1591-2009
- Supports USB DCP applying
2.7 V on D+ Line and 2 V on D- line (or USB DCP applying
2 V on D+ line and 2.7 V on D– line) (TPS2513, TPS2514) - Supports USB DCP applying 2.7 V on D+ line and 2.7 V on D- line (TPS2513A, TPS2514A)
- Supports USB DCP applying 1.2 V on
D+ and D– Lines - Automatically Switch D+ and D– Lines Connections for an Attached Device
- Dual USB Port Controller
(TPS2513, TPS2513A) - Single USB port controller
(TPS2514, TPS2514A) - Operating range: 4.5 V to 5.5 V
- Available in SOT23-6 package
The TPS251xx devices are USB dedicated charging port (DCP) controllers. An auto-detect feature monitors USB data line voltage, and automatically provides the correct electrical signatures on the data lines to charge compliant devices among the following dedicated charging schemes:
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | TPS251xx USB Dedicated Charging Port Controller datasheet (Rev. D) | PDF | HTML | 2018. 8. 8 | |
| 애플리케이션 노트 | Effective System ESD Protection Guidelines:TPS251x USB Charging Port Controllers | 2016. 7. 19 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPS2513EVM-527 — TPS2513 듀얼 채널, 자동 감지 USB 충전 컨트롤러 평가 모듈
TPS2513 Unencrypted PSpice Transient Model Package (Rev. A)
PMP10478 — 태블릿 및 스마트폰용 85VAC~265VAC 입력, 5V@30W 듀얼 포트 충전기 레퍼런스 디자인
This reference design is capable of charging two devices at 2.5A each with over 82% efficiency. The UCC24610 synchronous rectifier controller and CSD17312Q5 FET reduce the rectifier loss and provide high efficiency with a minimal increase in cost. The TPS2561A provides accurate and independent (...)
PMP10885 — 85-265VAC 입력 5V의 4.8A 듀얼 포트 USB 충전기 레퍼런스 디자인
PMP10885 레퍼런스 설계는 각각 2.4A로 두 대의 장치를 동시에 충전할 수 있습니다. UCC24636 동기 정류기 컨트롤러와 CSD18531Q5A FET는 정류기 손실을 줄이고 비용 증가를 최소화하면서 높은 효율을 제공합니다. TPS2559는 각 포트에 대한 정확하고 독립적인 전류 제한 보호 기능을 제공합니다. TPS2513은 충전 중인 모바일 장치와 통신하여 대부분의 휴대폰 및 태블릿 모델에서 충전기를 사용할 수 있도록 합니다. 이 컴팩트한 설계는 부피가 1.3" x 2.4" x 0.9"에 불과합니다.
PMP10974 — 89% 이상의 평균 효율성을 지원하는 범용 AC 입력 5V/10A/50W PSR 플라이백 전원 공급 장치 레퍼런스 디자인
PMP10974 is a quasi-resonant Flyback power suppy based on the UCC28730 primary side regulation (PSR) controller. The elimination of optocoupler using PSR topology promises higher reliability and lower system cost. The design achieves less than 40mW standby power losses and over 89% average (...)
PMP9402 — 소형 듀얼 2.5A USB 차량용 충전기 레퍼런스 디자인
PMP9402 is a dual USB car charger. This design utilizes the LM3150, TPS2561 Dual Channel Power Switch and a TPS2513 USB Dedicated Charging Port Controller. This design operates from 6 to 40V in. The output is set to 5V; both channels have a 2.5A current limit. This design has a switching frequency (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOT-23 (DBV) | 6 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.